Error "Not a PDM leader"

Similar Questions

• After an update, I get error "not responding." and then began to hang at startup; uninstalled and reinstalled still hangs at startup

  After you apply a systematic update on Windows XP, I started having "not responding" to stop and had to cancel the task through the Task Manager. The error "not responding" moved to the selection of items on a screen and had to cancel via the Task Manager. I applied the updates and that did not fix the problem. The last update was 34.0.5 and FireFox would not start up. I noticed several people also had this same problem with Windows 7 (although my Windows 7 works ok - touch wood).

  34.0.5 upward in safe mode but would not come otherwise. I did a Reset and FireFox started with Extensions disabled. The first expansion, I have activated was Norton 2014 Toolbar and FireFox did not come to the top. After application of all available newly INDEPENDENT States fixed, FireFox came upward with the NIS active 2014 and seems to operate normally in the present tense.

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

• RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)

  HI, I am unable to solve this help please me...

  RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)
  By these Services on the server are not begin in 2008r2

  
  (1) group policy

  (2) Service Control Manager

  (3) the Client DNS events

  (4) browser

  (5) Kerberos security

  All the above services do not solve & due to this FSMO roles are
  not work & unable repeated files.

  Please help me on this point, it's to create a big problem for me here.

  Hi Varun,

  I suggest that you post this question in the Windows Server 2008 support TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Visual Foxpro Professional error: "not enough memory".

  AFTER THAT I INSTALLED VISUAL FOXPRO PROFESSIONAL VER 3.0 ERROR NOT ENOUGH MEMORY WHEN I SPEAR VFP

  Original title:

  After I installed Visual Foxpro Professional I get "Out of memory" when I when I run.

  Hello

  After you have installed microsoft visual foxpro 3.0 on my windows xp pro service pack 2 computer it was successful but when I run the program (visual foxpro 3.0), it won't work and it says insufficient memory.
  pls help...

  TNX

  Danny

  Hey Danny,

  You can see the steps from the following link and check if it works:
  FIX: Out of memory in Visual FoxPro on fast computers
  http://support.Microsoft.com/kb/179287
  You can also consult the following link:
  Troubleshooting memory errors
  http://support.Microsoft.com/kb/112676

  Let us know if it helps!

• What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  Hi Jerome,

  ·         You receive the error when you try to print?

  If so, check to see if the following helps you.

  Run the next Fixit tool to check the issue.

  Problems printing and printing errors

  If this isn't what you are looking for then respond with more information so that we can help you best.

• QtCore4.dll error not found messages prevents me to open certain programs.

  I can't open some programs, specifically Photoshop Elements 6.0 due the QtCore4.dll error not found messages.

  I can't open some programs, specifically Photoshop Elements 6.0 due the QtCore4.dll error not found messages.

  QTCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.  It may have been deleted by a too aggressive antivirus application.

  Search your hard drive for QT4Core.  If you find QT4Core.dll, copy it to C:\Windows\system32. If you can't find it on your hard drive, it may be in the elements install files, where they (CD?) like QT4Core.dl_, in which case you will need to use the Expand command in a command prompt window:

  Expand D:/path/qt4core.dl_ c:/windows/system32

  where "D:/path is the letter of the CD drive and the path to the qt4core.dll_.

  Or just reinstall Photoshop Elements and the file should be included in reinstall it.

• Application error "not enough of space for the environment" in Vista.

  Could not find the right answers out there for this problem. Application error "not enough of space for the environment '. I am running Windows Vista Home Premium. Thanks for your help!

  I suggest you try compatibility mode.
  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Let us know if that helps.

  Marilyn

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• Could not locate the component error, not found MSVCRT10.dll,

  trying to bring to the top of Photoshop CS3 after reinstalling because of a factory reset on my computer, receive a "unable to locate component error" not found MSVCRT10.dll, but this file is located in the file C:\Program (x 86) \Adobe\Adobe Photoshop CS3\Plug-Ins.  What should I do now?

  Hello

  Photoshop CS or third-party plug-ins remove of Photoshop CS3/Plug-ins folder.

  1. remove all third-party plug-ins designed in the folder of Photoshop CS3/Plug-Ins for Photoshop CS and Photoshop CS.

