error message on my laptop

Similar Questions

• C3086UA #A8A: Error Message on the laptop computer says driver is not available and device error

  I tried to print from my laptop, a HP Pavilion G7, and nothing happened I went in devices and saw an error message on the PC icon.  He showed me the yellow exclamation point and says driver is unavailable and driver error.  The icon of the printer showed it's OK with the green check mark. I am an older person with not much technical experience and would appreciate any help on how to solve this problem with the drivers. Thanks for any help you can provide.

  Paul

  Hi @doowop47 ,

  Thank you for your query.

  I'm not sure if it is a printer problem or a problem of computer as you said that the error is on the PC icon not the icon of the printer.
   
  Unfortunately, I was unable to locate your model of laptop Pavilion G7 since the number you provided. This link should help with that.

  How can I find my model number or product number?

  Were there any recent changes?

  You did all your Windows updates?

  Have you tried to run the HP Support Assistant to help with the updates from HP.

  If it worked before you tried to do a restore to a date well known?

  You can also try a Refresh Your PC to solve problems (Windows 8)

  If it is a printer problem, and it is not an HP printer, it would be preferable for you to post in the constructor for the instance of printers.

  If it's an HP printer, please provide your exact name and model.

  Good luck!

• error message in Windows xp 0x0500007b, 0xf7929528, 0xc00000034, 0x00000000, and 0 x 00000000

  Original title error message: windows xp

  Hello.  I recently got an error message on my laptop when I turned it on.  Windows began to charge an and a blue screen popped up. I couldn't continue because it could damage my computer. He says that my hard drive configured and terminate also search for possible viruses.  These errors appeared, stop 0x0500007b, 0xf7929528, 0xc00000034, 0x00000000 and 0x00000000.  I tried to restart my laptop to go into safe mode, safe mode networking and other modes. It just went back to the blue screen.  If anyone knows what happened with it please I would appreciate the help.  Or should I put it in the shop?

  Hello

  · What is the number and the model of the laptop?

  · Who is the service pack installed?

  · Were there any changes made on the computer before the show?

  You can check the link below and try the steps listed and check if that helps: errors troubleshooting ' Stop 0x0000007B "in Windows XP Advanced: http://support.microsoft.com/kb/324103

  You can also check: error message "STOP 0x0000007B" when you restart your Windows XP-based computer: http://support.microsoft.com/kb/316401

• Error message in the SFC

  When I run SFC I get an error message on my laptop - I can't paste the CBS.log here - a long and complicated document journal. I ran SFC to see if I had a corrupted file to prevent my laptop from sleep to Hibernate.

  Any ideas on how to solve this problem.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.

  Full check of 100%.

  Windows resource protection found corrupt files but was unable to repair some of th

  EM.

  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example

  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  The news of 'failure' should be in convertible bonds. Newspapers, have a read of this and follow-up on link (not the tool "fix" of The KB article) - http://www.thewindowsclub.com/how-to-run-system-file-checker-analyze-its-logs-in-windows-7-vista that can help.

  Alternatively, try running the command in safe mode to see if it ends then.

• Error message on the new laptop

  Day 2 of Windows 8 - continue to take me an hour to do what took 5 minutes - main 'problem' is that I don't understand an error at startup - I click on continue and it goes away-while the message is on screen AVG icon will appear in the bottom bar but if I click on cancel or something else (sorry I forgot the other option to continue) new error message disappears and the AVG icon disappears from background.
  
  If anyone is interested, I copied the error message but it of a long and show below, along with details of my laptop - please put my mind at rest and tell me how to stop the message and put things (what) law.
  
  Thank you
  Ian

  Specifications of the laptop HP G6

  HP Pavilion Notebook PC g6 product name

  Product C5J46EA #ABU number

  8 64-bit Windows operating system

  micro processor Intel (r) Pentium (r) CPU B960 2.20 GHz

  6 GB system memory

  slot for memory 4 GB SODIMM Micron Technology 1 1333 MHz

  location 2 2GB SODIMM A - DATA Technology 1333 MHz

  1 Intel(r) HD Graphics graphics device

  card system 56.2 C 1841

  F.14 system BIOS

  1 Hitachi HTS547575A9E384 hard drive

  c: 678.57 GB (637,18 GB free)

  d: 19.3 GB (2.42 GB free)

  audio device 1 IDT High Definition Audio CODEC

  2 audio device Audio Intel (r) display

  power supply electric a/c

  Battery main charge 100% available

  error message
  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.
  
