Follow the lock and send data

Similar Questions

• Cannot lock and send data to an Excel add-in planning application

  Hi all
  
  One of our customers uses Essbase 7.1 version and planning 4.0.1
  
  The question is when one of their user tries to lock and send data to an application of addin planning Excel Gets the following error:
  
  "You don't have sufficient access to perform a lock on this database"
  
  But he is able to lock and send through a form web planning without any problem.
  
  The user belongs to a group that was supplied with some filter access that the planning application and write permission is given for this filter. The filter has been created from the side planning and was rejected.
  
  Also in excel, under Essbase-> Options-> tab Mode, the "Update Mode" option is not checked.
  
  Can someone help me on this topic.
  
  Thank you
  Raja

  Hello

  What is a recent thing? I guess they use these versions for some time? If it's a recent thing then I would start by looking at what has recently changed on the server.

  One of our clients had a problem with a version a little older (3.3 planning and Essbase 6.5.4.2) where each user had 2 filters in Essbase. "User1" was the filter of planning and "User1_" was the Essbase filter for the same user. Whenever an update of the planning was made he re - create the Essbase filter such as users could not run calc scripts or perform locking and send in Excel.

  We had to use a script MaxL to replace the underscore (essbase) filter with the filter of planning and which meant that users can write to Essbase.

  I may be the line of underscores and no line underscore filter the worng way round, it was a long time ago!

  Hope this helps
  Stuart Game
  www.Analitica.co.uk

• bug in the lock and send it to 11.1.1.3 Excel?

  Y at - it a bug in the lock and send it to 11.1.1.3 Excel?
  I have two lines in excel as shown:
  After I lock and send, both lines have 177.00. This occurs even if the two lines were separated by other lines of data.
  Thorough review of each Excel cell, I see two single quotes before 360 and 6020 2nd line. the first line 360 has single quote, but there are spaces between the single quote and 360. Here is roughly what I see (this site deleted my spaces, so you won't see space in 360 of the first line and its apostrophe):
  
  Jan
  
  ' 360 75 6022 2,424.00
  "360 19" 6022 177.00
  
  On further testing, I discovered that it was the LACK of apostrophe in CC "19" that caused the problem. It's weird that Essbase does not give an error message complaining that 'not all dimensions' as currently.

  If Essbase is a line in a lock and send that contains invalid members, it will load the last combination of valid membership (with no error, as you have noticed). For this reason, I always do a recovery on the dimension members that I want to load first, because she's going to tell me that the members are not valid. On a copy of the sheet of recovery (set to incorrect member), I'll type then the values I want and then lock and send. In this way, I'm guaranteed to send exactly what I want to send where I want to send it.

  Sabrina

• Lock and send it via the snap-snap-in spreadsheet

  I have a question regarding blocking and sending via the snap-snap-spreadshet. When we realize this action, we understand that the existing data values are replaced. Is there a parameter indicating to add values to existing data when we carry out the lock and send?

  No, lock and send just a crash. you will need to create a custom code or something like Dodeca is used to

• Publish with essbase lock and send

  I am facing a strange problem with my lock essbase and send. For example if there are 2 lines in the worksheet we need loack and send data, if a member of the second row who is mentioned is incorrectly or not present in the outline, essbase replaces the invalid member with the Member of the same column in the previous row, and sends the data instead of reject the line It's the origin of the data issues. I want the second row is rejected by the lock and send, I use essbase excel addin. the version of the addin is 11.1.2.0 and execution of upload essbase server version 11.1.2.4.004. Could someone please help me solve this problem.

  Hello

  what you describe is a common feature. Unknown member (or comments) are ignored in SmartView, but when the application can be designed by taking the last known member of the dimension, the query (and lock operation and sending) are carried out.

  For example, there are 2 dimensions in rows, the period and the scenario.

