Error messages in Event Viewer

Similar Questions

• I got more than 50 error messages in Event Viewer. How can I fix these problems?

  Between 3:45 am PST and 5:46 am PST, I found more than 50 messages of error in Win XP Home Ed.  SP 3, event viewer.  Can someone help me to solve these problems, please.

  First of all I would like to clear you all events, right-click each of the topics and choose erase all entries, you can save if you wish.

  Then run checkdisk:

  Here's how to make a bootable xp recovery console cd

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Disk-Defragmenter-has-detected-that-CHKDSK-is/397271a9-2417-4261-8fc7-145678b6a876

  read the response of L. Elder

  It is easier to run from the recovery console as it will mean less restarts, but you can go to start, run, type CMD and press ok

  in the cmd prompt box type chkdsk c: r, and then press enter

  Type a y for Yes to run at the next reboot, and then press ENTER.

  Then restart your pc, allow checkdisk run and complete, if errors are found and fixed, then run again until no errors are found.

  You can view the report in the event viewer, Applications, Winlogon.

  After the last checkdisk you run, then check the most recent errors that are listed after the last checkdisk.

  How many are there now?

  Your reply message, please include the following information:

  current antivirus

  brand, model and model number

  Click Start > run > type or paste msinfo32 > OK. Copy and paste the content in your response.

• Drops network connection randomly, error message in Event Viewer ' TCP/IP NetBIOS Helper service was successfully sent a stop command, error code: 0 x 40030011.

  Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]

  I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...

  Hello

  1 have had any changes made on the computer before the show?
  2. do you have a wired or wireless network connection?
  3. do you get an error message? If Yes, what is the full and exact error message?

  If you use try Method 1 of the Wi - Fi connection.

  Method 1:
  Disable authentication IEEE 802. 1 X.
  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:
  (a) click Start, type ncpa.cpl, and then press enter.
  (b) with the right button of your wireless network connection and then click Properties.
  (c) click the wireless networks tab.
  (d) under preferred networks, click your wireless network, and then click Properties.
  (e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.

  Method 2:
  Try the procedure described in the link to create a new network profile.
  Create or modify network profiles
  http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

  Method 3:
  If the problem persists, you can try the procedure described in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4:
  If the problem persists, you can try to reset the Internet Protocol.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 5:
  If still the issue remains, control whether or not the service is set to automatic.

  (a) click Start and type services.msc in the search box.
  (b) search of the computer browser.
  (c) series the service to automatic.

  Steps to set the auto services

  a. Locate the service (computer browser)
  b. right-click on the service
  c. If the service is stopped , then Start the service
  d. Select Properties
  e. and in the Startup type , select Automatic.

  Hope this information is useful.

• I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

  I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

  Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

  You have a problem with a driver Atheros.

  It could be the network card is bad or the driver is damaged.

  If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Get the error in the event viewer that refers to Repultemtn. How to remove it?

  Original title: Repultemtn

  Every day I receive at least one error in Event Viewer-system that refers to Repultemtn:

  The Repultemtn service failed to start due to the following error:
  The system cannot find the specified file.
  The only trace I can find is the reference to a former pilot of Repultemtn in the registry. When I search online, I don't find any reference to this driver. Someone met by this old driver before?

  I have a last question. The reference to Repultemtn has now disappeared from current control set in the registry, but it is still listed in ControlSet004 and cannot be deleted. Should I be worried?

  Look at the key HKEY_LOCAL_MACHINE\SYSTEM\Select to see what the setting is, if it's a set of failed control, you can skip the whole game, if it's the LastKnownGood game it will be gone once you restart the computer.

  When you start Windows the bootstrapper checks the key HKLM\SYSTEM\Select to see which setting it should load, if 004 is a set of failed control will never be loaded again, if it's the LastKnownGood control set it will be charged only if you use the F8 advanced boot menu and select this option to start the computer to the last good known Configuration.

