Error message "please connect a device supported" when I click on webcam

Similar Questions

• Receiver error message: network connection has timed out when downloading the software iTouch 5.01.

  Original title: software update for my i touch

  I am trying to download the 5.01 update software for my Apple i-touch. However, the download is so long that I get an error message indicating that my network connection has expired and the downlopad do nt go through. How to solve this?

  Hi Gary,.

  What virus protection software is installed on the system?

  I suggest you temporarily disable antivirus software (and any other security such as anti-malware software, etc.) and the firewall on the computer and see if that fixes the problem.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  If you still experience the problem, you could get in contact with Apple support for further assistance.

  Apple support

• Error message: "please connect to the internet to use Google Calendar Sync.

  OK, I have had my new droid last fall, connected my calendar and everything was hunky dory.

  All of a sudden, I can't sync my calendar Outlook via Google calendar with my droid.  When I click 'sync' in the google calendar application, I receive the error message stated in my title.

  I've deleted and reinstalled google; spent a LOT of time searching for an answer, but I'm not getting anywhere.  When I open Outlook it will appropriate online and retrieves the mail... cannot connect for some reason backwards any.  Someone at - it ideas?

  Kirby,

  If you can successfully connect to the Google site?

  If this is not the case, reset the password through their processes, then go back and reset your information on your droid.

  B Eddie

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• Error message: Please connect connected HP printer

  I have a HP Envy 5530 and regularly get the bubble of following error:

  

  Clicking OK on the screen or the printer allows printing to continue and the sayse the printer, it connects with

  "Update in progress

  Update is in progress.  This may take several minutes.  You can check status of ink instant of HP by touching the ink icon in the home menu. »

  The next time that I print, I get the same message.

  without error, but I see the same message the next time.

  Hey @cwknox,

  Thanks for posting in the Forum from HP Support.

  I see that you meet a prompt "connect the printer" ink HP connected and instant when you use your HP ENVY 5530 e-all-in-one printer.  I would like to inform you on this issue.  I have some suggestions that might help.

  Try the following steps:

  • Your printer's front panel, tap the icon of webservices ().
  • If your Web services are not enabled, press OK to activate and allow for automatic updates. The 5530 must print a backgrounder code of request to the printer list - this will be useful later.
  • If Web services are already enabled select print information and hold the impression that results.
  • Then, sign in to your account to instant ink.  If you see a notification indicating that your printer is not connected to instant ink, click the Add Printer button and code of the Info page you printed earlier application type in the printer.
  • If it updates successfully, unplug your printer for a minute and plug it back.

  If this approach re-establishes the connection of the printer to instant ink servers and eliminates connection guests, very well!  If this isn't the case, I recommend that join you our cloud support team. You can click on the following link to start a business: https://support.hp.com/us-en/contact-hp/product/HP-Instant-Ink-series/5264756/model/5401249#Z7_3054ICK0KGTE30AQO5O3KA30F3

  Once you complete the form online to build your business, you can choose among different ways to contact direct.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Error message "please connect to internet to validate your serial number?  I AM connected

  When I try to start a new project, I get a 'serial number validation' popup with the message above.  I am a new user (, still have not been able to use my software despite having bought.)  Any help would be appreciated, thanks in advance

  I tried the live chat twice already, was disconnected twice :-/

• error message: "no audio output device is installed" I have no sound - how to rectify the problem please?

  reinstall audio devices-error message: "no audio output device is installed" I have no sound - how to rectify the problem please? tried most of the quick fix ideas, but nothing seems to work

  Hi Jammyhorse,

  1. What is the number of brand and model of the PC?

  2. when the problem started?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following link and run the Fixit and see if helps solve the problem.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/

  Also check out the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Step 2:

  In the BIOS settings advanced, you can also check if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to run the latest Quick Time, I get the message "Please install application apple support."

  I installed the latest version of Quicktime from Apple, and it seems to be installed OK, but when I try to launch it I get the message "Please install application apple support."

  I am running Windows 7 64 bit on a processor intel 3570 with 16 GB of ram

  Cheerrs

  Garry

  Hello

  As you have problems with the Apple software, I suggest you contact Apple Support.

  http://www.Apple.com/au/support/QuickTime/

  See you soon.

• I get the error code message please connect firewall and protection antivirus please help

  I get the error code message please connect to the internet to validate your serial number, but I'm connected to the internet, I have disabled firewall and virus protection please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• error message: "Please insert a disc into drive DVD D."

  I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

  Hello

  Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Error message 1 and Adobe technical support

  I can't find the post I did a couple hours there on the error message 1 that I kept getting when I tried to download creative cloud and my apps.  I contacted Adobe via the site and the support has been incredible.   Solene access my computer and completely solved the problem in 15 minutes approximately.  Support tech GRAND Adobe, thank you! Solene is incredible.

  Thank you very much for your encouraging and kind words, it means a lot to us.

  Concerning

  Baudier

• error message "Please provide a value for all required fields.

  I try to install enterprise converter on my virtualcenter server.  I use the latest version (2.5u3), and when I get to the part where I provide identification information, I get the error message "Please provide a value for all required fields.  It is, I have - all fields are filled with the correct values.  I tried 2 different accounts - time local administrator and another account, that I've created specifically for vmware and they both fail with this error message.

  Someone has ideas of what's going on here?

  Elf

  The account used for the converter must be able to log on as a service.  This can be set in the local security on the VC server policy.

  geob

• have problems printing wirelessly on my C510 estn. I get an error message that says: I'm paper when I did the paper

  off message on my c510 estn paper

  I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paper

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem occurs.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4073314&prodTypeId=18972&ObjectID=c02248120

  Hope this information helps.