WHAT I CEASED MY TOSHIBA POWER SAVER

Similar Questions

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• TOSHIBA Power Saver replaceable by SpeedSwitchXP?

  Hi people,

  as I've seen here in the forums a lot of users of Toshiba laptops has the problem of a noisy and often fan running. The Toshiba Power Saver 1.27.2.1 installed on my satellite M30X-167 seems to not have the feature of switching on the CPU to load dynamic processor.

  There SpeedswitchXP - CPU frequency for mobile control Windows XP on http://www.diefer.de/speedswitchxp/index.html

  Does anyone of you have a positive experience with the help of other register controls as the original from Toshiba?
  Doing dynamic CPU speed control significantly reduced the activities of fan?

  Best regards and greetings from the Germany
  Joerg

  Hi Joerg

  I had already installed on my Tecra M1. It worked fine, but I n t notice a big difference. Can you please tell me what laptop do you have?

  In my opinion, you can try to install it. On my unit SpeedSwitch works properly without any problem, but AFAIK the tools as it works well on laptop computer desktop map mother don t allow this tool may have information on the temperature or things like that.

  As I said you can try it.

• Toshiba power saver disappeared completely

  Hello

  My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
  This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
  I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

  .. masse be nice if someone could help me.

  Ciao, Christoph

  Hi Christoph,

  You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

  If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

  HTH

• Tecra M5 - Toshiba Power Saver did not do his job properly

  Hello

  After looking for a tool to silence my Tecra M5 awhile, I found an apparently nice application called Toshiba Power Saver. Unfortunately this tool doesn't seem to work properly. I played with the [slider cooling method | http://img200.imageshack.us/img200/8008/powersaver.jpg] (click to see a picture) and here's how it works.

  The cooling method can be set to one of four options: battery optimized Performance, maximum Performance and cooling optimized, where one is supposed to be the quietest, and those of other more noisy.

  Assume that the cpu fan spins at high speed at the start and I do not have anything on my laptop. I move the cursor to the battery optimized setting, click on apply and the fan (instantly) slows down (yay!). Then I need to do something about hunger for a while and finally the fan turns up the noisy power level. I then doing nothing of the brand-new, but the fan is like that * ever *. The processor is as cold as ice, the air is blown could freeze the fingers, but the fan spins like crazy to wake up my neighbours on the road.

  I'm really sure that the cpu is cool? Yes. Why?
  Because when I move the slider for Performance affecting now and click on apply the fan slows down (right) and remains like that until I start working on something new. Then I stop doing what I was doing and the continuous spinning fan * ever * once again.

  So I change the method of cooling for battery optimized setting back again once, click on apply and the fan slows down... and so on and so forth, stuck in a vicious circle.

  The key to success here is keep pressing the button apply, which the Power Saver application should do from time to time and not me and not forgetting what it is here for.

  What is the problem with this app? Is there a fix available (or alternative)?
  The version I have is 7.11 and runs on XP Pro SP3.

  Hello

  What about your ad here?

  TOSHIBA Power saver is tool Toshiba use for years and it is preinstalled on 98% of all models of Toshiba laptops. So, in my opinion, this tool is certainly one of the best and most effective tool designed by Toshiba.

  Over the last 10 years, I have worked with many Toshiba laptops and I used this tool on each laptop to optimize my work. Mix between the good performance of the processor and method of cooling level offers enough power for each working day and with a low level in the method of cooling laptop runs pretty quiet.

  Maybe stupid sounds now, but I have noticed that the Portege notebooks are, perhaps, more sensitive and using tool electric saver you cannot have the same effect as on certain portable Satellite and Tecra.

  I do not think that this tool doesn't work properly on your Portege but Portege laptops have a specific design and material may reach a higher temperature faster than on the other laptop models.
  Portege laptops have excellent and powerful material packed in a box of small notebook.
  Sometimes laptop runs quiet and if you just connect the USB mouse the cooling fan starts to run strong enough. A small business can speed up physical activity and if temperature sensors have noticed a higher temperature for a degree C only, the fan control mechanism get information starts to cool the fan turns.

