Error message on closing

Similar Questions

• Error message when closing Outlook Express 6.0

  Hello

  Sometimes I get an error message when I close off Outlook Express version 6.0. It asks if I want to debug the program and also asks me if I want to send an error report to Microsoft. There is also a link to click if I want to see the details of the error.

  Can anyone suggest what I need to do to stop these maessages as they qre quite annoying.

  Thank you

  Gerry

  If this happens a lot, then go to file | Identities and setup a new identity.  This will give a new registry hive and OE message store and should minimize these errors.  You can then use file | Import to get the messages from the old identity.

  OE has bugs that will never be solved.  Some of these bugs invoke mistakes you see.  So, it is endemic to the OE and you can't get rid of it, but you can minimize it by creating a new identity.  Also to compact your folders often (after saving) and keep records under a few hundred megabytes and will allow to reduce errors.

  Steve

• ERROR MESSAGE WHEN CLOSING DOWN THE COMPUTER

  On locking computer get the message: "the 0X012e8 statement referenced to fffffff is not found,"

  Something that you have running in the background is a failure. You must make systematic troubleshooting to find out what it is.

  The first step is always to ensure that your computer is free of viruses/malware.
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the machine is clean, you can manage your Startup to see what works with Windows:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  You can also look at what is running in the Task Manager just before you stop. Process Monitor (also from the Sysinternals link above) is another great free tool for troubleshooting things that are currently running. MS - MVP - Elephant Boy computers - don't panic!

• CD/dvd burner writes correctly, but displays the error message ' medium not present-tray closed. - 0X023A01'.

  Hello

  I have a unique problem where my cd/dvd burner burn my data to a recordable cd (not verified with recordable dvd yet) correctly, but after the burning process I get an error message "(devMediumNotPresent_TrayClosed) closing session error (Session: 4 medium not present-tray closed. - 0X023A01'.)"

  I tried roxio and nero, cdburnerxp, but I get this error on the whole. However, the burn is successful. I can open the data burned in my laptop or other computers and use the same drive to burn more data in the other computer. I tired to reduce speed, but it is of no use. I have also reinstalled the drivers but no use at the end I also did a clean uninstall of Roxio-> then installed Nero-> Nero clean uninstall-> then install Cdburnerxp 4.3.2.2140.

  Use the same media brand in my desktop LG cd/dvd combo drive, and things are absolutely perfect.

  Fix Microsoft, it gives the following report: -.

  -------------------------------------------------------

  Problems found status

  Drive is not capable of burning (TSSTcorp DVD +-RW TS - L632H) detected other Solutions
  -----------------------
  Issues checked the status

  Device is not working properly (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Class filter drivers are corrupt checked other Solutions

  Drive is not assigned one drive letter other verified Solutions

  Drive is disabled (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  ------------------------------------

  Other details: -.

  Dell Inspiron 1520 laptop | XP Pro | TSSTcorp DVD +-RW TS-L632H | CDBurnerXP 4.3.2.2140

  Please let me know if all of the other details are required. Waiting for a response

  Concerning

  TKS

  Hello

  I got my ODD back to normal. The simple solution was to clean the lens of the drive. I called a Dell technician. He inspected the car and found that the problem was due to an unclean lens. In fact, I have never cleaned the lens since I bought the laptop in February 2008. I used a lens cleaner with 6 brushes Writex.

  I also checked the drive by
  1. create a Live CD: Ubuntu
  2. a burned DVD
  3 burn a different brand CD

  Above all 3 tasks are normally carried out with any error. The player read / written correctly.

  Good bye.

• Whenever I tried to enter in gmail it closed showing an error message

  Whenever I tried to enter in gmail it closed showing an error message

  Operating system

  Windows XP Service Pack 2

  Yes, it's probably a few add-on you have in your Firefox. Start Firefox in safe mode to temporarily disable all add-ons (extensions, themes and plugins) and see if the problem persists.

• I got this error message "winrscmde has stopped working and was closed".

  ERROR WINRSCMDE

  I got this error message "winrscmde has stopped working and was closed".

  Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options...

  Thank you

  Bruce

  Hi Bruce,.
  Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• How can I display an error message on the listening port close popup without closing the popup.

  Hi Experts,

  JDeveloper 12.1.3.0.0

  How can I display an error message on the listening port close popup without closing the popup.

  Thank you

  Roy

  As its name suggests, close listener of popup is called when popup is closed so you can not do this.

  If you want to display the popup message, use your own buttons instead of the ok/cancel default buttons and close the popup programmatically.

  Dario

• Why do I get windows error message direct Library closed unexpectedly when I close the program?

  When I use windows live photo gallery to display an image and then close the program I get Windows Live messages Library closed unexpectedly.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Error message at the closing

  Hello Lenovo Community Support Team,

  I have a R61i under XP.

  Whenever I have stop the computer, an error message is displayed as follows: "end program - AwaySch.  Is it possible to eliminate this chronic error message?

  Thank you!

  Go here there is a download free http://www.piriform.com/

• Error message: unable to load your Firefox profile. It may be missing or inaccessible

  I know that others have had this problem but none of the validated answers turned out to be viable. When I try to start Firefox, the browser does not open and I see the following message appears: "unable to load your Firefox profile. It may be missing or inaccessible. "I am running Windows 8.1.

