Error message of recovery license

Similar Questions

• I just went to run photoshop and I got an error message that my license has expired.  I bought this program (although there is a long time), is supposed to expire?

  I just went to run photoshop and I got an error message that my license has expired.  I bought this program (although there is a long time), but is supposed to expire?

  Hi sharonp3923897,

  The license does not expire. You may be able to correct the problem by following the troubleshooting steps in the following document: error "licensing for this product has expired". CS4, CS5.

  If you continue to receive an error message, please post a response to this discussion. Let us know your operating system and the version of Photoshop you use so that we can better help you.

  Best,

  Del

• Error message of recovery even after uninstalling printing 20 of Broderbund

  Original title - Windows Vista/Broderbund incompatibility problem

  I did a thing bab! I downloaded and installed printing 20 of Broderbund to my Toshiba Satellite A355-S6879 laptop which has windows vista.  I uninstalled it, but there's a problem.  When I close the lid and open it back up, it is re - begins with a recovery error message, or I have to turn off and turn on again with a message of error recovery.  All the world out there doing something this stupid and was able to solve the problem?  Help!

  Hello IworkForTheCat,

  I would go into the registry and see if you can find any mention of Broderbund the print shop 20.
  Note: the REGISTRY settings change incorrectly can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Go to start. In the start search box, type Regedit.
  Then, in the Menu bar, go to Edition and select search. In the find what box, type the string value you want to search.

  Please make a backup before you make any changes in Regedit. If you are not comfortable making changes, then please take it to a qualified person who can help you with your problem.
  You may need to contact Broderbund to determine if they have a removal tool or they can tell you where to find entries in the registry.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error messages Vista recovery manager

  When you try to create error and I get message "not a blank disc in the drive recovery discs."  Tried with out-of-box cd and dvd.  Same result.

  Hi Whalenbajan,

  If you know someone who has Vista, you can use the disc here. It is all the same and through your product number.

  Thank you.

• Re: Error Message with Recovery DVD creator

  A few days ago, I bought a new laptop Toshiba L650 12Z. I wanted to make the recovery dvd.

  I throw the creator of DVD recovery and after awhile, it gives the error "the file cannot be read. (E:/sources / boot.wim Error Code: 020150-20-00000000) ' and the process will stop. I tried several times, with the necessary waste of DVD.

  No one knows what to do in this situation.

  Thank you

  I recommend you try a media of high quality like Verbatim or Tdk dvd. You see, creator DVD doesn't accept poor quality, media

• How to solve the error message reported applicable license failed

  How can I correct a failure of applicable license

  Hello

  your question has already been answered

  Click on the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-code-says-software-lisensing-service/f198f8c0-7c7a-4BDB-883f-d689b131b58c

• 255:255 Lightroom 6.5.1 error message

  Hello

  After the reinstallation of Lightroom 6 on my second computer, I get an error message that the license limit is reached. I uninstalled the application without logging out of it. So now on my main machine, I am trying to sign of Lightroom and I get an error message disconnect 255:255 (see the screenshot). I wish I could reinstall the app on both my machine without having these error messages.

  Thanks in advance,

  Sebastian

  

  Hi Sebastian

  Please uninstall Lightroom from your computer and install it on the new computer.

  Let me know if there is a question Lightroom activation on other machines.

  Check the activation state, so it should be good.

  Kind regards

  Assani

• PhotoShop error message

  I have Photoshop CS4 on a Windows 8 I've had since March. Until I was on the phone with Sony Technical Support, the other day, PS and all my other Adobe products worked well. However, once Tech Support installed some updates on my computer, I now see 148: 3 Error Message When I run the PhotoShop application and software won't work at all!

  I had this software for 2010 when I bought it new with a suite. It is installed on a computer and the error message indicates the "license has stopped working".

  http://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Re: RECOVERY MEDIA - gives Error Messages 10-FC12-0241 & F3-F200-0002

  TOSHIBA RECOVERY MEDIA DISK to adapt the system to factory State. The recovery media copied the files and in the end gave me this error. * 10-FC12-0241 * and ask me to click OK to exit. After I clicked on OK, the system rebooted and gave me the following error message * F3-F200-0002. *.
  When checked with the technical support, I was told it could be the hard drive problem. So I bought a new hard drive,
  * Seagate Momentus ST9750420AS 750 GB 7200 RPM 16 MB Cache 2.5 "SATA 3.0 Gb/s internal notebook Hard Drive *.
  and I tried the same process.
  Each time, he gave the same error messages.

  Any solution please.

  Kind regards
  Suresh Kumar

  Hello

  Eventually the recovery disk is damage or defective.
  Seems you must new disc order from here: https://backupmedia.toshiba.eu/landing.aspx

  Good luck

• Error message appears after using the recovery CD

  Hello

  I use recovery DVD-ROM. Her work very well but after restarting the laptop, it gives me error, missing some files.
  I try to fix that but still error.

  What can I do?
  If I sent him to the workshop, that it would take 7 days to 2 months. :(
  Last time I have send it take 2 months and had to fix the screen when he in black and not work.

  So please help me here and don t send me for them.
  don't send me to them.

  Hmm. Maybe you n t need to contact the ASP.
  But how someone should help you without any details on the laptop model and the error message?  :|

  Could you post more information?

• Satellite 1900 shows a recovery on error message after reboot after

  My laptop Satellite 1900 305 after recovery uility, when commissioning for the first time shows an error message that indicates that the system has recovered from a serious error of a device. Can someone help me with this?

  Hello

  Well, it would be nice to have more information about your system. What operating system are you running currently installed Bios?

  This message appears again after a reboot?

  Good bye

• Satellite A135-S4666 - recovery disk displays an error message

  The hard drive crashed while I replaced it. I am trying to use the recovery disk to take the computer to the "out of the box configuration.

  I chose to 'recover' rather than erase the hard drive based on this choice. Then it copies the files from the first disc and pushes me to the second. After putting the other continues to copy files. Finally, she moves more to 'recover now' she does and seems to be using the hard disk newly installed something between 35 and 50% of the task. At this point, I get an error message stating "error recovery" and invites me to press ok to shut down the computer and spits out the CD. The error message is coded 10-FC12-0002. I tried 4 or 5 times with the same result.

  Am I supposed to use disc erase first, and then use the recovery mode since it is a new hard drive? Or I have a defective recovery disc?

  Any comments or ideas would be greatly appreciated, I do not get the case at this stage.

  Hello

  It's not easy to tell if it s a recovery disk problem or if the new HARD drive is the problem. Have you tested a Microsoft disc for example? If the disc of Microsoft is, it seems that your recovery disc is noisy and needs to be replaced. Otherwise the new drive HARD cause this problem.

  Check this box to determine the cause of this problem!

  Good bye

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• Error message in the recovery

  HP Pavilion dv6, product id a5g28av, qfpk1f60xw03

  I need to restore from cd with disc drive... going through windows reformatting the hard drive partition, allows you to copy the files needed to restore the hard drive and then I get an error message box

  "copy the files fails. "of E:/sources/boot.wim to: D:/sources/boot.wim press ok to try again.

  I press Retry and just get the same message again and again.

  My nephew fell off my computer that's why I had to boot from cd drive because when you try to start normally it would not.

  I get error code Oxc000000f "boot selection failed because a required device is inaccessible. Now what should I do?

  Yes. Just be sure to ge a capacity at least equal (or more) that the original in order to use Recovery Discs.Any mobile retail SATA hard drive can be used.