Error Message C0000005

Similar Questions

• error message: __BCCode:1000008e BCP1:C0000005 BCP2:BF2CF595 BCP3:A8B64BA4 BCP4:0000000 OSVER:5_1_2600 SP:3_0 PRODUCTS 768_1

  my computer restarts just without reason. It has this error message.

  BCCode:1000008e BCP1:C0000005 BCP2:BF2CF595 BCP3:A8B64BA4 BCP4:0000000 OSVER:5_1_2600 SP:3_0 PRODUCTS 768_1

  This happens about 4 times this week.

  Hi Ebrahim kara,

  1. you remember to make changes to the computer before this problem?

  2. don't you seeany model particular to error?

  Method 1:

  You can try to update the graphics card and check if it helps:

  a. Click Start, click Run and then type devmgmt.msc.

  b. double-click the type of device (graphics card) you want to update or change.

  c. right click on the device driver specific, you want to update or change.

  d. click on update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  Check out the link:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 3:

  You can also view the details of the event log.

  For more information, see the article:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While playing axis & allies game I get this error message "thread PRINCIPAL caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94".

  I have an old axis & game cd-rom of the allies that gives me a fit. I get an error message and instructions on what to do, but there is no what to do. So, here is what the error looks like with bells and whistles of boxes/windows.

  Fatal error of initialization:

  thread HAND caught unhandled exception: Access Violation (C0000005) trapped in 1 B: B3FF94

  Then, he wants me to send log files that do not exist to "Atari." Heres so I know... This error is an access violation, which means that a certain part of the space no longer exists on my computor. Is there any help?

  Running win 7. must use compatibility to run cd rom.

  It allows to run fine with no probs.

  Thanks in advance for any advice.

  Original title: can not play my game development boo hoo...

  HI U.C.Newman,

  Thanks for the reply.

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• Satellite A305 - error message keep appearing from

  Hello, I have a Satellite A305-S6857 laptop
  A few days ago to XP downgrade Vista. It worked well but suddenly yesterday when I restart windows,.

  * the system has recovered from a mistake of the serosa

  A log of this error has been created

  For more information about this error, click here * so I clicked and it said

  error signature
  BCCode: 1000007e BCP1: C0000005 BCP2: BA430F76 BCP3: BA513C94
  BCP4: BA513990 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  So I simply ignored, did cancel but it keep poping up and I made reports but it did not work either.
  So I restart again but still the same. Every time I have restart this pop-up.

  So I googled on this topic and I've done something and I think after I did uninstall and reinstall a driver GMA an another error message too. It says * the Publisher could not be verified. are you sure you want to run this software? * and I say yes, he shows me another one same thing 3times.

  It's really annoying and after that I got a few messages pop up, my computer has become slow and sometimes it stopped

  help me guys...

  > He says that the Publisher could not be verified. are you sure you want to run this software?
  Maybe something wrong with the graphics card driver or other software which is not certified by Microsoft

  Did you use some third-party software, tools and 3rd applications?
  Have you installed the drivers from Toshiba or other websites of third 3rd page?

  Check the msconfig-> Start up tab and take a look at the list of background processes.
  If there are some applications that are not known to you, then turn it off.

  In the worst cases, you need to reinstall the OS.

• Error message from Windows Server 2012

  Hello

  We have an application that runs on multiple virtual machines of Windows Server 2012. The same version of the application runs correctly on all machines except one. On the race we get repeated .NET runtime, error messages in the Windows Event Viewer.

  Application: Vsop.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception info: exception code c0000005, exception address 6C3A23B7
  Battery:

  I checked the windows crash dump and you can observe the message.

  "the thread attempted to read or write to a virtual address to which he has no access.

  I couldn't find a reason for this behavior on a specific system. Can anyone provide some tips on why or how to fix?

  Thank you!!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

  MMC.exe APPCRASH

  When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

  Problem event name: APPCRASH

  Application name: mmc.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918d 09

  Fault Module name: KseAdm.dll

  Fault Module Version: 6.0.1262.1064

  Timestamp of Module error: 49426cbb

  Exception code: c0000005

  Exception offset: 0004 849 d

  OS version: 6.0.6001.2.1.0.272.7

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Blue screen stop error message. __

  I'm in serious trouble. I use Windows XP service pack 3.

