Error: Not enough access privileges
Try to add a video that is in the correct format for my itunes library, but I get this message "attempt to copy to disk"OS"failedd. You have enough access privileges for this operation. I am logged in as administrator. What should I do?
You add with permission of right and property (including all files and subdirectories) for the folder music in your profile, and regardless of the folder allows you to store your iTunes library. Make sure that do you on key issues. Do on the tab page main secirity and also if necessary in the special permissions under Advanced section (where you can find the property tab). Make sure that everyone is not seen to refuse approval of anywhere (if so, change it to allow and give read-only access). See if that solves the problem. Unlike XP, being an administrator in Vista gives you unlimited access to everything - there are a lot of restrictions.
Here is some additional information about permissions and ownership that can help if you are having problems or need help with specific procedures:
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Cannot be stored in itunes, not enough access privileges for this operation
Download the message saying that itunes cannot be saved. not enough access privileges for this operation
Ask the question in the Apple Forums:
https://discussions.Apple.com/index.jspa -
Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?
You are not allowed to write to the specified folder.
CHEK your access privileges.
Also: in case you save to a network: do not.
Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.
If you need additional assistance, please we say system and version of Illustrator and where you want to save.
-
I have just designed hang tags and you want to save the file, but continue to receive the error message when I try to save. "Cannot save you don't have enough access privileges"? Help please
Try changing the location you're trying to save in.
-
I use a mac and when I try to save a file I get this message. Unable to save the image. Do not have enough access privileges. -5000
local disk, I think he was trying to save it in the templates folder. I changed it to save it on my counter top and it worked. Rookie mistake. This had to be the problem.
Thank you
-
I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?
Hello
Please follow the steps from the link below.
Appropriating a file or a folder
http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
Also check out the links below.
Encrypt or decrypt a file or folder
http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file
Recover encrypted files or folders
http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders
Import or export certificates and private keys
http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys
-
Visual Foxpro Professional error: "not enough memory".
AFTER THAT I INSTALLED VISUAL FOXPRO PROFESSIONAL VER 3.0 ERROR NOT ENOUGH MEMORY WHEN I SPEAR VFPOriginal title:
After I installed Visual Foxpro Professional I get "Out of memory" when I when I run.
Hello
After you have installed microsoft visual foxpro 3.0 on my windows xp pro service pack 2 computer it was successful but when I run the program (visual foxpro 3.0), it won't work and it says insufficient memory.
pls help...TNX
Danny
Hey Danny,
You can see the steps from the following link and check if it works:
FIX: Out of memory in Visual FoxPro on fast computers
http://support.Microsoft.com/kb/179287
You can also consult the following link:
Troubleshooting memory errors
http://support.Microsoft.com/kb/112676Let us know if it helps!
-
What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.
Hi Jerome,
· You receive the error when you try to print?
If so, check to see if the following helps you.
Run the next Fixit tool to check the issue.
Problems printing and printing errors
If this isn't what you are looking for then respond with more information so that we can help you best.
-
Application error "not enough of space for the environment" in Vista.
Could not find the right answers out there for this problem. Application error "not enough of space for the environment '. I am running Windows Vista Home Premium. Thanks for your help!
I suggest you try compatibility mode.
If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.
If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.
Let us know if that helps.
Marilyn
-
Hello
Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."
I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.
What can I do to solve this problem and continue on this tutorial?
Here's what I'm working with on professional W7 X 64.
Add the Support of Board multilingual user in an Application
Microsoft National Language Support returned APIs 1.0
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
vSphere Host Update Utility - ERROR: not enough space on the boot partition
I get the following error when I run the host update utility
ERROR: Not enough space on the boot partition
The boot partition doesn't have enough space to store initrd.img.
Expected free space (MB): 50, found: 44
I can free until you reach the required amount?
Send the output of this command:
DF h
And the version of ESX 3.x
See also this KB (there are a few tips on where space can be lost):
http://KB.VMware.com/kb/1016511
André
-
So, about a week before I did a fresh 64-bit Windows 7 ultimate on a new PC and installation subscribed to the Adobe Creative Cloud, After Effects CS6 and Photoshop CS6 of Adobe Application Manager installation, then all updates made (and I just checked right now at 22:35 on 26 July, I have the latest version of everything).