  He comes to work and click OK:

  Real 11 Jan

  Budget of Jan 10

  Real 11 Jan

  Budget 10

  This will work, Budgets is misspelled, and when we let out, you see a bad request:

  Real 11 Jan

  Budgets of Jan 10

  Real 11 Jan

  Jan                     10

  This will work, Jans is spelled wrong, and when we let out, correct query will appear:

  Real 11 Jan

  Jans Budget 10

  Real 11 Jan

  Budget 10

  This will happen at your side. Smart View has (for me) not a real feasible option to come around that. It goes same for formulas - the result of these will be loaded with lock and send.

  Kind regards

  Philip Hulsebosch

• Error locking and sending

  Hello

  I have a BSO cube and I am blocking and send. After the lock and send it when I retrieve the data I can see the data. But after executing calc script when I get back, I am unable to see the data.

  The Member into account Dim that I'm loading data is member of L0 and a stored member and it didn't consolidate ownership (~). There not all formulas. Members also defined parents or not consolidating goods (~).

  Can you please let me the possible reasons for this problem. Should I change the data to dynamic Calc store? This is the calc script that I use.

  UPDATECALC OFF SET;

  FIX ("DTC")

  DIM CALC ('Accounts', 'area', 'Year', 'place', 'Vehicle');

  SET CLEARUPDATESTATUS AFTER;

  CALC TWOPASS;

  ENDFIX;

  Lock and send at the intersection:

  Area TTT vehicle 3Q 14 SYS1

  PROFIT_ACC1 11000

  where SYS1 is a member of dimension of 'place' and it is a shared member and PROFIT_ACC1 is a member of the dimension of 'accounts '. Also Q 3, 14 is a member of the year and it is shared member.

  Any help is appreciated.

  There is nothing in calc that would free the data; It is technically possible that another formula of Member's compensation, but unlikely.

  So with that said, a few questions:

  1. you send and retrieve with the same sheet, right?

  2. all members (not only PROFIT_ACC1) are stored members, zero level, correct?

  Replacing the dynamic member calc, he is unable to store sent data, which certainly won't help you.

• Lock and send questions

  Hello

  I have essbase 11.1.2.2 and I a BSO cube. I'm blocking and send to an intersection. After the lock and send it when I retrieve the data I can see the data. But after the execution of all CALC when I get back, I am unable to see the data.

  I send you data at level 2. I do it the correct way to load data because I am not up-to-date at the zero level.

  Can you please let me the possible reasons for this problem.

  Thank you for your help in advance.

  «.. . Since I'm not updating at the zero level. »

  I'm not clear from your question whether you are, indeed, loading data at the level zero in all dimensions.  If you are not, then your calc can be overwhelming number you sent by a simple consolidation.

  It is also possible that you are loading to a stored Member who has a formula to this topic, and when the CALC ALL running that the formula is running and crush your charge number.

  A third option is a formula on another Member to replace the value on a member that you load, but it is a less common situation.

• Using af:poll to refresh and send data in table page and bound to the data in ADF

  Hi all

  Today, I practiced component survey. I'm going with blog post.

  JDeveloper, Oracle ADF & amp; amp; Java: The use of af: poll to refresh and send data in the page and databound chart in ADF

  all feature fine work. but where I stuck in this stage

  • Start your application and make changes to database and see the new user interface in every 4 seconds.

  but reloaded data seems to be always 1.

  I make the changes 3 or four times in db.i may be able to see the changes. but data reloaded always showing me 1.

  public class Mbeans {
      private RichActiveOutputText activeoutputtext;
      private String refreshinfo;
      private int i = 0;
      private RichPanelCollection pcl;
  
  
      public Mbeans() {
      }
  
  
      public void setActiveoutputtext(RichActiveOutputText activeoutputtext) {
          this.activeoutputtext = activeoutputtext;
      }
  
  
      public RichActiveOutputText getActiveoutputtext() {
          return activeoutputtext;
      }
  
  
      public void polllistener(PollEvent pollEvent) {
          // Add event code here...
          BindingContext bindingContext = BindingContext.getCurrent();
          DCDataControl dc = bindingContext.findDataControl("AppModuleDataControl");
          AppModuleImpl am = (AppModuleImpl)dc.getDataProvider();  
          am.getEmployeesView1().executeQuery();
          i = i+1;
          refreshinfo =  "Data Reloaded-" + i+"  Total Row-->"+am.getEmployeesView1().getRowCount();
          AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
          adfFacesContext.addPartialTarget(pcl);
          adfFacesContext.addPartialTarget(activeoutputtext);
          