  It's what happened leading up to this problem. I was passing through normally when I received a pop up message that says a threat has been detected, and Mozilla had a security patch that I have to download. This is the expedition of phishing malware believer, I closed the browser and restart the computer without having to download anything. When I restarted the computer, everything was normal and I googled for information on what had just happened, to see if I really needed a security patch. A forum suggested that I already have a virus/malware that caused the popup, and that I should deal with the possibility that updating Firefox. Then I refreshed Firefox, which seemed harmless enough. The update took the time, so I finally closed the window to refresh. Maybe I should let the window update but it was taken way too long - after that it's my problem to start with the error message.

  Since then, I've uninstalled and reinstalled Firefox. I also deleted the profile folder in the hope that it would force the creation of a new folder. Nothing has worked. Someone has suggestions for Firefox run again?

  Thank you!

  Hi jbspear, please press the windows key + r and open: %APPDATA%\protector.exe

  There you should find a folder named "Mozilla". try to rename it to something like "Mozilla.bak" (or delete it if you don't like your old firefox bookmarks, passwords and customizations) and then try to restart firefox...

• Update error message failed

  Yet once I get the message - Update Failed — in my profile after I've updated (as admin) in win XP Home - SP3.
  I checked the Task Manager and PowerShell (as administrator) that the only case of FIreFox running you Bleeping error message.
  FF works well in the admin profile and shows to be up-to-date.

  Attached are several screenshots.

  I tried everything, including the uninstall and remove profiles of FF - remaining all users and re install.

  Is there something in the registry I should look?

  Any help is greatly appreciated.

  Thanks for the tip, but I did as before, but in the admin account, not run as....

  I managed to understand this issue. Looks like FF 39.03 was not completely removed. I noticed it is always there (with 40.02 FF) the second time I went in Add-Remove programs. Do you have an another uninstalling FF 39.03 and rebooted.
  All seems fine now... fingers crossed, knock on wood.

  This thread can be closed.

• refox will not download on my computer and Ideleted version I've had (so I can't do a reset). All I get is a blank screen and an error message saying something

  I was erase my browser history and when I arrived at time interval, I went into everything. When I tried to go back to Firefox, I got, it's a blank page and an hourglass. I deleted the program so I could reload a new version. When I try to do it I get this white page and an error message that says "plugin container.exe has encountered an error and needs to close." That's all. No matter what I do, I can not download a new Mozilla.

  A huge history of compensation could freeze the browser for a minute or three. If Firefox closed abnormally while he was cleaning up the database that stores the history (and bookmarks), it may be damaged. I hope that this will not be a problem for you.

  First of all, you can download a complete installer from the following page (scroll to the bottom for your language):

  https://www.Mozilla.org/Firefox/all/

  You should be able to do it in any browser, so if Firefox does not work properly, try using IE.

  You can then run the installation program to update Firefox.

  Second, after a crash, Firefox will try to restore your previous session windows and tabs. This could be properly where a plugin is not put into service and generates error on plugin - container.exe. If you are willing to lose your last open windows and tabs, you can start Firefox up to a blank page. Here's how:

  Type or paste the following text in the search box of the start menu and press ENTER to run it:

  firefox.exe "about:blank"
  

  Does it work? If Firefox is stable, you can try to recover the session previous windows and tabs by using either:

  • Menu > history > restore previous Session
  • type or paste about: sessionrestore in the address bar and press enter

  Any improvement to date?

• Firefox freeze at the start, no error message

  One minute to the next Firefox crashed. Whenever I opened it upward, it became unresponsive. Never an error message, just a pure gel. The CPU is not going into overdrive. I did a complete uninstall. Created a new profile. As soon as I closed my session, the problem persisted. Even in safe mode, the application crashes completely in 1-3 seconds.
  Using the latest firefox
  Windows 7 update

  Hello

  (1) I tried to install Firefox 18. The problem persists.
  (2) since the problem occurred, I installed chrome, opera, safari, and all work. I have no problem not until now known.

  (3) here is the info you requested:
  Windows 7 Ultimate
  Service Pack 1
  System type: 64-bit
  Versions of Firefox used:
  17.1
  18

  (4) here is a more detailed description of the problem.
  After uninstalling firefox, I reinstall using the version 18.0. It installs without problem. Once installation is complete, a firefox window opens and works. I can do what I want. Once I quit firefox, each new instance that I open freezes:

  - Normal mode: Freezes when i click on the + sign for a new tab or click on the address bar or just wait a couple of seconds.
  - Safe mode: I try and open it up in safe mode, a window appears asking me if i want to open it in safe mode or reset firefox.  If i click on reset firefox, the window disappears, a firefox process in open (task manager) but no window opens.
  - Reset firefox.  If I try and reset firefox, the window asking me if i want to open it in safe mode or reset firefox.  Upon clicking reset firefox, a new window opens warning me that doing so will delete ... when i click ok, the window closes, however the original window asking me if i want to open it in safe mode or reset firefox freezes.
  

  (5) I ever get an error message. Where are they kept so that I can join them.

  (6) I installed the recommended 'SUPERAntiSpyware Portable Scanner Personal Edition' and ' user of Malwarebytes Anti-Malware. I left these travel at night and removed some threats. This solves the problem once I rebooted and reinstalled firefox. I hope it was the last time I have this problem again.

  Fixed a problem. Thanks for the support