Error: "IP works6.dll is not found" while trying to connect to Internet

Similar Questions

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• iertutil.dll was not found after trying to download internet explorer 8. I can't get into my computer. Not even the start screen.

  I can't get into my computer.  All I can get is the Task Manager.  It shows all my still intact material, I'm not him.  Not even to my home screen.  All that appears is my screensaver and a message saying to re - install iertutil. DLL... but how to do when I can't.

  Maybe someday, we will see again the proposal to:

  Once you open the Task Manager try the commands below.

  1. in the Task Manager, click file, and then click new task

  2. now type rstrui.exe and click OK

  This would launch the system restore on the computer refer the below Microsoft article more about the restoration of the system.

  If you really try , you would find that it does not work because rstrui.exe is unlikely that never will be in the PATH statement.

  If you want to launch the restoration of the system from the Task Manager, you will need to perform a new task like this:

  %SystemRoot%\System32\restore\rstrui.exe

  If c:\windows\system32\iertutil.dll is missing, you will see a message like this:

  Explorer.EXE - unable to locate component

  The application has failed to start because iertutil.dll was not found.  Re-installing the application may fix the problem.

  Because explorer.exe is not running, you will see only your background image /, but Ctrl-Alt-Delete will always bring up the Task Manager where you can maneuver around and replace the file.

  If the only problem with your system, it's that iertutil.dll is missing, you can replace the backup copy in the dllcache folder.  You can continue to obtain reviews iertutil.dll is absent, but just click OK for messages of recall as they pop up so you can continue working.

  One might think that you use the Task Manager, you can browse c:\windows\system32\dllcache and (after choosing to view all files) copy the iertutil.dll from there and then paste the iertutil.dll file in c:\windows\system32 where it belongs.  That actually works, but it seems that it does not work as you will get an hour glass stuck on the paste operation and perhaps wonder whether or not it has actually worked.

  To feel better replace the missing file, so you can actually see the file being copied and replaced... Task Manager, click file, new task and enter in the box (assuming that Windows is installed on your C drive):

  cmd

  Click OK to open a command prompt window and first make a copy of the original file (if it exists) by entering the following command:

  copy c:\windows\system32\iertutil.old c:\windows\system32\iertutil.dll

  That copies the file in progress if there is an and it will just complain if it is not a copy.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, copy the backup copy of the missing file and replace the missing or suspicious file by using this command:

  Copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Type "exit" to close the command prompt window.

  Who will replace the missing or suspicious file and if that's all that's wrong with the system, Shut Down box Task Manager, you can choose to reboot your system and see how things are going.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Search page does not. When I click on the blue writing take research, it says server not found after trying to connect.

  I am running XP using firefox (SERVER NOT FOUND) also tried IE (PAGE NOT FOUND or some THING LIKE THAT SAME PROBLEM AS FF WORDED DIFFERENTLY) only the address bar will allow me to do the research. When I click on the blue writing on page research he always says server not found. Need to copy and paste website address or manually type in the bar. System Restore said I need to contact my domain administrator to access, what's new. Also even when you use the firefox address bar began to plant on a regular basis. Clean the cookies and cache without change. Tried a few other things start and run reset win socks or something don't me remember now has failed. Also a CBC site I just think appeared at a closed point, but he continued to hear that it works with no visual representation on screen had to reload. Tried changing to IE and changed to yahoo from google without change. This server not found - cannot find 1clicksearch.p.info or something. Check the line workoff checkbox is not a factor. Any help would be appreciated. Also, using service pack 3. I also tried an older version of firefox before IE, I noticed also wasn't yet cleared all the info like bookmarks which would focus on the old version. Not looked at proxy made no difference to no automatic option tried proxy. I did a lot of research using the address bar and search pages site address I found similar problems on son but not what I treat exactly. Also when I type in the box on the google page often the google search button and the button enter won't take me to the search page and I have to use a top bar or hit, I feel lucky. This last problem, according to me has been on for a while, but not much more than a problem.

  Hello

  Please provide us with accurate and complete error messages that you receive.

  Try the steps outlined in the article below and check out them.
  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer
  http://support.Microsoft.com/kb/956196

  For any problem with Firefox, please contact their support team.
  http://support.Mozilla.com/en-us/KB/error%20loading%20Web%20sites

• object was not found while trying to install lightroom

  Wow, adobe support is really bad. I have not used all the products adobe over the years. I finally decided to try Lightroom, he bought online and I'm unable to install. I get the error message "object not found".