After effects was working at normal, and then later, I tried to import a .psd Photoshop and I got the error message:
After effects error: not enough memory to initialize the PSL.
(83: 8)
Then After Effects crashed. So now he opens normally, but when I try to import a .psd or open an After Effects project registered an earlier version of After Effects (CS3 to CS5) I get the same error and an accident, every time.
The research forums, I see people talking about this error when you import .psds in CS5, and they say that to get the latest updates solved the problem for them (which obviously cannot help me). I use all legitimate software on a computer brand new with 32 GB of RAM, who has passed all my tests of physical stress, so I know it's not hardware related.
The only thing that I've seen people suggest is pressed Ctrl-Alt-shift to the launch of the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the old AE files. When I close After Effects and reopen it without hold down Ctrl-Alt-Shift keys, it goes immediately to crashing.
Of course chip-* answer is ' then hold down Ctrl-Alt-Shift, dummy "and I'll do it for now, but is there any idea what is the problem?
I feel like kind of a stupid because I decided to stop using my versions student software Adobe (I was not a student for about four years) and pay the full price for the composition of the cloud and the latest creative suite, and it is full of bugs.
Hello
If on the windows machine, make sure that the system temp/tmp environment variables point to % USERPROFILE%\AppData\Local\Temp, if it's in a different location, you will experience crashes in various programs of Production Premium (bridge, prelude), not able to import a psd in first or AE, photoshop gives a strange on swapfile error as it tries to open it on the root of C :. You can run individual programs high, although will not work with dynamic link between programs like body/AE.
It will be useful.
-
Network access error: not enough server storage is available to process this command
Hello
I can't access the other computers on my network neighborhood.
If I try to use \\computer\d$ running, I get "not enough server storage is available to process this command."I look in the case of newspapers and I have an error: "{the browser service has failed retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{97851F92-8FAC-4FB2-A6C9-CAB1B0FE6593}." The secondary Explorer stops. »
I enjoyed all the ideas. I hope I don't have to reinstall the system (Windows Vista Business 32 bit)
Dan
I'm glad that you got this sorting. You were one of the rare cases where there was not enough space on a hard drive. Generally, the "not enough space" is misleading. In all cases, it is good to know things work now. Thank you for taking the time to let us know. MS - MVP - Elephant Boy computers - don't panic!
-
Hello
Difficulty of the access privileges on your USB. It is locked or you simply don't have the right to write about it. No application can write on it.
BTW: it is not a good idea to read or write from a USB key in Illustrator (or any software) directly. These sticks are just a nightmare in terms of data integrity and tend to become too often mistakes of R/W.
Save on your drive hard and then make a copy on the USB key.
-
Problems with word and PDF after computer crash. Error "user has access privileges."
Problems with word and PDF after crash
My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example. I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do? Please help because I can't open some of my documents from the University.
Hello world
I would like to just say thank you for your help and the problem is now solved. In the end I paid someone to sort it out. He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost. He told me that he had a program that looked for the old existing and re-installed.
Thank you.
Maybe you are looking for
-
Re: On Satellite U400 Bluetooth does not work with windows 7
Hello I have no model of Toshiba laptop U serious (satellite U400 - 10 L): PSU40E-00F00WAR) is XP OS. but I change to windows 7Since bluetooth does not I tried all the driver but not of their work can someone help me? Thank youBest regards Post edite
-
The text is too large for my screen
The text is too big for my new monitor Samsung (22A300B); How can I reduce the size of the text for all of the text is adapted to the screen? My list of contacts (including addresses) 1/3 of m's reliever; y right screen. How can I display the list of
-
I can't run any games that use DirectX
Hello. Before I tell you my problem I will give you some basic information. My other laptop broke, so now I'm currently using an old Windows Vista laptop I had. This laptop really got destroyed by a Rootkit (I have since found and deleted, has also c
-
Need help on the parameters v1 WRT160N
Recently upgraded to the higher speed package from comcast, but haven't seen any increase in speed for wireless connections. Firm ware upgrade and then downloaded the user manual to go with the default wireless settings. And it ran very slow. Paid
-
map of scsi (redirect) dell poweredge 1950
Hello world I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape dri