Error loading appwiz.cpl__A dynamic initialization routine Link Library (DLL) failed

Similar Questions

• error 1114 dynamic link library (DLL) initialization of the routine failed.

  I can't connect to internet

  Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

  What is the solution to this problem everyone?

  Hello
  1 did you change on your computer before this problem?
  2. When you receive this error message?
  3. are you using Internet Explorer? If Yes, what version of IE are you running?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

   
  Follow the suggestions and check if that helps.
  Method 1
  (a) click Start .
  (b) in the search box type services.msc
  (c) right click on Diagnostic Policy service and go to the Properties.
  (d) select Auto under Startup type.
  (e) click Start .
  (f) click on apply and OK.
  (g)restart your computer.
   
  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 3
  You can perform the clean boot to see if a service is causing this issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual
  See also:
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

• "A dynamic link library (DLL) initialization routine failed." NVIDIA drivers

  So I recently wanted to install new NVIDIA drivers on my computer.  The installer downloaded completely and at the time where he finished extract the files of the error "a dynamic link library (DLL) initialization routine failed."  Since then, I uninstalled my drivers and I can't always install the new drivers.  Now I'm stuck with no driver at all.

  I asked this question on NVIDIA support page and have not received a response, so I came here to ask.  Help is very appreciated.

  Thank you

  I understand your willingness to help me, but I have advanced and reinstalled windows. Got the new driver installed and everything works fine.

  Thank you

• a dynamic link library (DLL) initialization routine failed.

  Original title: DLL routine failed

  I downloaded a program from CNET. Did not work so I removed it. A day or two later, I get the following error a lot.

  There was a problem starting

  C:\Users\EDITIN~1\AppData\Local\Temp\sbussnv\ssnyoyr\wow.dll

  a dynamic link library (DLL) initialization routine failed.

  I ran the auditor system and program files Microsoft security and found no integrity issues.

  At this stage it would be easier to upgrade to Ultimate (I use Professional now) that in order to understand the problem of the DOF. I guess the upgrade I will lose all files/programs, correct.

  Thank you

  Yes, that's correct Loran.  You can use the Professional disc window and perform the upgrade. This will put just the new copy of your computer's system files.

  But if you have the Ultimate version, you can use the ultimate disc or the ultimate product key to upgrade.

• Accidentally deleted a dynamic link library (DLL) file and the need to replace one possibly other system files - what is the best method?

  I did a system restore to a point before that my main user account has been established.  I had to set up a new user, and then it was suggested that to copy all the data of the user "existing" to the newly created user.  When I did this it's not well at all and some DLL files have been corrupted or deleted or not connecting correctly to the user of your choice.  I actually then did a restore of the system to the last restore point.  However, given that SR does not change the data, I was stuck with the wrong DLL and other system files.  I thought I had stupid test because I had backed up data.  I tried to restore to an earlier point (using Windows backup and restore).  Unfortunately the restore will not work and I get the following error: "a systematic failure of the initialization of the Dynamic Link Library (DLL).  I need to repair or replace the corrupt to get the system back and then protected files again.  I'd appreciate any help!

  Thank you

  In the case that he is a protected system file, you can check if you can always run the System File Checker

  http://support.Microsoft.com/kb/929833

  You can boot from a system repair disc to retrieve an image from the previous system that you have made.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• "error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module is not found" I'm cluelss and generally ignore this message. Should I try hard or leave?

  Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found

  I'm cluelss and generally ignore this message. Should I try hard or leave?

  Thank you

  This link may be a little more useful:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  What should I do to get the rundll error load it says this c:\windows\system32\swwagui.dll, but when I search it he says that it excist doesint

  yeremis,
  You don't need to download the help file.  So just follow the steps described in this article, that it will guide you through performing a clean boot.  The boot will start Windows without other programs startup.  This should stop any program that tries to use swwagui.dll.  Then you can go back and turn on startup one items at a time to determine which type of program is causing the problem.

  If the error persists while in a clean boot state then you should try a restore of the system forward when the problem started. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error loading c:\users\steve&jenny3\Appdata\roaming\pdiner.dll and my computer will not update! code 80246008

  Hello

  I keep having this message arrived on my computer when it starts:
  Error loading c:\users\steve&jenny3\Appdata\roaming\pdiner.dll
  I also can't add new software or windows updates. I checked the error code 80246008 and followed the steps but the BITs service does not appear in the services, so I don't know what to do.
  I tried to do the "Mr, fix" help on help from microsoft, but could not send information to microsoft to help me with my problem.
  Could someone help me please?
  A big thank you Jenny

  Take a look at this great site for some removal instructions. This is an alternative to the TDSSKiller

  For Root Kits (rather than TDSSKiller)

  http://public.avast.com/~Gmerek/aswMBR.htm

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Run dill error... Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access is denided, what, why? How can I fix it?

  Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access denied, what, why? How can I fix it?

  It started the night with a black screen and the white Messenger active but I was unable to do anything. Took me most of the day and night to be able to close completely portable!

  Today, I can start but now get the error posted above. I can't use one of my system tools, such as defragmenting, disk cleanup or fix it! Nothing.

  I'm not very computer savey when it comes to computer repairs, I rely on others or my Windows Vista "Simplified" book, and it does not cover this problem.

  Please, can you help me.   Thank you.

  Hello

  Google has nothing that suggests it might be the malicious program or a start remains entry against malware

  http://www.google.com/search?hl=en&source=HP&q=ifificawajurija.dll&aq=f&aqi=&AQL=&OQ=

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

  The PC boot-to top every morning, I get this message. Can I please ask for some advice on how I can solve this problem, thank you.

  Hello LewBut,

  I'd say go throught he link below and try the suggestions of the SpiritX MS MVP.  How long have you encountered this message when you start your computer?

  Error loading C:\...".dll" the specified module is not found.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-loading-CDLL-the-specified-module-could-not/c21f0647-98EA-4170-9fca-90b5fcc5273a

  In addition,

  DLL of enforcement, error loading

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/run-dll-error-loading/02dbc0c6-fed0-4B7E-97ab-1245e9f43939

  Thank you

  James

• Message at the beginning upward: Dynamic Link Library DLL is not found

  Hello all,.

  I'm a bit an IT numpty but all recently when my laptop starts it takes more time to start and I get the message: "Dynamic Link Library is missing.

  Does anyone know how can I fix?  A very simple language please!  See you soon.

  Download and run AutoRuns [1] and see if you find rundll32.exe entered and clear so the message.

  André

  [1] http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• RUNDLL error loading C:\Users\Gail\AppData\Local\Temp\fontftp.dll the specified module could not be found

  This message appeared on start up after I installed my new printer. How can I get rid of him? Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This is the probably the result of malware then do a very thorough check and when the
  the system is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error loading Windows 7 on Windows XP. Unattend.dll is not a valid image.

  Try to install Windows 7 on my Windows XP Home Edition and it comes up with this window... "The application or DLL i:\sources\UNATTEND. DLL is not a valid image. Please check this against your installation diskette. »

  This msg comes after clicking on my computer, then on the CD-Rom with windows 7. Then the window with the above message appears. After clicking on the "ok" button, a new window opens called Windows Installer and the msg said: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1].

  How should I proceed?

  Karen

  You can not install Windows 7 from while running XP. Boot from the DVD of Windows 7 and "Press any key" when prompted.  If you follow these instructions already your DVD can be zero, fingerprint or defective. Download and cremnant a new DVD according to the instructions below.

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Error loading C:\users\Brad\appdata\local\temp\cmmoiles.dll

  What is cmmoiles.dll

  I can't find anything about this file, see bing, google, drive c; nothing? I get this error:

  Hello

  Since its in a temporary area, you may have dodged a bullet. Better to delete the file, if it exists, then
  remove the error message.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The 459 ordinal could not be located in the dynamic and other link library urlmon.dll various problems

  So I got the above error message sometimes appears when you install a program by clicking Help in Codeblocks and sometimes irregular.

  I don't know if there is a model when it appears, but it's getting boring.
  When AVG is done scanning or updating, there's usually something slide up in the lower right part of the screen, but lately it shows only a white box. I guess it has something to do with the problem in urlmon.dll.
  In Skype, it keeps insisting that I don't have an active internet connection, so it won't let me import contacts or to see the home screen.
  When I went to the control panel to see if Internet Options had nothing to do with it, I couldn't open Internet Options. I would try to click on it, and it opens, even if I tried to get there by typing it in at the top, through network connections and other means.
  Spybot Search and Destroy can not scan at all, he just opened and then stops working.
  I have Windows 7 Enterprise (Korean).
  The trouble started during an update or another, but I can't remember which.
  It would be much appreciated if someone knew how to solve this problem, because I'm close to just reinstall Windows, which would be a great way to do.

  Hi JI Abe.

  As you have Windows 7 Enterprise edition installed, I suggest you post this question in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.