Re: Satellite C660-1LD blue screen while trying to connect to internet

Similar Questions

• Satellite C660 becomes blue screen on playback of videos

  Hello

  My Toshiba laptop windows7 64-bit (model name: Satellite C660-249-Ref.: PSC1GE) still get a blue screen when playing movies / youtube / DVD.
  I have same thousands of times reinstall portable mine and put the factory by Windows startup settings.
  I also have the latest Adobe installed on it and display drivers installed on AMD site and the homepage of Toshiba.

  I'm sick of it.

  Sincerely,

  RRAP Singh

  Graphics card can be the troublemaker.
  Have you tested the feature play games?
  It will be interesting to know if the same problem occurs again and again.

• Satellite C660 shows blue screen (memory management)

  I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.

  There suddenly restart with blue screen (memory management).

  > I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.
  Why wait so long? You may contact Toshiba service whenever you want and ask for help, or at least for the good advice.

  Have you tried to do something about it?
  Clean installation of recovery maybe? Have you noticed this error when the laptop works with the factory settings?

• Satellite C660 and blue screen

  Hey,.

  So after trying to install the bios update v 1.30 in the toshiba bulletin board blue screen appears for only a second, and then the computer restarts after you restart it asks "Unexpected Windows shut down, searching for solutions" additional info:

  Issue name: blue screen
  Version of the OS - 6.1.7600.2.0.0.768.3
  ID of locale - 3081

  BCCode - e4
  BCP1 - 00000001
  BCP2 - 8AB1FCA8
  BCP3 - 00000000
  BCP4 - 00000000

  OS version - 6_1_7600
  Service Pack - _0_0
  Product - 768_1

  Files
  C:\windows\minidump\060111-31590-01.dmp
  C:\users\teejays\appdata\local\temp\wer-68936-0.SysData.XML

  ADWARE TRACKING COOKIE.

  any advice with this problem would be appreciated muchly.
  Thank you, Oliver.

  Stand by.
  You can start your laptop properly?
  You can use the preinstalled operating system?

  Blue screen appears when you try to update the BIOS only?

• Re: Satellite C660 - after the BIOS update can not connect to Internet

  Hello
  I've recently updated my BIOS on my Toshiba Satellite C660 1.70.
  Everything goes well, but when I rebooted and tried to connect to the internet, he could not.

  I thought that there was a temporary error, but it's been 3 months and it has still not repaired.

  Can you help me? Thank you!

  Have you tested with WLAN and LAN connection?
  Have you noticed the same problem using two connections?

• Satellite C660-1ME - sometimes more often hangs when connecting to internet

  Hi, my laptop is Satellite C660-1ME

  It blocks sometimes more often while connecting to the internet, and several times when I m working in eclipse IDE.

  The shot is so that everything is locked, same mouse doesn't have a movement and Ctrl + Alt + Delete does nothing and finally I have to hold the power button until it has adjusted or pull the power cable on.

  Everyone this experience or know where is the problem?

  Hello

  The description of your problem is too general and it is not easy to understand what exactly you do.
  Connection of internet statement is not easy to understand. Who knows what kind of connection use you page your visiting or whatever you usually do.

  Have you noticed this problem on the first day?
  Are you using the original OS that you got with your laptop?

  Where to start our discussion?

• AT100 keeps restarting while trying to connect to internet

  Hello

  My partner has recently acquired an AT100 Tablet and it was working fine last night. Since then, the internet has been restarted and now, as he tried to connect to the internet (about "" obtain IP address"), it restarts. Every time. If anyone has any suggestions that do not begin with "Run a factory reset", I would be grateful. I really don't want ot have to perform a factory reset to each time the modem/router is turned off.

  Thank you
  Michael

  Maybe this has happened due to the reset of the router WLan
  If in cases that it would happen again, check the Wlan configuration in your Android settings.

• Error: "IP works6.dll is not found" while trying to connect to Internet

  Original title: I can't connect to the internet and the error reads "IP works6.dll is not found" what it means and how to fix

  the error indicates "IP works6.dll be found" appears whatever that means and how do I do I ran a debugging and then said create instances private requests X controls var pMcciNetPing = new active x object (McciNet.McciNetPing) active object

  Hi Gary M_756,.

  Follow the suggestion given in the post following "Pegasus [MVP]" to solve the problem:

  ipworks6.dll

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Satellite C660-1LD is super slow

  Hello

  I'm having a problem with my Toshiba Satellite C660 - 1LD PSC0QE

  Let me share the problem.

  So I have to use without the battery, most of the time when sudden power failure happens my laptop turns off also. Then I have problems starting upwards just on the black screen. I tried to change the memory in different locations, a disk check HARD and troubleshooting. The last thing I did was to reformat the HARD drive and tried to reinstall windows. Here are my observations:

  -My SATA in the bios configuration is DCIS, so windows tells me that it cannot detect any partition bootable windows installation is not possible to any partition of my HARD drive, but if I move the SATA configuration BIOS compatibility and windows continues to be installed on any partition that I want.

  I thought all right but, when windows are complete its installation suddenly an error pops up

  Now I don't know what to do. It's so frustrating. Then I accidentally inserted the recovery media and the laptop start booting from the disk and install windows and restore it to the factory with its bundled software setting.

