error message when you try to print from the windows photo gallery

Similar Questions

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

  Original title: C7180 printer all in one

  I'm unable to print I receive ink system failure-code-Oxc18a0201.

  HELP IF YOU CAN

  THANK YOU FOR YOUR TIME.

  Hello

  1. what operating system is installed on the computer?

  2. you use all-in-one printer, HP Photosmart C7180?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link mentioned below if you have HP printers and see if it helps.

  Error Oxc18a0201 INK system failure C7180

  Hope this information helps.

• Error message when you try to print

  I received the following error message when you try to print a document.

  "Spooler subsystem App stopped working and was closed.  Production of Windows warn if the solution is available.

  I have not had any problems with my printer up to today.  How will I be notified by Windows and is there anything else I can do.

  Are you facing this problem when you print using all applications?

  Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• After installing IE9, I get error messages when I try to print from a Web page

  original title: res://ieframe.dll/preview.js problem!

  I installed IE 9 since when I can't print pages on the web and my windows mail gets frozen. I get this message when you try to print, res://ieframe.dll/preview.js. I used online tools to analyze and repair sites, but it seems that I have to pay to make a repair, something nice, yes you have a problem, but we pay to do the sort! I can print from Chrome and Word docs. I have vista. Norton and I updated and used its own registry.

  Thank you very much.

  But before I saw the above I uninstalled IE9 and went back to IE8 and I coulld printing web pages and emails on the mail of the window. I'm in tears of happiness.

  Lesson, if it's not broke don't update.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• I get an "Unable to generate thumbnail" error message when you try to set up the blog using RSS Blog

  error message when you try to install blog using blog rss

  Ok. I managed to remove the two problems at the moment.  Later, I'll try to add the blog.

  Thank you for your help.

• Re: Error Message When you try to print to a network printer

  I just bought the new laptop, and when I try to print to a network printer (one that I always printed at front), I get a message: "The Active Directory Domain Services is currently unavailable" - I can't add a network printer at all! Help!

  Is there a setting I need to change to be able to add network printers?

  I think you should contact your local administrator and let him install this network printer. He knows how to install the correct driver and how to find the location of the printer.

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Why I get these error messages when you try to print a pdf file?

  'This document could not be printed' and then, 'he is have not chosen to print pages.

  I've already printed these backup files.

  EDIT: now, I'm getting "the plugin cannot start the broker.

  What the hell is happening?

  Post edited by: Buckawicki

  All what I can say is that you try to upgrade to the latest version of Reader X with http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.5/misc/AdbeRdrUpd1015.msp

• HP Deskjet 3522. Cannot print from the windows photo gallery

  Hello

  I use windows vista home premum. I am connected via a wireless network. I can't my phone eprint and print photos from my email. I can also print from the internet. When I try to print a picture from my hard drive I get "unable to communicate with the printer" error message. The message to suggest that I update my IP address. The IP address is updated and accurate. Also, when I check my status of the printer, everything is OK and I can print the test very well. Help, please!

  Thank you!!

  It worked! I removed my old printers and it will show now! Thanks for the help!

• Error message when you try to print a P.C. LR 2.5. . .

  I don't really know why I get this error message - it reads like this:

  
  

  There is a (or however many there are) image in this print job that is not valid.  She may have been saved in an unsupported file format.  You will not be able to print this image.

  
  

  
  

  But the images were saved in LIGHTROOM!

  
  

  Here's what I did:
  (1) I shoot in RAW - download my photos on LR

  (2) change them accordingly

  (3) export and create a jpg file - they are now re-numbered sequentially.

  (4) I will then import the newly exported jpg back in to LR so that when I create a piece of evidence for my clients names/numbers... that's when I get the above mentioned error message!

  
  

  Help!

  
  

  What I did and how can I fix?

  
  

  Thank you!!

  Could you post one of the offending files? Which could give us some tips. Certainly, you should really have no problem any reimport the jpg file exported from Lightroom and print, even if you have to really make sure that you have enabled "treat files next to raw as a separate photo files jpeg" in the Panel preferences to import, otherwise you could get in the disorders strange if you reimport the jpeg file with the same filename exactly as your RAW files.

  Finally, the last version of the LR is 2.6.1 update at that.

• HP Photosmart 7260 - I get "network busy" message when you try to print from home network

  I've included just a mac pro with Snow Leopard OS on my home network. I tried to add the shared printer, but even with the IP address, I can't print. Work of all my other pc. The host computer uses Windows XP, DELL router with firmware update, the printer is connected through a router. I already downloaded the latest drivers from the Apple site. Without success.

  OKAY, OKAY.  Honestly, I'm not very good with printer sharing, especially across operating systems, but I'll give it a shot.

  First of all, just to be clear, the printer is connected to a XP machine via USB and you're trying to print via a router, right?

  Let's try the simple approach:

  1. enable the account on the XP machine.

  2. on the Mac, go to System Prefs > Print & Fax, click the plus sign "+" to add a printer, and then click the Windows icon at the top.

  3. go to the XP machine, you may have to connect to it.

  4. choose the appropriate driver in the menu dropdown.  If it does not exist, choose a Gutenprint driver.

  Yet once again, I'm not very experienced with that - let me know how it goes.

• Enable two-way to care will not be checked if I get a communication error message when I try to print from my Lexmark Pro905 (using Windows 7 64-bit)

  Help, please!  I tried to fix this for HOURS, reading the TONS of info. on the Internet without success.  I have installed and reinstalled the software Lexmark a dozen times.  It installs Lexmark Pro900 Series (network) and Lexmark Pro900 series (USB).  The "two-way" box will remain enabled in the properties of the printer to the USB version but not the network version which is what I want to use (since I want to be wireless).  I have no idea how to solve this problem. Analysis of my computer, copy, etc, everything works fine with the printer... I can't print... it keeps saying "Communication not available" and check the box bidrectional.  I check, hit apply, then ok, but then when I go back into the properties of the printer it is more verified. :(

  Hi Nicole,.

  I suggest to read the article below and follow the instructions.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  See also the article given below to set the printer as the default printer.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  If the problem persists, I suggest you to contact the support of printer on the issue.

  http://www.Lexmark.com/en_US/about-us/company/contact-us.shtml

  If you have questions related to Windows, feel free to post. We're here to help.