Error messages from backup system «Ox8078014B and Ox80070570»

Similar Questions

• error message from backup and restore Windows 7.

  Original title: ronen b.

  I can't use the backup and restore application on windows 7.

  When I opened this feature it gives me just the header of the "backup and restore" but not the full application.

  When I try to restore from a back to the top, I get the message "the backup application could not start due to an internal error. the service cannot be started because it is disabled or because it has no enabled devices associated with it. 0 x 80070422. »

  It could happened after I run the registry cleaner ccleaner but I'm not sure.

  Best regards

  Ronen

  Hello Ronen,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to suggestions from John Rubdy Moderator Forum Microsoft responded on April 12, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/backup-aborts-with-error-code-0x80070422/639e2b91-0d65-40E0-Aed4-7d8bffd6609b

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Error messages from end of file and preferences at boot

  So I have Photoshop CS5. I get an error message when I boot. End of file error message, first THEN saying could not initialize Photoshop because the preferences file was invalid (it has been deleted). So I uninstalled Photoshop using the button uninstall the app, then re-installed Photoshop but the same error message appears when I re - install Photoshop so what's the problem here?

  Preference files will survive a uninstall and re - install. Then reset using the shortcut when you start Photoshop.

  • Reset the Photoshop preferences?

• whenever I filled with adobe reader, I get an error message from windows about memory and then stop the adobe reader software

  I just downloaded adobe DC drive and when I go to fill out with the information it gives me an error about windows memory?  How can I fix it?

  NICOS, thank you very much for your answer.  I had to uninstall my adobe reader software and then reinstall adobe 10. Do not know why.  But he workerd yesterday.

  Clayton Chincio

• When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  Using Windows XP Profwssional.

  (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  (2) can I use this feature when both computers are on the same network?

  Hello

  (1) you must configure your computer to use the remote control - see here:

  http://www.winxptutor.com/raenable.htm

  and don't forget to make the firewall exceptions

  (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

  Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

  LC

• I have an error message here fatal system error status 0x00000000 and (0 xC0000001 - 0x0010037c can someone help me)

  • Hello I have an acer 5535 with vista home premium 64 bit, I ordered the acer windows 7 upgrade and I put 8 in and was able to get threw the first disc it gave me the option of removing the acer erecovery system empowering so I did and my computer off in the process, so I started it up and it wouldn't load windows 77 disc so I just kept vista on my computer and went to the site acer and re downloaded acer e recovery it downloaded and I tried to restore my computer and I got the screen black of death with the cursor flashing today I got the recovery disc in the mail from acer to fix my computer but when I put the disc in it will load only the first disk and then cut what happened the first for the second time I set the time and I recived an error message that says STOP: C000021A and less it was displayed {0 UNRECOVERABLE SYSTEM error STATUS x 00000000 AND (0 xC0000001 0X0010037C SYTSTEM SHUTDOWN and tyhen my computer turns off the only thing I can do is to get into the bios, I think it's where I hit f12 I tried to get the disc to load by f12 and it load and stop at the center of the process I'm not savvy)} in computer science, but I wish well for some suggestions iam going crazy here without my computer Please HELP :)

  Hello

  I suggest you perform a new installation of Windows 7 by formatting the hard drive.

  Follow these steps:

  1. turn on your computer so that Windows starts normally, insert the Windows 7 installation disc or a USB flash drive, and then turn off your computer.
  2. restart your computer.
  3. press a key when you are prompted, and then follow the instructions that appear.
  4. on the Install Windows page, enter your language and other preferences, and then click Next.
  If the Install Windows page does not appear and you are not prompted to press a key,
  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the license terms, and then click Next.
  6. to the which type of installation you want? page, click custom.
  7. on the where you want to install Windows? page, click options (Advanced) readers.
  8. click on the partition that you want to change, click the formatting option you want to run and follow the instructions.
  9. When you are finished formatting, click Next.
  10. follow the instructions to complete the installation of Windows 7, include the name of your computer and setting up an initial user account.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-frequently-asked-questions

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• Message from Windows 7 Ultimate and 0xC004C003 error

  I have a HP desktop computer and it was running windows 7 Home. I decided to update the memory and install windows 7 Ultimate and since my computer is having a lot of trouble to work again. I can't install the program to run different devices such as printers or run a virus program that I own that were installed before the upgrade. I get the error message: - 0xC004C003 with a description - the activation server determined the specified product key has been blocked. I don't know what that means. Can someone help or if you have an idea why this happens. I own all the programs

  Computer is a HP Pavilion p6731a with 16 G of RAM desktop computer

  ignore the error messages, it should always copy and paste

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I got this error message "winrscmde has stopped working and was closed".

  ERROR WINRSCMDE

  I got this error message "winrscmde has stopped working and was closed".

  Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options...

  Thank you

  Bruce

  Hi Bruce,.
  Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Firefox 3.5.1 running Vista has stopped working. No error message. Tried to uninstall and install also the latest version and get a message saying that I must first close Firefox (which of course obviously does not work)

  Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.

  This has happened

  Don't know how many times

  I restored my system to an earlier date, December 2009

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)

  Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.

• error message from Windows media player C00D0FEA

  What is the error message from windows media player C00D0FEA and how to fix it?

  Hi blaque007,

  (1) when exactly you get this error message?

  (2) since when are you facing this problem?

  Please quote the complete error message you receive.

  C00D0FEA: this error may have been triggered by an error in another program or a component of Windows.

  See the link below

  C00D0FEA

  Method 1: You can check the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1bb18155-1614-4ad6-9e78-90bcd08deb0a

  You can see the link below for more information:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.