  2. If you have set the plug-ins folder of Photoshop CS as an additional plug-ins folder in Photoshop CS3, choose the command Edition > Preferences > Plug-Ins and scratch disks and do one of the following:

  -Uncheck the option of additional Plug-Ins folder.

  -Click on select, then select a folder that contains no third party plug-ins designed for Photoshop CS or Photoshop CS plug-ins.

  If the problem persists after the question in the Adobe Photoshop forums.
  http://forums.Adobe.com/community/Photoshop/photoshop_windows?view=discussions

• Try to open the .pub file - get error not valid Win 32 application

  Try to open the .pub file - get error, not a valid Win 32 application

  Help, please

  Thanks for your suggestions.  I have both Publisher and InDesign.  I was able to open this type in the past using Publisher. ???

  Hey bets4jandj

  It helps when you provide in your first post information about what programs you have pertaining to your problem

  Make sure that they have all of the defaults and set file associations correctly

  read the information below about

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  Walter, the time zone traveller

• Error: Not a Winsock error

  I'm trying to update a program which is a bit old, using its "web grab updater" when I do, I get the message:

  Error: Not a Winsock error

  is there a way to get this thing to update or a fix available?

  Hello

  What changes have been made on your computer before this problem?

  What is the program that you are referring to here?

  I recommend uninstalling and reinstalling the program and then try to update. Since the issue is with a third-party program, I would recommend you to contact publishers and check what they have to say about this error message.

  Let us know if this helps

  Concerning
  Anthony

• How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  for just cause 2
  Please answer me before Monday

  If DirectX is up to date - you have a Direct X 10 graphics card? Just Cause 2 does not work on Direct X 9 graphics cards (perhaps the only game so far that will not use DX9) or Windows XP.

  The game should have reinstalled Direct X as the game has been installed. There is a folder for Direct X in Just Cause 2
  installation folder in your steam apps folder / Common. You could try to run the DXSETUP.exe from there.

  You can also use Windows Live X Web install-
  Download details: DirectX end-user performance

  It is useful to always include as much detail as possible when you ask a question, including the specifications of your system (not a great long DX diag, just a list of the main components - processor,)
  graphics card and the amount of RAM is quite generally).

• Error: Not yet registered to request debugging tokens

  "I wrote my small and simple application in HTML5 and bundled with the ripple (with 1 WebWorks) emulator (without signature), but after trying to install the .bar through DDPB file it gave me the error ' 881 found no debugging token. Now, previously, I had already a debugging token on my Z10, but as the nube I'm kidnapped by accident. Now, while trying to recreate the debugging token, I encountered error in cmd, ' error: not yet registered to request debugging tokens. I have an author.p12 file, a barsigner.db file and a bbidtoken.csk file that I had tried to help out, I'm getting lost in all the documentation which has provided Blackberry and probably have 1 million junk files, could someone please help me get back on track.

  Sorry for the nube-nish, I'm only 13...

  WebWorks 1.0 will not support BBID approach to signature, if you go this route you will need to request a new set of files of the LSB of the code signing the form here:
  https://www.BlackBerry.com/SignedKeys/Codesigning.html

  When you ask for the keys, don't forget to check this box:
  For BlackBerry PlayBook apps or BlackBerry 10 apps development SDK lower or average of a 10.1 or BlackBerry 10 SDK WebWorks less than 2.0.

  In an hour or two, you will receive two files CSJ. Before you begin installation, ensure that the directory that houses your key is empty (records can stay.) I recommend to copy all existing files in a folder "backup" just in case, but don't want any old CSK, DB, etc. of generated files cluttering it. If you do not know what directory, check the "files backup" section here that lists the directories.
  https://developer.BlackBerry.com/HTML5/documentation/v1_0/signing_setup.html

  Once emptied, you can use the steps in this URL (top of page) to save your CFS files. Essentially, by running the command of blackberry-signatory to record your keys.

  Once this is done, you should be able to generate debugging tokens and others. The important part is to no BBID and mixture LSB file, and does not support this WebWorks BBID 1.0.

• nlsdl.amd64.exe error 'not enough memory is available to process this command. "

  Hello

  Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."

  I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.

  What can I do to solve this problem and continue on this tutorial?

  Here's what I'm working with on professional W7 X 64.

  Add the Support of Board multilingual user in an Application

  Microsoft National Language Support returned APIs 1.0

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home