  The exception text *.
  System.NullReferenceException: Object reference not set not absolute instance of an object.
  atAVUS.Form1.CheckUpdates)
  atAVUS.Form1.Form1_Load (Object sender, EventArgs e)
  atSystem.EventHandler.Invoke (Object sender, EventArgs e)
  atSystem.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  atSystem.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  atSystem.Windows.Forms.Control.CreateControl)
  atSystem.Windows.Forms.Control.WmShowWindow (Message & m)
  atSystem.Windows.Forms.Control.WndProc (Message & m)
  atSystem.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  atSystem.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtrwparam, IntPtr lparam)
  
  Loading assemblies *.
  mscorlib
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  AVUS
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /AVUS/AVUS.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly Version: 8.0.0.0
  Win32 Version: 8.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  System.Configuration
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly Version: 2.0.0.0
  Win32 Version: 2.0.50727.6387 (Win8RTM.050727 - 6300)
  CodeBase:file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  
  JIT debugging *.
  To enable just-in-time (JIT), the .config file forthis debugging
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.
  
  For example:
  
  
  
  

  According to this site, it's the update anti-virus designed to help keep AVG updated and current.
  
  However, I wasn't able to find information about it on the site of AVG. Therefore, I don't know if it is officially included in the module use AVG or a third party. You can try to run without it for now and see if AVG updates or not. If Yes, then you are good to go. If this isn't the case, then I would say that it is an official part of AVG and that AVG may have to be uninstalled and reinstalled as a whole to resolve the error message.
  
  It may be interesting to send a request by email to know if you need AVUS AVG.
  
  It seems that some use AVUS universities to keep their anti-virus up-to-date based on this and it looks like they use with AVUS Sophos. If it's the same AVUS, then it more than likely is not part of AVG.

• Various recurring error messages blue box when the laptop is idle

  I have a new (10 months) HP Pavilion dv7 - 3165dx running windows 7 home premium 64-bit.  After that laptop sitting idle for a while, the screen goes black with a blue box error message.

  01/02/11-02/14/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Disable or uninstall any antivirus, commercial defragmentation or disk backup.  Check the configuration of the disk hard yoru and check the updated drivers.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Call Technical Support HP - a talked to Josh: I was sent to HP.com support site to download software downloads and the pilot.  Said it is known the problem and had me run the CHKDSK command to automatically solve problems.

  02/16/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video cards.

  Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000007E (OXFFFFFF800032D3905, OXFFFFF88002B97288, OXFFFFFFFFC0000005, OXFFFFF88002B96AFO)

  Data collection for the crashdump...

  Call the HP Technical Support - talking to Matt: check space drive, and said that it was very good.  Updated graphics driver.  Disabled the hard drive protection.  Power options reset of Hibernate to standby mode.  Update BIOS of F.10 F.15.  Ran test drive: Smart check, DST short and long DST all spent.

  02/17/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  System_Service_Exception

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000003B (...)

  Data collection for the crashdump...

  I don't ' know what to do at this point.  HP phone support seems unable to solve my problem.  Can someone help me?

  Hi DP - K,.

  Thank you for all the helpful tips.  This weekend when I saw my McAFee scan/security reports, even if the McAfee Security Center shows that viruses and spyware works, he did not run a weekly full scan on my laptop since the end of January.  I don't know if he tried to scan and then breaks down, or it will not start.  When I tried to run a manual scan, windows shut down and I got a blue screen error message after about 5 hours of scanning - 63% digital.  When I ran the HP System Diagnostics report, it showed that my Security Center has not recorded an antivirus product.  "The Security Center cannot identify a current antivirus application.  There is no product protection antivirus installed or it is not recognized. "When I ran the HP reliability and history of problem report, it showed that my error messages started on 01/02/11, which is what I remembered.  I was able to restore my laptop to 23/01/11 when I had no problems and then, I uninstalled McAfee security and re-installed software.  I manually ran a full scan and it took 5 hours to complete, it has completed and reported no problems.  I look today and so far, no problem.  If the problem happens again, I will try the suggestion of Avast below.   Thanks again for all your great suggestions.