  I've seen a lot of these same questions on the web, but not a resolution... Any ideas?

  Thank you, but I thought about it. It seems that Microsoft Updates-ITMU installed a patch that prevented the installation program to function properly.

• AT100 keeps restarting while trying to connect to internet

  Hello

  My partner has recently acquired an AT100 Tablet and it was working fine last night. Since then, the internet has been restarted and now, as he tried to connect to the internet (about "" obtain IP address"), it restarts. Every time. If anyone has any suggestions that do not begin with "Run a factory reset", I would be grateful. I really don't want ot have to perform a factory reset to each time the modem/router is turned off.

  Thank you
  Michael

  Maybe this has happened due to the reset of the router WLan
  If in cases that it would happen again, check the Wlan configuration in your Android settings.

• Re: Satellite C660-1LD blue screen while trying to connect to internet

  I had a lot of trouble trying to get my laptop to connect to internet, when I was trying to solve it, the blue screen appeared and it stops, I didn't have enough time read all the information so I don't really know why it appeared. The laptop has rebooted and still cannot connect to our wireless network, I tried many restorations system that could not realize even though I tried it after I turned off my AVG protection.

  Finally he connected and I was able to go on the internet for a short period of time with a very temperamental connection, disconnect and then again after about 15 minutes, I fought so he can connect again, but when I finally made the connection seems well and does not drop.

  I stopped it and when I turned it back I had the same problem again, it wouldn't connect, the store could not solve the problem, although several times he has identified the problem as a "problem with the wireless adapter. I tried everything I could think of, more system restores, re - install the "network adapters" in the Device Manager, change the maximum power for the wireless adapter options and check the computer does not turn off the current record, remove all the wireless networks and then try to reconnect to their. After about 2 hours, I managed to get it to connect again after the restart it in safe mode and the connection is good now.

  But I'm afraid I'm having this issue whenever I turn my laptop to go on the internet. I am also very concerned about the "blue screen" which came, it happened yet and it was the first time I have ever seen one and I have been informed by friends that his pretty severe and is known as the 'blue screen of death '. I don't know if it's something to worry about or if it's just a stop? Is it possible that my laptop could have some kind of virus or bug? Or a possible hardware problem? Any help or advice would be greatly appreciated.

  I'm fairly certain that there is a problem with my laptop and not on the wireless network I can access the internet on my iPhone and internet works perfectly on all laptops of my roommate.

  Thank you

  Hello

  You should not worry BSOD. I guess that the reason was a software conflict.
  Are you using the original OS that you got with your laptop or your own installation of the OS?

  Have you noticed this problem with WIFI only?
  You can use LAN?
  Have you tried to test with another router and other WLAN?

• Msver71.dll is not found

  After hard drive replaced, I was unable to access, security cameras in construction. I typed in IP who works on another terminal, but received error message "Msver71.dll is not found." Where I can I find/download safely this .dll?

  You probably have multiple copies on your PC already. Do a FULL seardh. To search for the folder C: whole disk in Vista go to start / search and type in ' or '. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.

  If you find several copies, one that must be replaced is probably in C:\Windows\System32 (although I'm not sure of that - I don't know that there is usually a copy so if there is not a single moment then movement it will probably solve the problem.  Here's the problem, it's what you put here the correct version?  If you replace all copies, make sure they are EXACTLY the same (same version, same size, same create date, same everything).  But in this case it is said it is impossible to find which means he expects a copy in case there are currently - and that could be anywhere (unless the error message provides more information on where it is absent of that is the EXACT and WHOLE message?). It also lets you choose the right version, a guessing game.

  You can probably find a good copy to this place (if it is not there) of the Installation of Vista disk to help:http://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  I would contact the building security camera people and tell them the problem and maybe they can tell you where he's looking for the file.  Even if we get the file and even if it is the correct version of the file, we need to know where to put it to make this problem disappears.  Depending on how much is on other systems (and if they also use Vista) then maybe you can copy on everyone in the proper location on the computer that does not work (at least the ones that are missing).  It's an option but keep carefully note what you're doing and move the correct versions to the correct locations. If it doesn't work or causes other problems, you may need to remove in order to restore the system to its original state, where it is the only problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157