Error locking and sending

Similar Questions

• bug in the lock and send it to 11.1.1.3 Excel?

  Y at - it a bug in the lock and send it to 11.1.1.3 Excel?
  I have two lines in excel as shown:
  After I lock and send, both lines have 177.00. This occurs even if the two lines were separated by other lines of data.
  Thorough review of each Excel cell, I see two single quotes before 360 and 6020 2nd line. the first line 360 has single quote, but there are spaces between the single quote and 360. Here is roughly what I see (this site deleted my spaces, so you won't see space in 360 of the first line and its apostrophe):
  
  Jan
  
  ' 360 75 6022 2,424.00
  "360 19" 6022 177.00
  
  On further testing, I discovered that it was the LACK of apostrophe in CC "19" that caused the problem. It's weird that Essbase does not give an error message complaining that 'not all dimensions' as currently.

  If Essbase is a line in a lock and send that contains invalid members, it will load the last combination of valid membership (with no error, as you have noticed). For this reason, I always do a recovery on the dimension members that I want to load first, because she's going to tell me that the members are not valid. On a copy of the sheet of recovery (set to incorrect member), I'll type then the values I want and then lock and send. In this way, I'm guaranteed to send exactly what I want to send where I want to send it.

  Sabrina

• Cannot lock and send data to an Excel add-in planning application

  Hi all
  
  One of our customers uses Essbase 7.1 version and planning 4.0.1
  
  The question is when one of their user tries to lock and send data to an application of addin planning Excel Gets the following error:
  
  "You don't have sufficient access to perform a lock on this database"
  
  But he is able to lock and send through a form web planning without any problem.
  
  The user belongs to a group that was supplied with some filter access that the planning application and write permission is given for this filter. The filter has been created from the side planning and was rejected.
  
  Also in excel, under Essbase-> Options-> tab Mode, the "Update Mode" option is not checked.
  
  Can someone help me on this topic.
  
  Thank you
  Raja

  Hello

  What is a recent thing? I guess they use these versions for some time? If it's a recent thing then I would start by looking at what has recently changed on the server.

  One of our clients had a problem with a version a little older (3.3 planning and Essbase 6.5.4.2) where each user had 2 filters in Essbase. "User1" was the filter of planning and "User1_" was the Essbase filter for the same user. Whenever an update of the planning was made he re - create the Essbase filter such as users could not run calc scripts or perform locking and send in Excel.

  We had to use a script MaxL to replace the underscore (essbase) filter with the filter of planning and which meant that users can write to Essbase.

  I may be the line of underscores and no line underscore filter the worng way round, it was a long time ago!

  Hope this helps
  Stuart Game
  www.Analitica.co.uk

• Every day I get this error message and send it to Microsoft. 32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Every day I get this error message and send it to Microsoft.  32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Also: Microsoft called me about a report of my computer.  My daughter thought it was a hoax and hung up.  Is there a way I can connect with this Department once again?

  Microsoft does not automatically contact you if you send details of error for them.  They use these reports to see what types of questions are trending and those that are trending upwards looked at herself.  The rest cannot.

  And your daughter has been very wise - the call she received WAS a scam and she did well to cling to their topic.  Microsoft never call you unless you call them first, and they tell you that they will call back.

• Publish with essbase lock and send

  I am facing a strange problem with my lock essbase and send. For example if there are 2 lines in the worksheet we need loack and send data, if a member of the second row who is mentioned is incorrectly or not present in the outline, essbase replaces the invalid member with the Member of the same column in the previous row, and sends the data instead of reject the line It's the origin of the data issues. I want the second row is rejected by the lock and send, I use essbase excel addin. the version of the addin is 11.1.2.0 and execution of upload essbase server version 11.1.2.4.004. Could someone please help me solve this problem.

  Hello

  what you describe is a common feature. Unknown member (or comments) are ignored in SmartView, but when the application can be designed by taking the last known member of the dimension, the query (and lock operation and sending) are carried out.

  For example, there are 2 dimensions in rows, the period and the scenario.

  He comes to work and click OK:

  Real 11 Jan

  Budget of Jan 10

  Real 11 Jan

  Budget 10

  This will work, Budgets is misspelled, and when we let out, you see a bad request:

  Real 11 Jan

  Budgets of Jan 10

  Real 11 Jan

  Jan                     10

  This will work, Jans is spelled wrong, and when we let out, correct query will appear:

  Real 11 Jan

  Jans Budget 10

  Real 11 Jan

  Budget 10

  This will happen at your side. Smart View has (for me) not a real feasible option to come around that. It goes same for formulas - the result of these will be loaded with lock and send.

  Kind regards

  Philip Hulsebosch

• Lock and send questions

  Hello

  I have essbase 11.1.2.2 and I a BSO cube. I'm blocking and send to an intersection. After the lock and send it when I retrieve the data I can see the data. But after the execution of all CALC when I get back, I am unable to see the data.

  I send you data at level 2. I do it the correct way to load data because I am not up-to-date at the zero level.

  Can you please let me the possible reasons for this problem.

  Thank you for your help in advance.

  «.. . Since I'm not updating at the zero level. »

  I'm not clear from your question whether you are, indeed, loading data at the level zero in all dimensions.  If you are not, then your calc can be overwhelming number you sent by a simple consolidation.

