Error message HP Solutions Center

Similar Questions

• "Tuner is not available" error message Windows Media Center with HD HomeRun Prime

  Running the tuner HD HomeRun Prime with Time-Warner tuning adapter.  Scan is not the tuner.  No problem with Device Manager.  For all drivers are current.  I have that once had access.  Then and only then, I had to access via HD HomeRun Prime and NOT of WMC.  No matter what I do, no tuners are found.  Adequate signal IS present.

  
  3. the similar issue was also addressed in the two threads below.
  http://thegreenbutton.com/forums/p/72329/376631.aspx
  http://thegreenbutton.com/forums/p/78588/388896.aspx
   
   
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step,Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties.
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

• Continuous error message: Dell Support Center has stopped working

  I have Windows V8ista on an Inspiron530s. With any surgery, I keep getting the following massage:

  "Dell Support Center Has Stopped Working                                                                                                                                                  Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " For several weeks, I tried to find out the reason for the error message. It will appear in a small box several times per hour during any operation. (internet or a document) I find no answers in any forum. I have a printer All in one HP that I uninstalled & reinstalled the software, for, at the suggestion of another, but that has not solved the problem.

  AT the SAME TIME: I have Trend Micro Internet Security, (aka PC-Cillion) and although the firewall & defenses are up, I can't scan the computer for viruses. I spoke with trend micro Tech Support 4 times on the phone and various changes have been made, but not thhas solution. They seem to think that the problem is related to this error message.  I'm really tired. Can anyone help?  :?/

  Best advice would be to uninstall the DSS. As you find that it causes more problems then it helps.  Go to the Control Panel programs and features and are looking for Dell support Center and uninstall it.

• Error message "Windows Media Center has stopped working" what Xbox Live is connected.

  Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

  I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

  Hey, Cliff,

  1. what operating system is installed on your computer?

  2. Windows Media Center works great if you do not connect Xbox Live?

  Follow the step in the article below and check if it helps.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

  http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Receive error message: "Dell support center has stopped working".

  original title: dellsupport center has stopped working. I do not have anything to do with again, todo with DELL SUP [PORT CENTRE.if it does not stop I take legal action]

  If she does not stop im, legal action, it's harassment. I don't want anything to do with DELL SUPPORT CENTER

  Hello

  1. when exactly you receive the error message?

  2. What is the brand of computer?

  3 did you changes to the computer before the show?

  Method 1: Follow the steps in the following link and check if that helps.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

  Method 2: If the problem persists then, ffollow these steps and check if you receive the same error message.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

• error message windows Security Center cannot be started

  A "Windows security alerts" icon (red shield with an X) makes its appearance on the right side of my taskbar. When I right click on it, I'm promped to click on, "Open Security Center. I then follow the instructions to locate the Security Center, but he done apper in the services window.  Help, please

  Check if this may help:

  http://support.Microsoft.com/kb/2519899?WA=wsignin1.0

• CSSN's erroneous error messages (Network Switch Center management system)

  I receive emai lalerts of the CSSN on switches are declining because of "factors: no response to SNMP GET."

  I think that this could be due to a heavy load on the switch at the time.

  Is there a way to increase the SNMP Get time-out in CSSN?

  Survey SNMP timeout settings are managed by 'Health Check properties' under 'Options' in the Manager of monitor. It provides allows you to change the value of default 5 seconds timeout to anywhere up to 60 seconds. Please note that it is the global setting and effect of all the devices listed in the Manager of monitor. Thanks Mushi

• OfficeJet 4500 G510n Solution: Officejet 4500 G510n Solution Center error

  Solution Center has scan well under Windows 7 home.

  After the upgrade to Windows 10 error message "HP solution Center cannot run because your installation of the device is not complete."

  went to HP Support installed new software page but keep the same condition.

  Hello!
  Welcome to the HP community @Josepr,

  I read about the problems of scanning you have faced after the upgrade to Windows 10 and I wanted to answer to help with my own suggestions.

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

   

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.
  

  Good luck, I hope this information helps

• HP Solution Center... hpqdirec.exe

  I have a HP Officejet 6500 (one year) running on Windows 7.  Today, I got an error message saying: HP Solution Center will not work because I don't have the correct version of Adobe Flash installed.  This message referred me to the Adobe site to download the latest version.  When I did, I always get the error message and Solution Center does not open.  Messages to lead me to the message "hpqdirec.exe", saying: it is not installed.  What is going on?

  Additional note: it is the application of hpqdirec.exe which lacks a component of windows.  Error message does not specify which component.