  Now, here's the problem. It's so slow. Even the andbootup of starting Windows isso slow it would take 30 minutes just to start. the mouse cursor reacts accordingly except when you open a program or by clicking on the right button takes 10 minutes. Everything is so slow. Now I don't really know what to do.

  Now I am trying to reinstall all drivers and utilities with the latest versions. But I do not get a positive response. Is it a hardware failure? Is it because the SATA setting in bios was put on compatibility, although the default is ACHI?

  I still have to reformat? Help please.

  My advice to you is to use the recovery image only. By default the BIOS settings and install the OS by using recovery media. Recovery image contains all the necessary drivers, tools and utilities, so you'll have perfect configuration OS.
  What you need is small optimization of BONE.

  Take some time and read http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
  It's old NET, but the principle is the same on the new machines too. As a small test remove application preinstalled antivirus and check if startup is faster.

  Please send comments.

• Try to update the graphics driver for Satellite C660-1LD

  Hi all

  So I'm trying to update my graphics driver on a satellite C660 1LD, and I'm going nowhere quickly.

  The current driver I have is version 8.15.10.2622
  Site Web from Toshiba offers the 8.15.10.2189 version which I'm inclined to believe this is an older than my current version?

  I tried downloading the new version on the Intel site but it does not work either and I can't really figure out what the new version of the site. Can anyone offer advice on how to achieve this?

  The trouble is that I've lived this process for more than a year to fix a bug on civilization 5. I remember that it is a bit of a headache then. The most annoying is that I don't remember the process that I had to pass by to do. DOH!

  Thanks in advance

  Tom

  Hello

  In General, you should only use the drivers from Toshiba. Why? The drivers offered on the Toshiba support page are tested and adapted to work with the s portable equipment. Of course, you can use the GPU manufacturers support page drivers, but you should know that most recent drivers will increase performance GPU. More performance means more heat and also some risk for material.

  Result can be suddenly stopped downs or even damage the hardware.
  In any case, I hope that you are satisfied with the performance of the GPU with your latest driver so I don't understand why you want to update the current version. Be happy that everything works well with this version of driver is not supported.

  In any case, I m you know that everything you do is at your own risk you can do with your computer laptop all you want. I found an interesting article that can help you.
  Check it out please - http://www.intel.com/support/graphics/sb/cs-033915.htm

  Good luck

• Re: Satellite C660-1LD - Touchpad no longer works

  Hello

  I'm having this problem because more than a month now, the touchpad works all of a sudden and it starts to work after a reboot, and sometimes after a few reboots.

  The frequency of this issue is at least twice an hour. I'm really tired to restart all the time.
  I tried the system restore, but that did not help and the function keys do not work or the other.

  Details:
  Model: SATELLITE C660-1LD
  OS: Windows 7-64 bit
  : Warranty 03/2013

  > I tried the system restore, but that did not help

  What exactly do you mean by restoring the system?

  Have you used the Toshiba Recovery DVD or Toshiba HDD Recovery procedure to restore the laptop to factory settings?
  In the case where you don't who has not tried, I recommend doing that!

  The fact is that this recovery procedure should solve the problems of system/software and in my opinion, it looks more like a software like a hardware problem.

• CrazyTalk 6 does not work on my Satellite C660-1LD

  I just bought a Toshiba Satellite C660-1LD with Windows 7, but cannot run CrazyTalk 6 thereon.

  Whenever I try to run the program I just get a message saying "CrazyTalk 6.2 main program has stopped running". I have tried all the solutions of reallusion and been in touch with iYogi but nothing works.

  Does anyone have any suggestions?

  Hey cool, thanks for your comments!

  You re welcome in the forum :)

• Satellite A100-192: blue screen during the installation of Adobe Premiere

  Hi, I need some help ASP...
  I bought a satellite A100-192 intel duo 2500 T with 100 GB hard drive and 1024 MB 533 memorry also has a vga ATI 1600 hyoer 512 MB memory,
  Try to install the first pro, but I got a bluescreen scrable.
  Can this program somehow in this laptop? any help is welcome...
  Thank you...

  Hi Theodor,

  I suggest that you try to reinstall your copy of Adobe Premiere, and if you still get the blue screen when trying to take note of the error message, since this will give you some clues as to the nature of the problem.

  If the blue screen appears too fast and forces the phone to reboot then just right click on the 'My computer' icon and select 'Properties', then click on the "Advanced" tab and in the "Startup & recovery" section click the "Settings" button In the next under the title of "System failure" screen make sure that the option restart automatically is not checked.

  Kind regards

• Satellite C660-1LD - I want to add 4 GB of RAM

  Hello!

  My model is Satellite C660-1LD.
  I want to add 4 GB of RAM to my laptop.

  There are now 4 GB RAM DDR3 *(1066MHZ) * on my laptop.
  I can add, or is it better to add 4 GB RAM DDR3 to the second slot with *(1333MHZ) *?

  And how often my computer will work? (1066 mhz or 1333 mhz).
  As better RAM to add (brand, frequency) you think?

  Also the RAM I found is not buffered, does that mean?

  Thank you!

  > Can I add, or is it better to add 4 GB RAM DDR3 to the second slot with *(1333MHZ) *?
  It depends on your chipset.
  If your chipset supports 1333 Mhz RAM then works with maximum performance, otherwise it would be clocked up to 1066 Mhz.