Error message when you import fixed active information in Microsoft Dynamics GP: "no active window. (Line #14) »

Similar Questions

• Why I get an error message when you import directly XAVC images filmed on a Sony FS7?

  I am importing XAVC footage of a Sony FS7, and when I import the file XDROOT, first gives me an error message 'Failure to import a file' saying only that "the importer reported a generic error." And yet, all the video & audio seem to actually come and play very well in the front. It seems strange and a little disconcerting, to get an error message that maybe I can just ignore.

  If you do not import this file, you use the media browser to navigate to it and import from there.

• Error message when you import a glide (attached)

  Announcement on behalf of the colleague who gets the following error when you import slides of cp:

  

  any help appreciated

  Thank you

  Hi costs.

  Instead of importing your slides, try to copy and paste them from the original of the project file in a new instance of Adobe Captivate and see if that makes a difference.

  Let us know how you go.

  Best regards

  Mark

• Error message when you import requisitions

  When you want to import requisitions of po_requisitions_interface_all table using import demand request that we get the following error:
  
  Preparer is not a user online
  
  Cause: The preparer must be a user in line if the application is not approved.
  
  Action: Make the coach a user online.
  
  Action: enter a trainer who is also a user online.
  
  I can't find anything on this error om metalink. I checked the responsibilities of the user etc. His user name and all responsibilities were the expiration date but I removed all the dates end and tried to run demand for import of requisition again, but we still have the same problem. It is in the trust hierarchy and is set up as a buyer. Does anyone have advice?
  
  Thank you
  Roald

  If the error is not in the documentation or in Metalink, then opening an SR would probably be the best (and only!) road.

  Srini

• "File type not supported" error message when you import jpg files into my Joomla blog... I just updated to the latest FF of the old version. Help!

  I've just updated all my FF browsers to the latest version and now regret it.

  Can I go back? Security be doomed, because I manage a daily site and use jpg all the time. When I open Joomla to create my new assignments, the FF browser now blocks the download of all the jpgs on my web server. Safari has still properly download jpg files, but does not allow other manipulations of images (when I work in Joomla).
  (1) can I fix in FF
  (2) if not, can I go back to a previous v. of FF if I now v. 12?

  You have the option to update PVE? This thread suggests she could solve the problem: Joomla! - View topic - problem downloading photos in the JCE Editor. Another suggests to disable a different download option (but that means nothing to me): type file not supported - file: undefined. Extended image 2.0.2 Manager.

• Trying to create a bootable Windows 7 x 64 Flash drive. Get the "invalid MS-DOS function" error message when you try to copy the file 'bootsect.exe.mui' of the Windows ISO on Flash drive

  The title pretty much everything said.  I have an installer the ISO of Windows 7 Professional x 64.  I am trying to create a bootable flash drive using these instructions:

  http://www.OSNews.com/story/20795/Installing_Windows_7_on_the_Aspire_One_or_Any_Other_Netbook

  I followed all the steps in the guide without problem.  Windows Explorer shows the drive is NTFS.  I can copy all other files of ISO on the FlashDrive without problem.  Only, I can't copy this file.  I tried to copy it to my hard drive rather than on the flash drive, and it still does not work.

  I tried to create a file with the same name by using Notepad to see if there was a problem with the file name.  I can copy this file on my hard drive flash drive, but I can't always copy the ISO file.

  I am running Windows 7 Home Premium x 64 edition and using a Corsair Flash Voyager 16 GB flash drive.

  Help, please!

  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
  http://www.windowsvalley.com/blog/install-Windows-Vista-and-Windows-7-using-bootable-USB-storage-device/
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  How to install Windows 7 from a USB drive without Windows 7 ISO DVD
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• 0001 0002 error message when you install printer drivers

  I get the 0001 0002 error message when you try to install the drivers for a Canon Pixma MX892 printer. Five different Canon representatives tried to find a solution - nothing works. (It seems to be a Windows error message rather than generated by the installer of Canon).

  The error message appears when a) using the disc of Canon or the drivers of its Web site; (b) after a reboot selective; (c) when the Norton firewall is disabled; and d) each combination of a) through c). It also occurs when

  The exact time wherever it occurs during the driver installation process is when Setup "enrolled in the program of information."

  Is the exact wording of the message: an error has occurred while files were copied: 0001 0002.

  I am running Vista 32 bit and download the drivers using Firefox 18.0.2.

  After you have installed many printers without a hitch, it drives me crazy.

  Like you, I thought it was an Epson printer software installation problem and went bought a Canon.  Still I can not install two printers software.  The Epson and Canon customer service can not helped at all.  That's when I decided to contact Microsoft.

  Yes, I paid for the premium service, and I am pleased that they have set all my PC problems.  Takes about 2 to 3 hours to complete the work. I firmly believe that it is worth the money, in my case.

  In any case you can try this free fix by running Microsoft FixIt from this link or copy the address into your browser-

  https://support.Microsoft.com/en-us/mats/windows_file_and_folder_diag/en-SG

  I had also used this FixIt several times since to 'fix' everything OS files were inadvertently corrupt or have "disappeared".  Good luck.

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• Why do I get an Error Message When you use "Embed" to access a file png (for an asset class)?

  I use Flash Builder and Starling to create a new project. I created the initial classes for Starling running. Everything works fine.

  However, I created a class of assets (that will manage all the assets of the project) and I get an error message when you reference the png file. This png will serve as the main screen for the project. See below:

  {

  Import starling.textures.Texture;

  public class active

  {

  [Embed (source = ' assets/screenMain_background.png']

  private static var MainScreen: Class;

  public static var MainScreenTexture:Texture;

  Public Shared function init (): void

  {

  MainScreenTexture = Texture.fromBitmap (new MainSreen());

  }

  }

  }

  I have the file in a folder called 'active' which is in the main project folder. Why I get this error?

  In the "Issues" tab it reads as follows:

  "Couldn't find Embed source" assets/screenMain_background.png"

  

  you have a path problem.

  Start by adding the current directory in your src directory.  If this fails, experiement.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• C00D11C8 error message when you use Windows Media Player

  How to fix C00D11C8 error messages when you use Windows Media Player.

  I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

  I downloaded the GoToMeeting codex and the problem was solved.

• Receive error message when you try to download the update update for PowerPoint 2003 (KB957784) security

  I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).

  I searched night and day for a solution - even contacted microsoft by e-mail.  The specific error is: Code 57F

  It is displayed when I press the "get help with this error message:
  "WindowsUpdate_0000057E" "WindowsUpdate_dt000"

  It was the E-mail feedback:

  Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.

  I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.

  MowGreen-
  Understood the factor of masking - has considered it.  Still, I send my appreciation in this matter.  I would like to know if you think I should download the SP2 for Vista.

  Peace-
  Matt

  Service Pack 2 offered by Windows (automatic) update yet?

  Windows Vista and Windows Server 2008 service Pack is not available for installation from Windows Update and automatic updates does not offer

  Cause
  This problem can occur for different reasons. However, the following reasons are the most common:

  • Already, you have the service pack installed and do not realize it.
  • You must install another update before you install the service pack.
  • You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
  • Components of the system that you must have to install the service pack are not installed on your computer.
  • You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
  • You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack

  Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:

  955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009

  See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
  The MS KB article below has sound advice for steps, you have to take before installing a Service Pack

  What you need to know before you install Service Pack 1

  Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation

  Start here - free support for Windows Vista service pack problems

  If a problem occurs, you can also solve problems installing yourself-
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  MowGreen MVP Data Center Management - update of safety Consumer Services