Error message Windows Vista "BSvc processor stopped working, please close the program.
Nuisance error message pop up every 10 minutes, I did an analysis complete and have disabled incident reports, but the message persists to arise. How it can be stopped.
Hey Gary
You could try to clean boot your device, to see if a service is the cause if it is, the error must occur is no longer after it is initialized to clean. A guide to clean the boot can be found here
I also read some people removed some tweaker pc utilities pc or pc performance enhancing software to their computer and that seems to work as well.
I would like to now if the error persists after a clean boot
Yuri
Tags: Windows
Similar Questions
-
Error message "Windows Media Center has stopped working" what Xbox Live is connected.
Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI
I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.
Hey, Cliff,
1. what operating system is installed on your computer?
2. Windows Media Center works great if you do not connect Xbox Live?
Follow the step in the article below and check if it helps.
While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".
http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
At the opening of Windows Live Mail, I get an error message "Windows Live Mail has stopped working" a second error message then cuts in "a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is not available"Unfortunately Windows does not close the program after waiting for an hour. I managed to twice using the system restore, but that failed even now to solve the problem. I am now resorting to Webmail using the messaging system.
Windows Live Mail Forum is located here.
http://www.windowslivehelp.com/forums.aspx?ProductID=15 Bruce Hagen ~ MS - MVP [Mail] -
Error message "Windows Live Messenger has stopped working"
"Windows Live Messenger has stopped working" Message appears when I try to sign in my e-mail to check my e-mail messages. Whats up with that? I have to go through my hotmail to get my e-mail messages. Has anyone else had the same problem? Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Please repost your question in the forums of the Live Messenger portal at: http://windowslivehelp.com/product.aspx?productid=2.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hello.
Recently, my Dell XPS M1530 (Windows Vista 32-bit) has been extinguished during the execution of the system updates (we had a power outage during the night and I didn't) and would only start in safe mode. I moved all my documents on a portable HARD drive and reinstalled the operating system to try to save the computer.
After I did that and reinstalled the drivers (downloaded from the Dell site via my system identification label), I started to load my programs on it (Adobe, Microsoft Office, etc.). After I install a program and exit the installation window, Vista stops responding. I can't click on the Start button (the mouse will go over it, but it does not allow me to select) or one of the other button I have in my toolbar. I can't click anything in the Dock of Dell at the top of my screen, either.
The only way to turn off the computer must press and hold the Power button until the laptop turns off. I HATE doing this, but there is no other way to turn it off once a program has been installed.
Any thoughts on what is happening here? I hope this is just some kind of error on my part - I can't afford to get a new machine. I wanted to upgrade to Windows 7 (my machine can handle), but I don't want the same problem occurs.
Thanks for your help in advance!
Hello
As you re-installed Windows and the problem persists the rules well enough software. The power
failure should be accompanied by a power surge or other that has caused a problem in the computer.Makes it sound like there are hardware problems that can probably be repaired. Have you looked at the system
by a real computer store (not the leeks and the glances at a Best Buy or other stores) or Support of Dell.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Message "Windows movie maker has stopped working".
Original title: Windows Movie Maker
When you use Windows Movie Maker - the application generates the error message "Windows movie maker has stopped working" and close. What happened several times. What can I do to prevent this? I use Windows 7 and Movie Maker 2011.
Not sure, but have you tried to reinstall WLMM, or perhaps fix?
See - http://support.microsoft.com/kb/938275/en-gb and try the repair option first.
Also, make sure that your graphics card and your PC sound card drivers are up to date. Go to the manufacturers technical support for your PC brand and model site and see if there are newer drivers supported. If there is, and the repair does not help, try them. Make a restore point on your PC first, and if you like you should be able to "roll back" to your existing installation if you need to.
You can also try a SFC/scannow to see if that detects and repairs problems of any OS if the above does not help.
-
My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.
I'm almost illiterate with these things.
Any help
Thank you
Original title: error message
Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.
To test your installation
You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.
-
Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell. I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return
Hello
1. when exactly you get this error message?
2 are you able to boot into the office after getting this error on blue screen?
3. don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps.
Method 1: Try to start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: If the problem persists, then try to run the Startup Repair tool.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
Hope this information is useful.
-
Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
Hey shousell
stoppped working covers a lot
If you can not start, follow these steps
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
or transfer your question in forum windows update link below
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
Walter, the time zone traveller
-
I recently started getting this message "Windows Task Manager has stopped working
I started recently getting this message "Windows Task Manager has stopped working" I tried;
Windows Update
Restart the computer
Disabling all non Microsoft products on related Msconfig
Disk fragmentation
Malwarebytes
Full scan of the computer AVG
Safe Mode by using the command "SFC/scannow".And still no solution
Help would be appreciated
Ashley
The blue projection arrested?
You have reinstalled all Windows updates?
Do you have updated all the drivers of motherboard?
-
Initial version of updated title: windows
My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.
Hello
Have you made changes on the computer before this problem?
Method 1:
Troubleshoot problems with installing updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
Try the procedure described in the following article and check the status of the issue.
http://support.Microsoft.com/kb/822798
Restart the computer and check it please for windows update.
Hope the above information is helpful.
-
I just updated to 2015 for CC in Photoshop.
The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes.
Help please!
If you use Windows comp, you can check below links:
-
I face a problem in photoshop cc 2015. When I close a tab, then a pop - up massage a problem caused the program to stop working correctly. Please close the program. solve this problem
Try to uncheck 'use graphics processor' in preferences and restart Photoshop.
-
Ive had this problem for a while now... imnew for vista because it's a new computer.
I've sorted it but I'm not sure how and now the problem is back.
When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.
Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...
some can help me please.
Sally.
Hello
Sorry we don't communicate via this forum.
You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
on the computer or just their toolbar in Internet Explorer?-------------------------------------------------
If there is no antivirus on the computer here is what I use and recommend (except for one
program like Prevx, you don't want more than one antivirus on the computer program
much less running because they interfere with each other and lower security). Each combination
of her below you will warn of malware without toolbar from PCtools running online.Here's what I use and recommend: (these are alll free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
MBP (2012) having huge problems since Os Sierra update.
Hello! While I own this Macbook pro (mid-2012) which worked like a charm until yesterday. I've updated to Mac Os Sierra 10.12 yesterday and since then, I had several problems, here is what happens: First, I could not boot up the laptop. Kept opening
-
What format the card SD must be for open C of ZTE with the Firefox OS?
-
Hello Just got a new iMac for my birthday. How can I sync my iPad (which has been synchronized on windows so far) without losing all my information? The new synchronization will delete all my data? Thank you
-
HP officejet 4500: printing problems
Hello. I have a HP officejet 4500 and recently plugged in a new dell desktop computer (windows 7) and it will not print and I don't know how to initialize a process steup. Can someone help me? Thank you!
-
I ran the upgrade wizard. I'm still not sure what it means
Hello Preamble: I'm not tech savvy, please he dumb down for me. I ran the upgrade wizard and I'm still not sure if the upgrade is a good idea. I need to know whether or not it is compatible before moving with her. I have a Dell Inspiron 1525, running