  Hey TZap. You're going to need "cleaner" software to delete everything. After you run the cleaner, you will need to reinstall the software. Here are the steps to run the scrubber:

  Option 1: From Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-2&cc=us&DLC=en&LC=en&OS=4062&product=3795314&sw_lang=
  10. run the download to reinstall the printer
  
  Option 2: If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-2&cc=us&DLC=en&LC=en&OS=4062&product=3795314&sw_lang=
  10. run the download to reinstall the printer

  Let me know if this is not the problem.

  Thank you

  Sean

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• Error message - Media Center had to close after you install the updates in the Windows XP computer.

  Original title: Media Center error and close message.

  I received a windows update last night and when I restarted my computer I got an error message that Media Center had to close. I sent error report, but the error message comes back upward. How fix the error or at least get rid of the error message?

  Hi PaulArnesen,

  Update that you installed before the problem?

  (a) that you try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) later, you can manually download the update from the Microsoft Download Center and install it.

  Hope the helps of information.

  Please post back and we do know.

• OfficeJet pro l7580 impossible to reinstall hp Solution Center

  I have a Win 7 Home Premium w/SP1, updates current MS at 27/05/2014

  Wireless connect to Officejet Pro L7580.  We have Verizon FIOS & wireless phones.

  The L7580 is connected by Ethernet to a 2nd PC w / Win 7 Home Premium w/SP1 & common enough MS updates.

  I have been using the above configuration for 2 years with the center of HP solutions for scanning, printing from a PC without any problems.

  Then, I improved the Verizon router to have the WPA2 security on 02/06/14.  I am able to print as I did before, but HP Solution center gave me an error msg:

  Solution Center cannot run because the installation is not complete.   I would like to be able to view a jpg.

  1. based on some advice forums, I reinstalled the using L7580 full download, restarted - received the same error msg when opening HP Solution Center.

  2. I uninstalled the HP Solution Center, rebooted.  Installed the packge L7580 full, rebooted.  HP Solution Center has not been installed. Can print as I have before.

  I need help,

  Thank you very much

  Ken

  Thank you for responding.  I decided that I would replace the L7580.

• HP Photosmart Premium C309g-m: HP Solution Center

  I have had this printer for some time, but in the last 6 months or so when I try to open the HP Solution Center, I get a window with the following message: "HP Solution Center cannot be run because your installation of the device is not complete.  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.  If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the start menu. "This message and Solution Center is inaccessible without apparent reason.  I not unhooked and reinstalled the full set of software from the original CD, and it seems to work very well until what it is not.  I'm running on a Dell with Windows 7 Home Premium laptop.  Is there a patch I need to install or an updated version of the software available for download and installation?

  Installation was completed according to the instructions.  I'll see if this corrects the problem, but it may take a while for the problem with the solution to appear again HP Center.

• HP Solution Center cannot run

  I'm used to be able to scan by going to the HP Solution Center on my laptop computer and direct the printer to scan.  All of a sudden I get a message "HP Solution Center cannot work because your device installation is not complete," How can I get this fixed?

  Hey, no problem that's why I'm here.

  Steps to follow:

  1. go to the start menu

  2. Select all programs

  3. find the HP folder

  4. choose HP photo file in the folder "HP".

  5. then select uninstall

  6. go through the process of uninstalling the software

  7. it should ask you to reboot the laptop

  8. after starting the laptop back up go to thislink.

  9 install the drivers on this page. You must click Download and save the installation on your desktop.

  10. once the download is completed you can access it from your desktop. Double-click the icon.

  11. the installation should appear and proceed with the download.

  If you have any questions during the download, let me know.

  THX

• Error message when you access files on NMH300 Explorer

  Hi, I have a problem here. The error message: "the media center doesn't answer, please confirm the device is turned on and connected to your network." appears whenever I try to access the file on the hub of media NMH300 browser. I tried to restart the unit, back to zero, but in vain. I always get the error message. I use the updated firmware 3.18.4. No idea how to solve this problem?

  Also, I can't seem to restore the firmware to version 2.17 even if I did a reset of the device by pressing the reset on the back of the unit. any help on this?

  Hello

  Try to press on and press and hold the reset button on the back of the mediahub for 30 seconds then check if its now reset to the factory settings.

  I'm curious, when you started having this problem it was in time when you created a folder under "File Browser"? Maybe the Linksys article below is the right way to create folders on the mediahub or just create a folder using the drive mapped.

  Create and delete new actions displayed in the file browser

  Anyway I hope this helps.