LaserJet 1600: problem with printing on color laserjet 1600
I just replaced all color cartridges, but the left side of the print is faded. I cleaned it up, and I don a supplies status page. black and cyan colors print correctly. yellow - the left third of the color bar is faded to white. Magenta hardly shows in color at all.
any suggestions? Thank you
Problem running on this series with the Magenta. Yellow it is possible also, but more than likey you have a bad toner. See instructions attached on how to fix. A lot of work but not so hard. Usually I leave the track of wire black plastic which crosses the upper part as it is a bear to get back up and is not necessary. A couple of tie wraps will do the trick.
Tags: HP Printers
Similar Questions
-
HP Deskjet 3050: Problems with printing in color?
Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing. I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!
Looks like you have a cartridge that is short of magenta or default. This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly. The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.
-
Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."
I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.
I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.
I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help
HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.
I consider that a resolution of the post!
-
I have a problem with printing on Windows Vista.
I have HP desktop with Microsoft Vista operating system. The printer I have is HP Laser Jet P1006. 1 months ago about the computer wouldn't print or download an attachment to an email. I uninstalled the printer and re-installed, but the problem persists.
What happened, it was this. With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up. Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line. When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.
Please explain what was wrong and how to fix these problems with printing and download of attached file.
Hello
Please contact the Microsoft Community.
Have you tried to print using a different printer?
I would have you try the steps of troubleshooting in these articles.
Note: I would first try to 'doctor HP Print '.
If this problem is limited to the HP printer, so I'd like you to contact the respective support]-
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684
We know if you need help.
-
Problem with printing in format Adobe acrobat, DC
Help
I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC
Since some day´s a can´t print my documents in Adobe DC.
What I did:
0 reinstall new driver for my printer
1. New Installation of Adobe Acrobat DC
2. Installation of the New Apple OS X el Capitan software.
3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.
4. all other software can use the printer on my system.
Important: before that I had problems with printing works I didn t have had problems.
What can I do?
Thank you
Neugebauer, Germany
Hi frankn30090339 ,
Sorry for the inconvenience.
You can download the latest patch that contains the resolution of this problem.
Please see this link: failed to print in Adobe Acrobat format
Let us know if you need additional assistance.
Concerning
Sarojini
-
Problem with printing pdf from Adobe Acrobat Pro
Hello
I have Adobe Acrobat Pro 9.4.3.
PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.
After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.
So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.
You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".
You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.
Discover the problem here: http://www.tidbits.com/article/12078
-
LaserJet MFP M277dw Pro: problem with printing issue
We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you
UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty
Thanks to those who have tried to help
-
LaserJet Pro M426fdw: Problems with printing of pdf documents
Whenever I try to print PDFs in duplex (although occasionally same problem print one page) the first page does not print and on the pages that follow, most of the lines are blackened the right edge in towards the middle of the page. I didn't notice the problem with documents in other formats, but I always have problems with pdf files, and I have no problem, print the pdf to my other printers.
Do other normal Duplexes of programs (word, etc.)?
If so, it sounds Adobe specific, otherwise I would reinstall the printer driver.
-
Problem with printer color ink large format 7500 has
Having a problem with the color cartage 920XL
I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red
installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.
Help, please
I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you
Thanks Mike
Hi SchneiMB,
Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.
-
Problem with the missing colors when printing
It was sugested by HP that I try this forum for help.
The following is a copy of the email that I sent them that describes my problem, I hopesomeone can help! Thank you.
language_code: en
language: English
Country of residence: France
Product_Line: 83
product_oid: 59868
product_name: HP Deskjet 840C Printer
PART_NUMBER: C6414K, C6414J, C6414A, C6414G, C6414N, C6414H
purchase of month: 8
purchase year: 1996
problem area: the color and print quality problems
Serial number: [text removed for privacy]
operating system: Microsoft Windows Vista Home Premium 32
How your product is connected to your PC? : USB cable
description of the problem: when I try to print a page containing the coloured elements, the elements of color can not print. (The items are completely absent, they are not replaced by gray-scale images) I did all the usual things, according to the list: -.Troubleshooting: 1) restarted my computer.
(2) disconnected the USB cable and reconnected.
(3) changed the color cartridge.