• I get the Extended player Fatal Error Message every time my laptop boots to the top and I have no idea why

  I have no idea where this fatal of the extended drive error message. I don't play the games on my laptop, but my wife does in his user ID. We are both this error under our separate message ID. We don't remember to delete all programs, but when I try to install Extended Player it tells me that a critical file is missing. I tried using the Microsoft Cleanup utility, but the extended player does not appear on the list. I don't know where to go from here. Can I get help please?

  Hi Justamurray,

  1. How have you tried to install the extended player?

  2. did you of recent changes on the computer?

  3. What is the version of Windows installed on the computer?

  I suggest that you check and uninstall if you have the extended player program installed on the computer using the control panel.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Note: The link above is also applicable to the operating systems Windows 7.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  Care to be more detailed?  What version of Windows?  What is the brand and model of the laptop?  How old was he?  Have you contacted the provider support?  What has changed on your PC between when it was last and now?

• 2 different error messages to clean install win 7 on laptop 2 x 61 attempts

  2 different error messages for win 7 clean install the 2 attempts on my x 61 laptop

  I bought an oem windows 7 dvd disc installation. I tried to install once and got this error message: Windows cannot install required files. The file may be corrupted or missing. "Make sure all files required for installation are available, and restart the installation of the" error code 0 x 80070570

  The second time I tried, when I tried to install windows 7 via a dvd player external rom this message appeared. "Press any key to boot from cd or dvd".

  BOOTMGR is missing

  Press Ctrl + Alt + Delete to restart. »

  the second error message did not work, even if I did cntrl alt del. Any suggestion. It is a computer laptop thinkpad x 61.

  Have you pressed a key after this part of the 2nd message: "press any key to boot from cd or dvd"?

  If you haven't done so already, it's trying to boot from the hard drive, and that's why you're the "BOOTMGR is missing" part of the message.

  Z.

• Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?

  Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator.  Sony supporting not - how make to identift video card in my laptop?

  Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.

  In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.

• Computer laptop is slow loading programs, then I have error message

  Original title: LAPTOP IS SLOW LOADING PROGRAMS, THEN I GET AN ERROR MESSAGE.

  My laptop Windows XP is loading slowly & I get an error message when you click the icons.  Error message: the instruction at 0xffbadd11 referenced memory at 0xffbadd11. The memory could not be "written", click ok to complete the program. I turn off the clean boot windows, and you can click to open the remaining programs quickly, but not in a 'normal' State of windows. What can I do else?

  One of your startup items is badly behave.  You can isolate that through a process of elimination.  Do a clean boot, and then add the items one by one and restart.  When it slows down you found.

  We could be more useful if you gave us your system specs and the specific error message.

• everytime I turn on my laptop, now I get bombarded with the error message that says...

  Hi, whenever I turn on my laptop, I get now bombarded with the error message that says...  The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc?  Any help on what caused cela or how to solve this problem would be highly appreciated.  Thank you

  Try to clean the temporary Internet files...

• I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message: "syntax error:"D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. " MAN. "

  I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message.  one of the components that windows needs to continue Setup could not be installed. Manifest Parse Error: an invalid character was found in text content. Connect the system configuration error: SXS. DLL:syntax error in manifest or policy file "D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. MAN 'at line 0. I bought the oem software installation disc. I bought the computer used and did not get any disk with it. Help, please

  1 person got this response
  Shawn thought it was bad media so I'm a new disc and received the same error does anyone have an idea what might cause this error?

  original title: install windows xp

  Hi sptusch,

  Thanks for posting. Is it a burned disc? If this is you please redownload the image. Also, try the following.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Need help with the error message when you try to transfer a file from one laptop to another.

  I'm trying to transfer a file from one laptop to another using Belkin transfer cable. While trying to install software for my old laptop, I get an error message as follows WET7CABLE ERROR OPEN. LOG FILE. I tried with the support of Belkin and they referred me to Microsoft. Please help me with this question.
  Thank you
  Nelson Santiago

  Hello

  It is a matter of easy transfer Windows.
  Read on this and the solution here:

  http://support.Microsoft.com/kb/980870

  Kind regards

  Joel