  It is also possible that you are loading to a stored Member who has a formula to this topic, and when the CALC ALL running that the formula is running and crush your charge number.

  A third option is a formula on another Member to replace the value on a member that you load, but it is a less common situation.

• Lock and sending

  Hello
  
  If I use "lock and send ' method of loading for a particular combination of data, it is possible to add up the data entered for the second time, rather than writing data collected for the first time?
  
  Thank you.
  
  Published by: aek on November 5, 2012 02:13

  Hi AEK.

  No.... It is not possible to add with existing data.

  'Lock and send' can perform action to replace/update data using the Essbase Excel add-in.

  Thank you
  Good friend.

• write again (lock and sending) cubes (v11.1.1.3) Essbase ASO?

  Hi all
  
  can you please let me know if I can make a "lock and send ' in throug cube ASO Excel Add-in? I have Essabse version 11.1.1.3. If Yes, please let know if do any particular setting.
  
  See you soon!
  REDA

  Thanks John, can I know why we don't need to lock with the ASO database.

  ^ ^ ^ There is no blocks to lock. The blocks are at the heart of data block storage Option. Technology of comprehensive database storage Option is a different beast under the covers.

  Kind regards

  Cameron Lackpour

• Lock and send it via the snap-snap-in spreadsheet

  I have a question regarding blocking and sending via the snap-snap-spreadshet. When we realize this action, we understand that the existing data values are replaced. Is there a parameter indicating to add values to existing data when we carry out the lock and send?

  No, lock and send just a crash. you will need to create a custom code or something like Dodeca is used to

• Follow the lock and send data

  Hello
  
  Is it possible to track who has connected via the complement Excel Essbase and did some lock & send? Is any leak check in Essbase?
  
  Thank you.

  SabrinaD wrote:

  Take a look by using SSAUDIT - http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/ssaudit.html

  In the document, I noticed this:

  SSAUDIT is not available when you use Free-Form of notification in addition to spreadsheet.

  What exactly do mean by free form report?

  Sabrina

  I'm too lazy to type, to have a reading of "Free-Form Reporting" section in http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_client.pdf

  "Free form reports allows you to tell Essbase that you want to retrieve by typing Member nto the worksheet." Free form reports is especially useful when you are familiar with the members and dimensions to your database schema... »

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Submit Smart data view and Lock and send in Excel Addin

  Hi all
  
  I need to prevent users to send data to Smart view or Excel Addin.
  I can't as read access because I want to write of the Hyperion Planning Web Form.
  
  On the same any help will be appriciated highily.

  We want to display the data by using Smart view and macros, but do not want to change the data from there.

  ^ ^ ^ There is nothing to do. This is the mode of operation of the Planning. Users planning Essbase are read-only. Go check their filters and you will see what I mean.

  Kind regards

  Cameron Lackpour

• Intersection is grayed out on online form, but can lock and send in excel

  some cells are grey out in webform planning I don't know what is the reason. I can write to these intersection in smart view, but struggling to pinpoint the problem. I have write access. Even tried with access admin here is gray on the online form.
  All are zero-level
  No member of dynamic calc
  dimension Checked security
  
  
  can someone help me with this problem

  Understand Beg balance Scenario in the time limit for the Member of the dimension. :)

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin_11122/scen_add.html

  See you soon...

  Published by: Renu on May 30, 2013 21:11

• Error locking & send

  Hi when I usually use lock and send I have not recived any error up to dat, but today, I have some questions
  
  * [D:\Hyperion\...\ess0001.pag] file cannot be created because it already exists [adIndNewFile] abandoned... *.
  
  can help will be appricated

  There are a lot of questions that might come into conflict with:
  It would be better you post error error number information

  base would try you look combination that your load given by excellent and make sure that all of them are zero...
  Not the combination are miss placed
  If you have too many lines, it would be better u use rule file for loading data... that will help to overcome these problems

  because he got network problems... more to come this test
  In Essbase.cfg:
  Add/increase both parameters network as follows:
  netdelay 1500
  netretrycount 2000
  Do not increase by more than 10 minutes for above values

  It would be a single scope of workarounds... Similarly, there are several workarounds depends on error

  Hope this helps

• My icloud account is locked and I can't receive emails from release because they send the icloud, mail it is possible mail to release to be sent through the intermediary of my apple ID

  My icloud account is locked and I can't receive emails to unblock my icloud account because they send mail to icloud so that is locked, if possible mail to release to be sent through the intermediary of my apple ID so that I can be able to see.

  If you have only a @icloud e-mail address, you will need to call Apple Support and ask your password reset e-mail be sent to an alternate email address.

• Satellite A100: IE7 keeps stopping and sending error

  I recently downloaded IE 7 but since making IE keeps closing and to send error reports saying he met a problem and needs to close.

  Matter who has any apaart suggestions to uninstall IE7 which will be my next move!

  Hi Victor

  You didn t post error messages and so I put t think that everyone will have here to other ideas and suggestions as to reinstall internet explore.

  But one thing is very interesting is the problem also occurs with different internet browsers like Firefox for example? If not so for me he question s only an IE and the new facility should help you.