prevent itunes from start in the windows of time 10

Similar Questions

• I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  How do you know that she can always use Facetime?

  Could she learned/guessed the password restriction?

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• How can I move my itunes from imac to the new imac 2011?

  How can I move my itunes from imac to the new imac 2011?

  Click here and choose the option that best fits your situation.

  (137663)

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• Fingerprint reader not working not not upon awakening from sleep for the windows login

  Hello
  I have a new T540P with a validity fingerprint reader.

  About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.

  I tried many things

  -uninstallation/installation of the device in the Device Manager and finger print manager pro software

  -prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints

  -disabling "allow windows to turn off this device to save power" in Device Manager.

  Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.

  Is it a matter of broad platform affecting all models of T540P? It's frusterating.

  
  

• Is there a setting that I can activate to prevent users from turning off the computer?

  How prevent we Shut Down

  How do you define a computer or a user to prevent shutting down the computer. ?
  I had an account with complete administration and he's doing a backup of Windows, but the other user is allowed to force closing down since the other user is always log-in (locked).

  Is it possible to prevent users not to shut down the computer if another user is connected? I know it is the settings where you can change the Start Menu, but it is not good enough.

  Alan

  Hello

  I suggest you follow these methods and check.

  If you have Windows 7 Ultimate or Professional Editions follow method 1, if you have Windows 7 Home Premium or lower editions go to method 2

  Method 1: Change the settings of group policy and see.

  You can configure the policy setting determines which users can shut down the local computer. Navigate to the following location in the Management Console (GPMC, Group Policy),

  Click the Start button, type gpedit.msc in the search field.

  Navigate to the following location:

  Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\ Shut down the system

  Double click stop the system, select the user group you want to disable and click Remove > apply > OK.

  Simply restart your PC and connect users to check if the function disable and remove Shutdown account works.

  Method 2:

  a. must turn off and remove Shutdown option by using the registry editor.  Open the registry editor, navigate to the following path: HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  b. Select Explorer in the left pane, right-click in the right pane and select new > DWORD; then name it as NoClose.

  c. double-click NoClose, and replace the value Hex 1; Click OK, and then close the registry editor.

  d. restart, you'll be able to disable and remove the Windows 7 Edition stop Home Premium or less in this way.

  I hope this helps!

• I'll be able to hide/remove the start in the windows 8.1 Update button?

  I've gotten quite used to the start screen in windows 8 me is much faster and more beautiful than a start button. So I was wondering if it would be possible to hide or remove the Start button from the new 8.1 update?

  Try this program that will do what you want: http://winaero.com/comment.php?comment.news.215

• How to start using the Windows XP cd?

  Can someone tell me how to start using my Windows XP cd (I don't know what it is). I have XP Professional on Lenovo ThinkCenter. Also how to enter to the Recovery Console (not sure how to do this). Thank you

  OK it's on my other desktop Lenovo ThinkPad ThinkCenter A61 model type 9120CT 0, with XP Professional. This calculation allows to logoff users once they have logged in. So I went in Rescue Recovery 4 and has a completely restored system since the last backup. There was a widow of MISTLETOE and a button to select. It wasn't a problem because we did not all pictures stored in this computer. (Thank God!).

  Now at least user can connect, go to Windows Explorer, Internet Explorer etc...! I'm still trying to understand if there are other problems outstanding. So far have not found any :)

  Thank you for giving me encouragement barely pull these questions, especially since I have never fixed before computer problems. Just by chance, sometimes I have 2 laptops and 3 desktops desktop PCs. And I could just not afford constantly hire someone to solve.

  Just one last question, what is the combination of anti-virus software do you recommend me to use?  Thanks again.

• Failed to start after the windows logo screen, please help.

  Original title: STARTUP DO NOT FULLY

  Hi, I run windows XP Home Edition on my laptop, when I switch it on it boots until the windows logo and no more, can anyone help please.

  I tried F11 to safemode etc but is still no more than the windows logo.

  You must be repeatedly tapping / pressing the F8 key before Windows starts to load to access the Advanced Boot Options menu to see the Safe Mode options :)  Keep and tapped F8 until you see the Advanced Boot Options menu.

  If you miss the niche F8 and XP starts to load, you missed it, and you have to start over.

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Why pc does not start, and the windows logo hangs after installing the update?

  often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.

  Hello

  Method 1:

  I suggest you to use the Windows Vista disc to perform a Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2:

  If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.

  http://support.Microsoft.com/kb/934540

• How to remove scratches from image by the window

  Slept at the Hilton hotel in St. Louis in front of Busch Stadium and had a wonderful view of the stage of our room. Took some photos of day and night, but it seems that the Hilton is not too outside of washing windows. Therefore, my day and night photos have streaks of dirt on the windows and are pretty useless unless I can remove the streaks in any way in Photoshop. I have access to PS5 or 6. Bright ideas about how this is possible, or not at all? Thanks for any help in advance. I don't see anywhere to attach a picture or I'd do it in the interests of clarification and someone else take a stab at it.

  Regarding the striations, CS5 and 6 has a spot corrector. Sometimes, this will help you, it will depend on what is close to him. If you hold the mouse button on top of the spot Healing Brush tool in the toolbar, a Launcher opens where you can select other tools that can help. Play with them and see what they do before you start it on your image.

• Quicken - the installation program must be started by the Windows program manager

  I used the special edition of Quicken 2002 on multiple computers - which this one with Vista for 3-4 years.  I accidentally deleted and tried to reinstall it.  Using the installation application, the system makes the installshield, then stops and says "this program must be launched by the Windows program manager."

  Any ideas?  Thank you!

  You say that it works OK.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=Quicken%202002&v=Intuit&UID=&PF=5&PI=9&c=business%20%26%20Home%20Office&SC=small%20Business&OS=32-bit

  But read the above.

  I suggest you contact Quicken.

  See you soon.

  Mick Murphy - Microsoft partner