(4) examine the printer settings in the Control Panel, the color is selected and all other settings seem normal.
(5) cleared the printer as your 'default' and re-installed.
(6) run software that checks the driver is up to date and it is.
(7) printed the built in 'beautiful color made easy' test page only the header and footer to print, no color!
Exchange: no, nothing has been changed.PS. I have owned my printer for many years and don't remember the date of purchase.
technical skills: intermediate
First name: Grant
First name: W [text removed for privacy]Apart from the mentioned measures check the dates of warranty on the cartridges as shown here. If they are years of the warranty period, is it possible the cartridges have failed, even though they were new in the box. Also gently pat dry the printhead on a damp cloth to ensure that there are stripes of color cyan, magenta and yellow. If there is not a task of strong color on the fabric the cartridges are probably the cause.
The only black test page confirms that the issue is in the printer or cartridges, not with the computer or the drivers.
-
HP 6600 printer: I have a problem with printer Hp 6600
Even if I do not print colors, my motto keep depleting the color cartridges and will not work until all color cartridges are installed. What can I do if I want to use only the black cartridge?, it was so boring.
Hi @Stork11,
Welcome to the HP Forums!
I understand your frustration. However, this printer uses same color inks when printing in black only. If run out you of color and kept black printing only, you provoquerez problems with the print head. FYI, here's the guide to your printer , see page 74. I also linked page to provide information HERE.
Hope this information is useful and have a great day!
"Please click the Thumbs up icon below to thank me for having responded."
-
I am running Windows 7 64 bit. Never had a problem with the printer until today. I installed a new black cartridge HP 60. The alignment test failed during the sweep phase, error says I don't have a pattern of good alignment. I can print, but when I try to scan, the grip of the printer, I can't stop it by pressing the power button. Have completed the task by using the Task Manager. I tried to restart and unplug the printer. Should I try to reinstall the printer? I seem to remember that a new printer driver has been installed recently.
Thank you
Rege
The alignment page was only a black rectangle, no other color. After the reinstallation of the black cartridge, I restarted the alignment test, and it worked OK. The new alignment page had colors next to black. Not sure what happpened, but the printer works OK now.
Thank you
Rege
-
Problem with printer or ink system failure
I have a HP Officejet 6600, and I get this message:
"There is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »
Well, I did it. I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times. I always get the error message. I also took printhead of the printer and put back them in. Does anyone have a solution that might be able to share with me for this problem?
Thank you
Melinda
My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since
-
OfficeJet Pro 8500 has Premium - problem with printing PDF documents
My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!
Try the following setting and let me know any changes:
Adobe Reader, launch the dialogue of the printer.
Click on Advanced Options at the bottom of the dialog box.
Check the Print as Image checkmart.
Click OK to approve and try to print
-
HP AIO 1515: problem with printing photo 13 x 18
Hi I have a problem with the print photo (13 x 18) size she cut in the end of photo I use hp photo creations but if choose 100% size or fullscreen, same result please what can I do; I am disappoint bought this printer if photo print well
Please help me
Hi @nik1,
I see by your post that the printer cuts off the image when printing on paper 13 x 18. I want to help you.
According to the specifications of the printer, it does not support this paper size. You will need to use a supported paper size. The largest size is US legal 8.5 x 14 inches.
If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.
Maybe you are looking for
-
Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition
I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDUWho knows where to find the RAID driver to load when you start the installation of xp? This model no longer appears in the driver download section.
-
Re: Internal microphone Feedback makes it annoying when the loud noise from speakers
Hello I have an annoying problem when I turn the volume on my speakers, there is a strong sound feedback from the internal microphone, I do not know how to get rid of. When I turn my speakers down it goes, but what's the point of having great speaker
-
Satellite A500 - updates causing blue screens
Hi all An update happens, I get blue screen every time crashes, System Restore to a previous point, but then wants to redo the updates? I'm going along in circles No idea what to do? Thank you
-
HP laptop laptop 15-ac198TU: is my normal hard drive?
I just bought my laptop and heard this noise of crackling, as similar to the video of my hard drive. Is this normal? Or is my drive defective? https://www.YouTube.com/watch?v=hBcFLZ2S7Fk
-
Windows 10 will migrate all my pix from Photoshop Elements of Windows 7 Pro?