  After that you start the computer and successfully log on the LKGC is copied over from the set of controls that has been used to start the computer, these entries have been removed from the default (CurrentControlSet) If you restart the computer normally with the control set by default the LastKnownGood (which is a copy of the set of control kick successfully) can no longer contain the entries.  The LastKnownGood game should NEVER be modified manually... otherwise he will not be the same game as the one that was last with success started, that's why in most circumstances you must only change the current setting.  See here for more information about the boot process and control sets and the Select button:

  System and startup settings
  (Written for Windows 2000, but it is the same for Windows XP)

  John

• How can I remove all the errors and warnings Event Viewer administrative events, Application & system options?

  Please I need to remove these errors and warnings permanently on my computers?
  And please tell all the ways to get rid of these errors and warnings in Event Viewer... I'm waiting...

  You can clear the logs in the event viewer by going to the various sections, right-click and selecting "clear logs.

  What you can't do, is remove the event viewer or stop newspapers appearing again. It is part of the Windows 7 kernel and is useful to diagnose errors...

• Windows Error Reporting error re #1001 Event Viewer: MpTelemetry, MSE

  I am running Windows 7 Home premium 64-bit.  Get the Windows Error Reporting (information level) #1001-

  Log name: Application
  Source: Windows Error Reporting
  Date: 18/01/2011 10:52:08

  AM
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Joanne-PC
  Description:
  Bucket of error, type 0
  Name of the event: MpTelemetry
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 2152759308
  P2: unspecified
  P3: ScanFile
  P4: 2.1.6805.0
  P5: Microsoft Antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
  P6: unspecified
  P7: unspecified
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:
  C:\ProgramData\Microsoft\Windows

  \WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 48ee36c7-2323-11e0-90e7

  -002622f27952
  Display state: 4
  The event XML:
  <>

  xmlns = "http://schemas.microsoft.com."

  ' / Win/2004/08/Events/Event ">
   
      Reporting">
      <>

  Qualifiers = '0' > 1001
      4
      0

  0 x 80000000000000

  s >
      01-18T16:52:08.000000000Z">

  23730

  >
      Application
      Joanne-PC
     
   
   
     
     
      0
      MpTelemetry
      Not available
      0
      2152759308
      unspecified
      ScanFile
      2.1.6805.0
      Microsoft antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
      unspecified
      unspecified
     
     
     
     
     
     
     
     
      C:\ProgramData\Microsoft

  \Windows\WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a
     
     
      0
      48ee36c7-2323-11e0-90e7 -.

  002622f27952
      4
   
  

  I get these since I installed MSE this time on Windows 7 and also on my most old laptop with Vista.  I see that it is not critical, but I don't know what the problem is.  I have not found a problem when the MSE is scanning or protect my computer.

  Is this serious and I want to do something more?  If someone can tell me how to investigate this type of info in case the Viewer, I would be happy.

  Thanks for any help.

  Joanne

  Hi Joanne,
   
  You have any anti-virus or anti-malware to third party software installed with MSE (Microsoft Security Essentials)?
   
  I wouldn't think it's serious, but a mistake is a problem regardless of its gravity.
  However, I would like to you follow these steps and check to see if they help.
  Step 1:
   
  I would like you to put your computer in a clean boot State in order to eliminate any conflict of third party software causing the problem to occur. I suspect the involvement of a third-party software.
  Note: Please follow step 7 to your computer as usual after the test.
  Step 2:
  You can also Uninstall MSE and install version 2 of MSE and check if the problem persists.
  Note: Be sure to only install the version appropriate for your operating system
   
  See also:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Vista is not the right start, error message "problem event name: Startup repairV2.

  I recently got a game on Steam (GTAIV), but after that the match was my computer download was in place. I would have allowed a program through, thinking it was steam or game. I had a problem since then, now it is stuck on the beginning of initialization, it says I have errors:

  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailure

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:6

  Prob GIS 04:786444

  Prob Sig 05: Corruptvolume

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08:2

  Prob Sig 09: WrpRepair

  Prob GIS 10:87

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: D

  Same prob here is Looks like something is damaged

• Error in the Event Viewer system log

  Separated from this thread.

  Gerry,

  Thank you for your response.  It gives me a better understanding than the data stored on my computer that may be able to help me, and you have introduced me into a player.  I've posted the system log here and it includes hundreds of lines.  However I do not know how to make it visible to you.  I checked it to share and the only file that is serious is one that you brought me to download.  Although I have not found the answer to my problem, I found your advice gave me a better understanding about the tools that are available.  Maybe I'll get to understand how to use them.

