error message: "the printer is configured to use o2 ink cartridges.
My HP C7280 all-in-one printer was purchased in Australia and was then introduced to the South Africa. O2 cartridges are not available in South Africa, the printer can be reconfigured to use the local cartridges?
Hello FANaude.
You must contact the HP support by phone in your country for assistance in obtaining the printer reset to accept cartridges from a different region.
Use the link below to find how to contact HP phone support in your country.
http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html
See you soon!
Tags: HP Printers
Similar Questions
-
printer 6510: can I use 934 ink cartridge in my printer all-in-one 6510?
Can I use 934 ink cartridge in my printer of 6510 all-in-one?
The cartridge HP black 934 works with these printers:
HP Officejet printer, 6220
E-all-in-one printer, HP Officejet 6812 range
E-all-in-one printer, HP Officejet 6815 range
Printer HP Officejet Pro 6230
Printer HP Officejet Pro 6230
E-all-in-one printer, HP Officejet Pro 6830 range
E-all-in-one printer, HP Officejet Pro 6835 range -
Print shop does not open. He was relocated several times. Every attempt to open the following the error messge program appears: The Print Shop 3.0 has encountered a problem and needs to close.
Hello
Check the event log information when you try to start printing 3.
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427
Resolution:
I suggest that you start the computer in a clean boot with printing 3.0 active state.
See the link below to perform the clean boot in Windows XP.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note:
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
- Click Startand then click run.
- Type msconfig and click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
- When you are prompted, click restart to restart the computer.
-
Cannot save edited image. Error message: "the file is already in use or left open.
I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.
Thank you!
Description of the problem:
Photoshop will not save modified files
EtreCheck version: 2.1.8 (121)
Report generated on May 30, 2016 to 19:09:40 PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
iMac (27 inch, mid 2011) (data sheet)
iMac - model: iMac12, 2
1 3.4 GHz Intel Core i7 CPU: 4 strands
12 GB of RAM expandable
BANK 0/DIMM0
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1333 MHz
0/DIMM1 BANK
OK 4 GB DDR3 1333 MHz
BANK 1/DIMM1
OK 4 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac, 1920 x 1080
OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4
Hitachi HDS722020ALA330 disk0: (2 TB)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
OPTIARC DVD RW AD - 5680H
Logitech USB receiver
Computer, Inc. Apple IR receiver.
Card reader Apple
Apple Inc. FaceTime HD camera (built-in)
Seiko Instruments Inc. SII Smart Label Printer 450
EPSON EPSON scanner
Nikon LS-5000 ED
Seagate FreeAgent 1 TB FW
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
Western Digital my book 1140 3 TB
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. Thunderbolt_bus.
Any where
/ Applications/Toast 8 Titanium/Toast Titanium.app
[no charge] com.roxio.BluRaySupport (1.1.3) [click for support]
[no charge] com.roxio.TDIXController (1.6) [click for support]
/ Library/Application Support/Avast/components/fileshield/not signed
[loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]
/ Library/Application Support/Avast/components/proxy/not signed
[loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]
/ Library/Extensions
[no charge] com.LogMeIn.hamachi (1.0) [click for support]
/ System/Library/Extensions
[loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]
[no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]
com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]
/ System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns
[no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]
[no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]
[no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]
Demons of launch system problem: ℹ️
[failure] com.apple.logd.plist [click for more information]
[loading] org.postfix.newaliases.plist [click to support]
[no charge] com.adobe.CS4ServiceManager.plist [click to support]
[no charge] com.avast.secureline.update - agent.plist [click to support]
[no charge] com.avast.secureline.userinit.plist [click to support]
[no charge] com.avast.update - agent.plist [click to support]
[no charge] com.avast.userinit.plist [click to support]
[operation] com.carbonite.launchd.status.plist [click to support]
[loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]
[failure] com.adobe.fpsaud.plist [click to support]
[loading] com.avast.init.plist [click to support]
[loading] com.avast.secureline.init.plist [click to support]
[loading] com.avast.secureline.uninstall.plist [click to support]
[loading] com.avast.secureline.update.plist [click to support]
[loading] com.avast.uninstall.plist [click to support]
[loading] com.avast.update.plist [click to support]
[operation] com.carbonite.launchd.daemon.plist [click to support]
[operation] com.carbonite.launchd.monitor.plist [click to support]
[loading] com.carbonite.launchd.watcher.plist [click to support]
Mail request hidden (/ Applications/Mail.app)
iTunesHelper UNKNOWN (missing value)
Dropbox application (/ Applications/Dropbox.app)
Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)
Screenhero hidden UNKNOWN (missing value)
Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)
AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)
LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]
Web of Google Earth plugin: Version: 6.0 [click for support]
Default browser: Version: 601 - SDK 10.11
Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]
CoolirisWebKitPlugin: Version: Unknown [click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]
AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]
FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]
Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]
iPhotoPhotocast: Version: 6.0
AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK
Facebook cleaner
Latest news
1 - ClickWeather
Facebook Photo Zoom
Unplug
Ghostery
Dashlane
Amazon search discount
PriceBlink
WOT
AdBlock
3rd party preference panes: ℹ️
Flash Player [click for support]
Flip4Mac WMV [click for support]
TechTool Protection [click for support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB
Destinations:
Feedback Up [Local]
Total size: 999,86 GB
Total number of backups: 50
An older backup: 2016-04-06 19:21:02 + 0000
Last backup: 2016-05-31 01:28:34 + 0000
Backup disk size: too small
Backup size GB 999,86 < (disc 536,90 GB X 3)
By CPU process back to the top: ℹ️
100% CarboniteDaemon
3% WindowServer
Console 3%
hidd 1%
1% adobe Photoshop CS4
Top of the process of memory: ℹ️
Com.apple.WebKit.WebContent 696 MB
541 MB softwareupdated
Safari 503 MB
CarboniteDaemon 399 MB
348 MB mds_stores
Virtual memory information: ℹ️
1.59 GB of free RAM
3.24 GB of RAM active
6.54 GB RAM idle
1.51 GB RAM cable
GB Page-ins 212,57
Breaks in Page 443 MB
Please read this message before doing anything.
This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.
The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.
-
How can I fix the error message "the print spooler service does not work."?
All printer drivers that I had loaded do not work or have disappeared. After you download the printer drivers, I got the error message: "operation could not be performed. The print spooler service is not running. "I have Windows XP. I need to print now!
To start the print spooler service, click Start > all programs > Accessories > run. In the run box type in services.msc. In the Windows Services window right-click on print spooler and select open. You will then see the options "Start automatically", and then on the button 'Start Service'. Click on those and then click apply then OK. Who should start the print spooler service, however, if you get an error message, see the link below for more information.
-
Hello
until yesterday (with the new driver), everything was fine. Now the printer (Officejet 7310) print no more when it is connected to the network (ethernet or USB (to the router). The printer will print directly connected via USB to my MacBookPro, also when connect to my iMac.
Tried everything, deleted and added to the printer (green light), restarted the pc, printer etc. Cannot read the extra level, utility HP does not get data to the printer.
Everyone is any hint?
Thank you very much!
Efi5
Hi Efi5,
Make sure the printer connected to your router by Ethernet.
Unplug the router for 30 seconds, plug back in and try printing again.
If it persists, try resetting the following printing system and check if this may help you:
* Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
Click on the Apple menu and then click on System Preferences.
Select Print & Scan.
Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
Click OK to confirm the reset.
Type your user name and password.
Click OK. The printing system resets.Now add the printer by clicking on the sign more.
Kind regards
Shlomi
-
trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network. Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].
I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com
-
I use Firefox version 3.0.19 and I have Windows 7, which came with a new computer. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.
This has happened
Each time Firefox opened
== 1 day with the new computer about two weeks ago.
Looks like you got the wrong printer selected.
When you get the print window, choose another printer in your printer dropdown. You seem to have a fax printer selected instead of a physical printer.
-
After uninstalling my XPSp3 o.e., I started getting the following error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.
Uninstalling included 7 entries registry to remove all the * files dbx and files *.wab addressbook, except himself. After uninstalling and receipt of the error message above, I tried to use my CD of XP OS to re - install O.E. as a component of Microsoft without success.
I upgraded to Outlook 2007 and imported to the address book of O.E. successfully before uninstalling.
Please advise me how to get rid of the error message always appearing at startup.
Thank you
You can't really uninstall and reinstall OE without having to reinstall XP as OE is a part of it. I hope your foray into the registry does not require a reinstall of XP.You now have the DBX files? WAB files?If Outlook has been on your machine before this event, see the reference by PA Bear in this thread
http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995If Outlook has not been installed, see these.All of you who have the same cause. Something is screwed up with your address book.It could be several specific problems, which include:
-corrupted WAB file
-damaged or incompatible DLL files for the addressbook
-have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
folder and there is something wrong at the end of OutlookFor more details, take a look at:Error message: the Message could not be sent. Some invalid recipients
(Outlook Express: there was an error opening this message)
(The address book failed to load. OE is configured incorrectly)
(Corrupted or incompatible WAB32. DLL file)
http://support.Microsoft.com/?kbid=239135
OLEXP: Error Message: failed to load address book
(There was an error opening this message)
http://support.Microsoft.com/?kbid=269777
http://support.Microsoft.com/?kbid=310873
OLEXP: MSIMN has caused an IPF in Module Wab32.dll
http://support.Microsoft.com/?kbid=247706
Error message: failed to load address book, Outlook Express is...