  I reloaded the OS after formatting the hard drive. all measures have been taken as advised. I was not able to detect the device that is causing a FALSE START of the windows and then blocking the operating system while I do a lot of work.

  The following error report is generated any time well.

  BCCode: 1000008e BCP1: C0000005 BCP2: 00000004 BCP3: A699DC68
  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\Mini020311-01.dmp
  C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\sysdata. XML

  Hi pays.

  You may receive this error message when Windows tries to use incompatible device with Windows XP drivers.

  Follow the steps listed in the article mentioned below to solve the problem:

  Error message: the system has recovered from a serious problem

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Blue screen and CORE-DATA-INPAGE-ERROR Message

  The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

  Indeed, I am here!

  Thank you for fixing links.

  The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

  0: kd > 9eaa4efc ln
  (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

  The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

  0: kd > k
  ChildEBP RetAddr
  e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
  e551ba70 8409584 has nt! KiDispatchException + 0x1a9
  e551bad8 840957fe nt! CommonDispatchException + 0x4a
  e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
  e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
  e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
  e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
  e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
  e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
  e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
  e551bcdc 8423f47f nt! PspExitThread + 0x4a0
  e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
  e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
  e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  04adf6dc 0x77a95d14 00000000

  Associated police crashes, likely a buffer overrun.

  ---------------------------------------------

  1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

  * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

  2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

  Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

  avast! removal - http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Smart Defrag as soon as possible.

  4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

  Kind regards

  Patrick

• Whenever I log in I get an error message "Windows Update has stopped working".

  original title: everytime I log in I get an error message "Windows Update has stopped working".  I tried a manual update as well and it does not work.

  In details, the error message is:

  Signature of the problem:

  Problem event name: BEX

  Application name: wuauclt.exe

  Application version: 7.4.7600.226

  Application timestamp: 4a7b870b

  Fault Module name: StackHash_6bc7

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 00404968

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: 6bc7

  More information 2: f3f6a1403802118ada460cd45530935b

  Information additional 3:6477

  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  HiTunnywig,

   

  (1) since when are you facing this problem?

  (2) are - what you remember for change?

   

  Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Error message "Windows Explorer has stopped working"

  I have windows vista home edition, I get the error message "Windows Explorer has stopped working"

  I have two options, either to find a solution online and restart the program or restart the program. in all cases I restart Explorer and again get the error message, and then restart, etc...

  The following are the details of the problem. I tried to remove all CMD services and reboot, but it did not help

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Fault Module name: 2287.tmp

  Fault Module Version: 4.80.0.0

  Timestamp of Module error: 4c8c71fb

  Exception code: c0000005

  Exception offset: 000a7d70

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.0.6002.18005

  Fault Module name: 2287.tmp

  Fault Module Version: 4.80.0.0

  Hello

  Start Search ShellExView [1] for the 2287.tmp file and disable the entry.

  André

  [1] http://www.nirsoft.net/utils/shexview.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  ' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  
  

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.0.0.88

  Application timestamp: 55681d 39

  The default module name: StackHash_76b2

  The default module version: 0.0.0.0

  The default module timestamp: 00000000

  Exception code: c0000005

  Exception offset: 0000000000000006

  The system version: 6.1.7601.2.1.0.768.3

  Locale identifier: 3084

  Information extra No. 1: 76 b 2

  Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1

  Information extra No. 3: 51ff

  Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34

  
  

  Hi Oscar,.

  Please see the thread below:

  Photoshop CC 2015 crashing?

  You can also check: 2015 release of Photoshop CC: FAQ

  Kind regards

  Sheena

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• When I press the button Add card on my phone app here is I get the error message

  Hi thanks, my cards have been on my iPhone 6plus for quite awhile. I recently bought an iwatch series 1. Watch and phone software is up to date. My app to watch on my phone recognizes my cards when I press the map button Add on my phone app here is I get the error message.

  Hello

  To be able to add cards to pay Apple on your watch, it will first the configuration of the area selected (like on your iPhone):

  • On your iPhone, in the application of the watch, go to: Watch My > general > language and region - check Format correct region is selected.
  • If they are already correct, it can help to select again the two the same Format of the region and also the language of the system itself.

  Then follow the instructions here to add cards to the Watch:

  • Set up Apple pay on your iPhone, iPad, Apple Watch or Mac - Apple Support

  More information:

  Pay help, add maps of Apple - Apple Support

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!