error itms-9000 when you submit the Viewer

Similar Questions

• Error with reCAPTCHA when you submit the form on Business Catalyst hosted on site

  Hello

  Just had a client complain that the online form on their site of MUSE is not properly presented. When I tested myself for reCAPTCHA image verification is neglect and throw an error on a new page.

  As this is a site of BC hosted, the form no longer requires a verification key (it was previously hosted elsewhere until recently).

  I discovered from what happens on another of my sites... Any ideas please?

  The error I see is:

  ERROR: An error has occurred. The image verification failed. If you believe it is incorrect, please contact your system administrator or go back and re - submit the form

  
  

  
  

  There may be several reasons for this captcha or recatcha them included in the form, no editing html with form etc. including.

  Please provide the url of the page where the form is inserted so that we can check on our end, also have you tried re - insert the form and then check or update the new site of Muse in BC?

  Thank you

  Sanjit

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Error returned (sometimes) when you use the tag < cfxml >

  I have a problem when you use the < cfxml > tag, its seems error when I try and view the XML over a certain length, because it works for some of my folders and others do not.  Is there a known displaying stuff in the cfxml tag size limit?

  Here is my code, I don't know how to move forward on this issue. Well, any help would be apprciated.

  Right.

  It is therefore being truncated when it is read in the DB.  Nothing to do with CFXML.

  Looks like it is hitting the size of the Long text buffer (which by default is 64 KB).  Increase this value (in your DSN settings, advanced).

  --

  Adam

• Implementation for the Apps Error signature: "ioexception when you save the new key pair".

  I'm following the instructions of setting up registration your apps: https://developer.blackberry.com/html5/documentation/signing_setup_smartphone_apps_1920010_11.html.

  After typing the password and move the mouse around, I get a message, "ioexception when you save the new key pair". BB forums say that the problem is that my JDE is not installed, but it is. I'm also not using windows 7. Does anyone know how to fix this?

  As for all my messages, within the hour to ask, I always find the solution.

  http://ekkescorner.wordpress.com/blog-series/blackberrydev/secure-development-of-blackberry-applicat....

  However, it is normal that the instructions on the page webworks lack incredibly. I went with anger poster yesterday on the development of how awful all for blackberry is, and how absurd it is that there is no phone tech support. I decided yesterday against him because I felt bad for RIM as they seem to get into financial trouble. I've been on the fence about BB, and I tried to tell my friends that the newest smartphone looks like it could be promising. While it is true, I have not developed for BB 10 again, if it's developers resources also lack 7 are, I have no doubt that soon she will fail and I will give is more no support.

• I get the error code 80070005 when you click the Windows Automatic Update button.

  Basically, the title says it all. When you click on the button to auto update error code 80070005 arrives. What should I do?

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• Error beep sound when you open the color picker in Illustrator

  Hello

  I have a strange problem. Every time when I double click on the color picker in illustrator, I hear a boring. It's the same when you make a mistake, only then I get a dialog box with information about the error. The color picker appears and flashes at first. It works normally. I got turned down the volume, but of course that is not a solution. Anyone has any idea what it is?

  On my laptop, it works fine.

  Thanks in advance.

  Mark

  OK, I fixed it. I changed the workspace and he again changed back and it has been resolved. So, we'll probably never know what happened. Thanks fot your time.

  Select this option.

• Error ORA-00979 when you run the SQL in Oracle 11.2.0.3

  Hi Oracle Experts,
  
  
  I am trying to execute a SQL statement which consist of 2-3 levels of inline queries. Part of this SQL statement is as below:
  