  It is really not easy to tell if there is something wrong or right. My personal opinion is that everything is OK. You can try to talk with the service of Toshiba. Call them and ask for explanations. They should have enough experience with this stuff.

  In any case, good luck!

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Re: Toshiba Power Saver fatal error. Code 0 x 0

  Hi all

  I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

  It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

  I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

  I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

  Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

  Thanks in advance.

  Raymond

  You must delete it from the registry.

  Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

  Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

  PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

• Satellite A500-1GL - version of last Toshiba power saver

  The guy with the A500-1GL, please, tell me what version of Toshiba Power Saver do you currently have? It is displayed in the menu of advanced power settings.

  I ask, because, I suppose, that GST of the toshiba .eu site is pretty old and my laptop came with a newer version. Am I wrong?

  Hey,.

  Why the version is so important to you?
  Important thing is that everything is working properly and portable saves energy if she runs with low CPU utilization.

  What operating system do you have exactly?
  If you use Windows 7 or Vista, Power Saver is a part of the package of added value.

• Satellite M60: How to uninstall Toshiba Power Saver

  Anyone know how to uninstall the Toshiba Power Saver driver manually (so that should not be able to perform a clean installation of Windows)? There is no automated uninstall for the GST driver (should not be confused with the Toshiba Power Saver that can be uninstalled without problem).
  Note: the recovery CD is not an option here, because the pilot of the GST is included.

  I want to do this to check if this is the thing that messes the keyboard or not (see posts on M60 keyboard problem). I just wanted to check on a new Sat P100 which has a similar keyboard, but guess what... the GST is not enclosed with it.

  You guessed it, the keyboard problem has not resolved the Toshiba service representative.

  Hi Sammo

  Unfortunately I have no solution, how to remove the GST driver but it will be interesting to know how it works after installing the full version of Microsoft WXP. If you do a few tests please let us know.

• Meassage error (Toshiba Power Saver)

  When the computer starts it is meassage (toshiba power save) a fatal error has accurred this program will be terminted code 0 x 0
  What is the proplem please?

  Hello

  It will be very interesting to know what type of laptop do you and which version of Power Saver is running on the device.

  Good bye

• TOSHIBA Power Saver Equium L20-198

  Hello

  I have an Equium L20-198. When I click on the toshiba power saver icon in the Control Panel, it says "cannot open as the toshiba power saver does not work, go to power options, toshiba power saver, select power schema list box in page scheme of power." But toshiba power saver is already selected in the schema of power section. I'm confused.

  What is an ati graphics accelerator? It seems that every time I turn on my computer. It is said that an ati Graphics Accelerator can use a TV to my computer display. It is recommended to use a TV to display my computer, I'll have to make sure your TV display is enabled, if I do not use the TV to display my computer, I have disable for optimal performance (higher discount rate). What should I do?

  Post edited by: sa008

  Hello

  I wonder about your message
  Why?
  because the Toshiba Power Saver was not preinstalled on Equium L20.
  A Toshiba power saver doesn t exist for the L20 series!
  There is nothing on the page of the Toshiba driver too

  Therefore, the GST will not work on this laptop!

• Satellite Pro M70 - cannot install the Driver of Toshiba Power Saver

  Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?

  My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?

  Sorry for the English and thx for answer

  I think that you should not install this driver, the only saving electricity only.
  What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
  Some batteries perform well after 3 years of use, and some of them are dead after only a year.

• Portege S100: How to restore the system TOSHIBA Power Saver setting

  When I had to test my battery and created a new setting of power on my laptop, I accidentally deleted the default schema TOSHIBA Power Saver of my those listed on my utility on Control Panel Power Options.

  I tried to restore the Toshiba utility, by recreating a power scheme called "TOSHIBA Power Saver" - but Power Options says that there is already a framework plan of the same name.

  When I start the laptop, I get an error message saying that the TOSHIBA Power Saver utility has experienced a fatal problem and he has completed the program.

  Can anyone advise me on what I do:

  -restore default TOSHIBA Power Saver setting.
  -stop the runtime error occur
  -put things the way they were back.

  Thank you very much

  Seems so ;(
  I would recommend the recovery CD because the whole procedure takes about 10 minutes only.

  But don't forget to save your data if it's important.