      }
  
  
      public void setRefreshinfo(String refreshinfo) {
          this.refreshinfo = refreshinfo;
      }
  
  
      public String getRefreshinfo() {
          return refreshinfo;
      }
  
  
      public void setPcl(RichPanelCollection pcl) {
          this.pcl = pcl;
      }
  
  
      public RichPanelCollection getPcl() {
          return pcl;
      }
  
  
      public void setI(int i) {
          this.i = i;
      }
  
  
      public int getI() {
          return i;
      }
  }
  

  Thank you

  HM, I do not have the sample

  What place is the bean in? It should be at least in viewScope...

  Timo

• Lock and sending

  Hello
  
  If I use "lock and send ' method of loading for a particular combination of data, it is possible to add up the data entered for the second time, rather than writing data collected for the first time?
  
  Thank you.
  
  Published by: aek on November 5, 2012 02:13

  Hi AEK.

  No.... It is not possible to add with existing data.

  'Lock and send' can perform action to replace/update data using the Essbase Excel add-in.

  Thank you
  Good friend.

• write again (lock and sending) cubes (v11.1.1.3) Essbase ASO?

  Hi all
  
  can you please let me know if I can make a "lock and send ' in throug cube ASO Excel Add-in? I have Essabse version 11.1.1.3. If Yes, please let know if do any particular setting.
  
  See you soon!
  REDA

  Thanks John, can I know why we don't need to lock with the ASO database.

  ^ ^ ^ There is no blocks to lock. The blocks are at the heart of data block storage Option. Technology of comprehensive database storage Option is a different beast under the covers.

  Kind regards

  Cameron Lackpour

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• Activate both drag the lock and drag three fingers

  I tried to activate the TWO drag the lock AND three sliding your finger on my new MacBook Air shape some time and have not been able to do.

  I have an older MacBook Air and an older iMac and on these two computers, it works (it didn't come pre-loaded with El Capitan, they have been 'improved' to El Capitan).  On both I can drag a window using both drag lock AND drag three fingers.  However, I am unable to do it on this new computer.   Is the any way to implement?

  Any ideas?

  Hi Joel,

  Options to drag in El Capitan are discussed in this resource:

  OS X El Capitan: mouse & Trackpad pane accessibility preferences
  https://support.Apple.com/kb/PH21509?viewlocale=en_US&locale=en_US

  The trackpad options

  Allow drag

  Check the box to be able to drag items.

  To set sliding options, click on the context menu, and then choose an option:

  without slide-Lock: double-tap an item, and drag it without lifting the finger after the second tap. dragging stops immediately when you remove your finger.

  Drag lock: double-tap an item, and drag it without lifting the finger after the second tap. dragging continues when you remove your finger and stops only when you type once the trackpad.

  three fingers slide: move an element with three fingers. dragging stops immediately when you lift your fingers.

  Take care

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  Hello team,

  First and After Effects crashed.

  I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

  I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

  I deleted everything I found CC remaining manually.

  I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  I don't know what to do anymore.

  Could someone help me?

  Virginia

  I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

• I made a form for my clients, I did this form with a button "submit" button, the button will save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is complete

  I made a form for my clients, I did this form with a button "submit" button, the button Save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is supplemented by my clients it send to my email address not the URL how to change this.

  No matter how you have configured the Send button when you use the feature distribute the form. There are some e-mail address is in your identity preferences (Edit > preferences > identity) and use it. If you can change the email address it or not to use distribute the form and the button send the value you want.

  One thing that happens when you use the feature to distribute the form is the form is enabled Reader, you can do separately, but you really shouldn't do if the form must be used by others. The dispenser a form must activate using their copy under license of Acrobat Reader.