  SELECT
        "SAMPLE_RESULT"."PROPERTYID",
        "SAMPLE_RESULT"."QUALIFIER",
        ROUND(AVG(SAMPLE_RESULT.RESULT),2) avg_result,
        AVG(DECODE(SAMPLE.QUALITYSTATUS, 'P', 1,'F', 5)) qltystatus,
        TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy') sampledt,
        TO_CHAR("SAMPLE"."SAMPLEDT",'rrrr-mm-dd') sortdate
        STD.stdev,
        getCL.cl
      FROM
        (
          SELECT
            ROUND(stddev(INS.avg_result),2) stdev
          FROM
            (
              SELECT
                "SAMPLE_RESULT"."PROPERTYID",
                "SAMPLE_RESULT"."QUALIFIER",
                ROUND(AVG(SAMPLE_RESULT.RESULT),2) avg_result,
                AVG(DECODE(SAMPLE.QUALITYSTATUS, 'P', 1,'F', 5)) qltystatus,
                TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy') sampledt
              FROM
                "SAMPLE",
                "SAMPLE_RESULT",
                "ACTIVITY"
              WHERE
                (
                  "SAMPLE"."SAMPLEID" = "SAMPLE_RESULT"."SAMPLEID"
                )
              AND
                (
                  "SAMPLE_RESULT"."TESTINSTANCE" = fn_max_instance (
                  sample.sampleid, sample_result.testid, sample_result.propertyid
                  )
                )
              AND
                (
                  "SAMPLE"."ACTIVITYID" = "ACTIVITY"."ACTIVITYID"
                )
              AND
                (
                  ACTIVITY.VARIANTID IN ('Sales Gas','Contaminants End')
                )
              AND
                (
                  ACTIVITY.LOCATIONID = 'S-5003C'
                )
              AND
                (
                  SAMPLE.EVENTID <> 'AD-HOC'
                )
              AND
                (
                  "SAMPLE"."SAMPLESTATUS" = 'L'
                )
              AND
                (
                  TO_DATE(TO_CHAR(SAMPLE.SAMPLEDT,'dd-mon-yyyy')) BETWEEN TO_DATE
                  (TO_CHAR(:StartDate,'dd-Mon-RRRR')) AND TO_DATE(TO_CHAR(
                  :StartDate,'dd-Mon-RRRR')) + 6
                )
              AND
                (
                  SAMPLE_RESULT.PROPERTYID = 'GCV'
                )
              GROUP BY
                SAMPLE_RESULT.PROPERTYID,
                SAMPLE_RESULT.QUALIFIER,
                TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy')
            )
            INS
        )
        STD,
        (
          SELECT
            ROUND(AVG(INS.avg_result),2) cl
          FROM
            (
             SELECT
                "SAMPLE_RESULT"."PROPERTYID",
                "SAMPLE_RESULT"."QUALIFIER",
                ROUND(AVG(SAMPLE_RESULT.RESULT),2) avg_result,
                AVG(DECODE(SAMPLE.QUALITYSTATUS, 'P', 1,'F', 5)) qltystatus,
                TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy') sampledt
              FROM
               "SAMPLE",
                "SAMPLE_RESULT",
                "ACTIVITY"
              WHERE
                (
                  "SAMPLE"."SAMPLEID" = "SAMPLE_RESULT"."SAMPLEID"
                )
              AND
                (
                  "SAMPLE_RESULT"."TESTINSTANCE" = fn_max_instance (
                  sample.sampleid, sample_result.testid, sample_result.propertyid
                  )
                )
              AND
                (
                  "SAMPLE"."ACTIVITYID" = "ACTIVITY"."ACTIVITYID"
                )
              AND
                (
                  ACTIVITY.VARIANTID IN ('Sales Gas','Contaminants End')
                )
              AND
                (
                  ACTIVITY.LOCATIONID = 'S-5003C'
                )
              AND
                (
                  SAMPLE.EVENTID <> 'AD-HOC'
                )
              AND
                (
                  "SAMPLE"."SAMPLESTATUS" = 'L'
                )
              AND
                (
                  TO_DATE(TO_CHAR(SAMPLE.SAMPLEDT,'dd-mon-yyyy')) BETWEEN TO_DATE
                  (TO_CHAR(:StartDate,'dd-Mon-RRRR')) AND TO_DATE(TO_CHAR(
                  :StartDate,'dd-Mon-RRRR')) + 6
                )
              AND
                (
                  SAMPLE_RESULT.PROPERTYID = 'GCV'
                )
              GROUP BY
                SAMPLE_RESULT.PROPERTYID,
                SAMPLE_RESULT.QUALIFIER,
                TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy')
            )
            INS
  
        )
        getCL,
        "SAMPLE",
        "SAMPLE_RESULT",
        "ACTIVITY"
      WHERE
        (
          "SAMPLE"."SAMPLEID" = "SAMPLE_RESULT"."SAMPLEID"
        )
      AND
        (
          "SAMPLE_RESULT"."TESTINSTANCE" = fn_max_instance (sample.sampleid,
          sample_result.testid, sample_result.propertyid)
        )
      AND
        (
          "SAMPLE"."ACTIVITYID" = "ACTIVITY"."ACTIVITYID"
        )
      AND
        (
          ACTIVITY.VARIANTID IN ('Sales Gas','Contaminants End')
        )
      AND
        (
          ACTIVITY.LOCATIONID = 'S-5003C'
        )
      AND
        (
          SAMPLE_RESULT.PROPERTYID IN ('GCV','SG','T. Sulphur','Dew Point',
          'HC Dew Pts')
        )    
      AND
        (
         TO_DATE(TO_CHAR(SAMPLE.SAMPLEDT,'dd-mon-yyyy')) BETWEEN TO_DATE(TO_CHAR
          (:StartDate,'dd-Mon-RRRR')) AND TO_DATE(TO_CHAR(:StartDate,
          'dd-Mon-RRRR')) + 6
        )
      GROUP BY "SAMPLE_RESULT"."PROPERTYID", "SAMPLE_RESULT"."QUALIFIER", TO_CHAR("SAMPLE"."SAMPLEDT",'dd-Mon-yyyy'), TO_CHAR("SAMPLE"."SAMPLEDT",'rrrr-mm-dd'),
      
        STD.stdev,
        getCL.cl
    )

  When I run the level the lowest and second lowest level inline queries statements, which consists of a select field of data and functions, there is no error and capable of generating the result.
  