  Ed Walsh

  Ed

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on the event viewer:

  http://www.gerryscomputertips.co.UK/syserrors5.htm

• When running scheduled report, receive error message "table or view does not exist.

  This is the first time that we play with the planning reports. We can schedule a report to base without problem, BUT when the report begins to call database packages it starts mistake. We found the package is called end but when it's a SQL query he does not know the scope of the table. For example if the code says "select * of per_all_people_f' he doesn't know what per_all_people_f. BUT if I change the code to specify the owner of the table ' select * from hr.per_all_people_f' then it will run successfully."
  
  In discoverer we have it set up so that a generic user db (DISCO_SCHEDULE) is used when running scheduled reports. I searched metalink and we run scripts of Oracles about this user setting. At this point, we think of creating a group of synonyms for tables of this error, but thought that it had to be a better way.
  
  Anyone have any ideas on how to solve this problem? Their a configuration step we missed when setting up the user db DISCO_SCHEDULE?
  
  Thanks in advance for any assistance received.
  
  Marty

  Hello

  Your problem is that you call the function hr_general.decode_person_name the DISCO_SCHEDULE user and like most HR packages, the package hr_general is defined with the current_user rights. Therefore, the package will use the privileges of the current user when the package is run.

  You can try to grant privileges to the tables to the DISCO_SCHEDULE user and creating the necessary synonyms, but you will struggle to get this working. HR packages refer to other packages and tables, and ensure that you have all the privileges that are put in place will be virtually impossible.

  Another approach is to create a view owned by APPS that makes calls to the hr_general package. You can also create a wrapper function which is owned by APPS and created with the copyright that calls the package hr_general. You can then call this package instead of using hr_general.

  Rod West

• DEFAULT DOWNLOAD EPG IN WINDOWS VISTA MEDIA CENTER ERROR ON ERROR CODE: MC EVENT VIEWER CODE 0 13.

  No not someone arrive at a viable solution for this yet? I had this problem for about 6 weeks and tried all of the solutions that I can find with no luck. I think that now it is linked to an update of Windows but which when I certainly don't know.  When I do a system clean reinstall the EPG download will temporarily (I did twice now) but after just a couple of updates and when Windows update has done been thing guide refused once more to download. How the world would be a person understand this because when I do reinstall the system there are about 150 updates waiting to download?

  Come on Microsoft Engineering people must certainly be a solution to this problem if anyone cares enough to explore the substantive issue. It seems that there are many, many others having the same problem.

  The old post of 2006 has an explanation detailed on the error code 13 and the same thing applies for Vista too, this is why I mentioned this one.

  I understand your frustration. The problem is essentially due to firewalls or things of internet security or antivirus interference.

  http://Forum.wegotserved.com/index.php?/topic/2676-guide-dowload-error-code-13-Vista-users came up with a solution. Does that help?

  Try the other suggestions too.

  S.Sengupta Media Center MVP

• List of ERRORS in the event viewer...

  Hello, could you explain to me, what should I do about it?
  All of these errors and warnings...

  Thank you.

  

  Yes, long closed downs, start-up newspaper very often!

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• Canon Easy-PhotoPrint EX gives errors in Event Viewer

  I just installed a Canon iP4850 printer and its associated software.

  When I start Canon Easy - PhotoPrint EX 3.20, I get the following error messages in Event Viewer:

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 34
  Description: Component identity found in manifest does not match the identity of the requested component.

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 58
  Description: Error of syntax in manifest or policy file "C:\Program Files\Canon\Easy-PhotoPrint EX\Microsoft.VC80.MFCLOC.MANIFEST" on line 5.

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 59
  Description: Generate activation context failed for C:\Program Files\Canon\Easy - EX\MFC80U PhotoPrint. DLL.
  Reference error message: the operation completed successfully.

  The application seems to run OK, but can you tell me what these error messages mean and how I can correct them.

  I contacted Canon who say that it is a Windows problem.

  CF. http://aumha.net/viewtopic.php?f=62&t=45395&p=240111#p240111

• Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

  Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.