http://support.Microsoft.com/?kbid=191946
Error message: could not open address book, a component is missing
http://support.Microsoft.com/?kbid=192321The address book Windows (WAB)
http://www.insideoe.com/files/WAB.htmTo share Contacts between Outlook and Outlook Express
http://www.slipstick.com/contacts/oeshare.htm -
When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.
Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."
I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?
Hi ChristineKrause,Here are some links that might help you:
Advanced troubleshooting tips for General USB for Windows XP problems
Try the steps listed in the items mentioned above and see if that helps you solve the problem.
-
Just received this printer refurbished HP 2 weeks ago to replace the one who had a problem with printhead. Printing worked initially, but now I get the message "the printer into an error state" when I try to print. The screen at the front of the printer automatically turns off as well, as he is extinguished.
Hi @M45,
Thank you for joining the Forums of HP Support!
I see that you are unable to print because the printer is in an error state. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I would like to do a hard reset to see if that will solve the problem.
- Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
- Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
- Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
If there's an error message displayed in the menu on the front panel, before the display of the printer turns off?
Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.
- What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
- Click here to update the firmware of the printer with a USB connection.
If you have completed all the above steps and your product still has a problem, service the product.
Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
Cost of repair out-of-warranty printers may apply.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: http://support.hp.com/us-en/contact-hp
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on options contact HP - click Get phone number
File number and phone number are displayed.I hope this helps. Please respond if you have any questions. I wish you a nice day!
-
When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.
Hello bdoolen, please try to reset firefox and see if that can solve the problem...
-
Error message: the software can be installed by using the command "run under...". ».
I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came. Why?
Try right click on the setup.exe > run as admin.
If this does not work, try the Vista Hardware and drivers Forum:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
See you soon.
Mick Murphy - Microsoft partner
-
Prob Winmail.
Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.
Using a digital signature? Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.
Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.
Steve
-
Want 4500: Connection error! The printer could not connect to the server
Connection error! The printer could not connect to the server!
Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!
I am successfully connected to my router and can print from my pc and my ipad with airprint.
PC "will not find"the printer either for purposes of updating
What I need to change the DNS. If so, I don't know what it is or how to do it!
I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.
Can anyone help?
Very frustrated customer :-(
Hi @roopuk,
Thanks for getting back to me.
Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users. Try the same steps as described above, but this time use the following parameters:
Manual preferred DNS Server: 209.244.0.3
Auxiliary manual DNS server: 209.244.0.4If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.
What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services. In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server. HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.
Here is the information that you need for your provider service to open ports on your router/modem...
-Multicast must be enabled
-Hello enabled for AirPrint (relevant for iOS and Mac OS users)
-Mac filtering should be disabled
-Also, make sure that your router's firmware to date if
necessary
- The dmz on the router mode and turn it on to the printers IP address: _Ports to open are: Eprint and Apps
Incoming Ports.
UDP
80
443
------------------
Outbound portsTCP
5222
5223
-------------------
Once they are open, you should have no problems connecting to services web eprint on your device.I would like to know how it works for you.
Kind regards
Maybe you are looking for
-
Y at - it an indicator to show how much my mac started from?
I just cloned my internal hard drive, so I should have 2 bootable volumes now. I went to test (to ensure that the cloned disk works and is able to start properly my iMac). I restarted the iMac using the down option. I chose the clone of startup, bu
-
6 s iPhone crashes when you use the keyboard
Hi guys My iPhone (iOS 9.2.1) 6s freezes when I use the keyboard, doesn´t question in what program. After about 10-15 seconds to stop the gel, but only until I have started typing again. The only why to solve the problem is to "quick restart" operati
-
Disinfection of screen on iPad 3.
Is there a safe and effective way to disinfect the screen on the iPad 3. I realize that he has a sensitive coating, so I can not should not use an alcohol-based cleaner.
-
the error code for the windows live messenger is 80072efd
-
Shooting of the Modes PowerShot A2300
I'm moving to the AUTO mode for the other firing modes listed in the manual. For example 'P', or fisheye or unclear. The device is new and is my first Canon camera. It replaces my old 3 MP Pentax Optio 330. The Canon works well in AUTO mode, but I'