  But when I run the statement which refer to the alias of queries inline (STD, getCL), it prompted an error ORA-00979 not a group by expression. This happened only Oracle 11.2.0.3. If I run the statement in another version of Oracle (11 GR 1 material and below), I am able to generate the result.
  
  Please advice how can I fix this problem.
  
  Published by: xysOra on 29 April 2013 19:37

  It seems that this should be the "SAMPLE" TO_CHAR conversions "" SAMPLEDT ".

  You seem to be willing to cut the time part of SAMPLEDT. The best way to do so is TRUNC (SAMPLEDT).

  In each of the groups of clauses, replace TO_CHAR ('SAMPLE'. ("' SAMPLEDT ', 'dd-Mon-yyyy') with TRUNC ('SAMPLE'. (' "SAMPLEDT") and completely remove the TO_CHAR ('SAMPLE'. ("' SAMPLEDT ',"dd-mm-rrrr") in the last group of.

  Replace in selection lists, TO_CHAR ('SAMPLE'. ("' SAMPLEDT ', 'dd-Mon-yyyy') with TO_CHAR (TRUNC ('SAMPLE'. ((' ' SAMPLEDT '), 'dd-Mon-yyyy') and replace TO_CHAR ("SAMPLE". "SAMPLEDT", "dd-mm-rrrr") with TO_CHAR (TRUNC ("SAMPLE" ".")) " "" "SAMPLEDT"), "dd-mm-rrrr").

  These changes can take you the ORA-00979 not one group by expression.

  Also the date manipulation is wrong — you do implicit conversions to date using default formats, when what you seem to want is to truncate the time part. Instead of

   TO_DATE(TO_CHAR(SAMPLE.SAMPLEDT,'dd-mon-yyyy')) BETWEEN TO_DATE(TO_CHAR
          (:StartDate,'dd-Mon-RRRR')) AND TO_DATE(TO_CHAR(:StartDate,
          'dd-Mon-RRRR')) + 6
  

  use

   TRUNC(SAMPLE.SAMPLEDT) BETWEEN TRUNC(:StartDate) AND TRUNC(:StartDate) + 6
  

  I hope this helps.
  David

• Automatically connect to the secure area when you submit the registration form?

  Is it possible to automatically open a session someone in a secure area when they finish the web registration form?

  We have created a web form that adds users to a secure area and we have redirected this form to our secure area desired landing page.  However, the landing page is promting the users to enter their login before information it will display the page.  Is it possible to automatically open a session in the secure area when they support the registration form (so that they automatically see the content of the page without having to connect)?

  Thank you

  Jason

  Hi Mario,.

  Thanks for your quick response.  I found the problem.  I am using a subdomain and the registration page as the start page for the subdomain.  For some reason, BC did not like this.  When I went directly to the page, it worked fine.

  -for example, when I went to the trituns.com/testregstration.html page, everything worked well and I could record and see the secured information.  (FYI - these aren't the actual URL - examples)

  -However, if I tried to go to testreg.trituns.com with the testregistrationl.html page to set as the start page for the subdomain, the system would allow me to fill in the electronic registration form and add me to the secure area, but it would not open automatically log me into the secure area.

  - As a work-around, I created a new redirect page that is the start page for testreg.trituns.com that takes people to the page complete trituns.com/testregistration.html.  ... This isn't an ideal solution, but it seems to work for now.

  Thank you

  Jason

• Error message appears when you select the link by e-mail, but there is no problem

  I've upgraded to Firefox 7.0.1. Now, when I select a link by e-mail to a Web site, I always get a failure General error message that Firefox is unable to reach the Web site. In the meantime, the line slim progress red light appears and the website is good. You error message still appears, but there is rarely a problem for a Web site. Any suggestions on how to remove the error message?

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Error 1162 occurring when you remove the menu item

  I am creating menus personalized in the MenuBar of a VI in LabVIEW 2010 and always 1162 error when I try to delete the entry "Rename the folder of screws" on the file menu. I can remove the entire menu and add it back to accomplish the removal, but I intend to keep some of the functions of the application level such as ' save under... ». Anyone has an idea why this happens? I tried to delete by name, (the two app_Rename the screw folder and rename folders of screws) and by number. Neither work. I have attached a screenshot of the VI and the error.

  Lenovo Think Center (core i7) M series computer

  under Windows XP

  Thanks for any help,

  Chuck

  I think that it is a tag mismatch too. Try to run Get Menu Item Info primitive by specyfing tag item 'app_File', then make sure that the output array "tags submenu" includes a string that you assign to remove.

• Error message appears when you open the link to Web sites in Windows Mail email: "windows cannot find [URL], make sure you typed the name correctly.

  Until a week ago, I got no problem with opening links in e-mail messages in Windows Mail.  I suddenly had problems with the opening of all the links in e-mail messages - when I click on the link, an error message reads "Windows cannot find [url], make sure that you have typed the name correctly and try again"... a window then opens with a white screen.  But it is not a problem at the opening of the page if I paste the link to the window.

  I also noticed that the problem resolves after a few attempts to open multiple links.   But after the reboot, the problem arises again.

  I am currently using Windows Vista Home Premium with Windows Mail; did an update today with Service Pack 2, ran full scan of the system with Norton (no virus) and did uninstall the Yahoo and Google toolbars (recommended by David O - engineer Microsoft Support responses - to another user in this forum with similar issues).  And I still have the same issues.

  THIS PROBLEM HAS BEEN RESOLVED - DUE TO INCOMPATIBILITY ISSUES BETWEEN SP2 AND NORTON.  UNINSTALL SERVICE PACK 2.

• Error importing metadata when you create the import profile

  Hi guys,.

  I am creating an interface to metadata (out-of-the-box) to Fusion (source) to a HFM application. I have successfully completed the following activities:

  -Registry system source

  -Configure entities accounting source

  -Initialize the source system

  -Target registry system

  -Create the import format (Fusion of application HTP) that corresponds to the account dimension in the target application the COA account segment from the source system.

  -Create the location, connected to the high import format

  -Create the metadata rule

  When I try to run the rule of metadata, it triggers the following error in the step "design EPMA import profile for dimension ERPI system profile 5:

  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  See below the FDM application log:

  2015-03-09 13:04:25, 716 [AIF] DEBUG: CommDim.getRuleInfo - END
  2015-03-09 13:04:25, 717 DEBUG [AIF]: AIFUtil.callOdiServlet - START
  2015-03-09 13:04:25, 941 [AIF] DEBUG: the registry has been found!
  2015-03-09 13:04:26, 006 INFO [AIF]: Services of EPMA Web URL: http://EPM11124V2:19000 / hyperion-bpma-Server
  2015-03-09 13:04:26, 007 [AIF] DEBUG: establishing a session now...
  2015-03-09 13:04:29, 523 INFO [AIF]: the session Id is: fa0ecc96-m-e2ee-f7be-8b8b6d0112d8
  2015-03-09 13:04:31, 305 [AIF] INFO: creation of profile import:
  2015-03-09 13:04:32, ERROR 451 [AIF]: error encountered
  2015-03-09 13:04:32, ERROR 453 [AIF]: error encountered
  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  ---End of inner exception stack trace---)
  2015-03-09 13:04:32, 489 [AIF] DEBUG: AIFUtil.callOdiServlet - END
  2015-03-09 13:04:32, 498 FATAL [AIF]: error in CommDim.loadMetadata
  Traceback (most recent call changed):
  Folder "< string >", line 4185 in loadMetadata
  RuntimeError: java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server could not process the request. ---> System.FormatException: input string is not in the correct format.

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  -End of the exception stack trace internal-

  2015-03-09 13:04:32, 568 FATAL [AIF]: error in the load metadata
  2015-03-09 13:04:32, 641 [AIF] INFO: end process FDMEE, process ID: 201

  I'm new type of debugging using FDMEE, but I am not mistaken, he finds a string where I shouldn't be finding a string somewhere in the metadata? I looked in the source system metadata, but I see not all metadata 'string. ' Could someone maybe advise and point me in the right direction on how to handle this error (which causes the error, where to look, etc.). Any help would be appreciated kindly!

  Kind regards

  Gerard

  Hello

  Looks like you might need to work on ensuring that FDMEE can talk to EPMA.

  Also take a look at the following doc:

  FDMEE: Export of metadata for EPMA fails (Doc ID 1633771.1)

• Error code: 1 when you install the creative Cloud Desktop application

  What can I do to fix the ERROR CODE: 1 I fallowed each step by step and when I try to run creative cloud apear code error 1

  Hello

  Please try this and share the results.

  Error: "unable to install". Creative cloud office

  Thank you

  Atul Saini

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads