ERROR: Not supported format the disk (VMDK sparse invalid header)

Similar Questions

• External hard drive not detected with the error: "You must format the disk in the J: drive until you can use it."

  Hello

  I have an external hard drive to work perfectly. I'm back from vacation, and it does not appear under "My Computer". It appears under "Devices and printers", however. This is a link to a screencap of Device Manager: http://i.gyazo.com/9e91e1d71ed32c55dba0419e79b499d5.png

  The device in question is that of J:, and it says here that he has 100% free space, that worries me, because he had only 50 GB of free space when I used the latter. After that I open the disk management, I get a pop up message saying: "You must format the disk in the J: drive until you can use it."

  How can I get my hard drive appears again?

  Thank you

  Original title: external hard drive not appearing is not in Windows 7

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the error message, I suggest trying the suggestions posted by the NakulShridhar responded on 14 October 2011 and by that alexquiteguy replied on 13 January 2011 in the thread following link and check if it helps.

  "You must format the disk in drive J: before you can use it"

  [Steps apply to Windows 7]

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• My HDD shows this error: "you must format the disk in the M: drive, until you can use it. You want to format? »

  My HDD shows this error: you need to format the disk in drive M: until you can use it. Format you? 
  Please help me! the hard drive is like my life...
  That's the reason of my existence...
  I need in the data and that i will do everything I have to please :/ someone help me
  Please helpppp!

  Original title: WD hard drive problem! Desperately need help. Please

  Hi Arman,

  Thanks for posting your query in Microsoft Community.

  I would say you can remove the drive letter M: using disk management and assign a different drive for the drive letter and check if it helps you to solve the problem and if the drive works very well.

  To change the drive letter in disk management follow the steps below:

  a. open computer by clicking the Start> Control Panel > system and security> Administrative Tools > computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  c. click the drive that you want to change and then click change drive letter and paths.

  d. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  In addition, please refer to the steps posted by NakulShridhar responded on October 14, 2011 in the following thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/you-need-to-format-the-disk-in-drive-j-before-you/4e153784-3217-4425-9c39-48030af82a13

  Warning:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• VMkernel journal peripheral qualifier suggests 0 x 1 errors not supported for the MD3000i railways

  I have a vSphere cluster connected to the MD3000i and its configured by the book on two different subnets for each port on each controller. Robin is enabled for multi pahing on VC.

  That's what I see in newspaper vmkernel

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C0:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 842: Path "vmhba33:C0:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.613 cpu4:6882) ScsiScan: 105: path 'vmhba33:C0:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C1:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 842: Path "vmhba33:C1:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.618 cpu4:6882) ScsiScan: 105: path 'vmhba33:C1:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C2:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 842: Path "vmhba33:C2:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.623 cpu4:6882) ScsiScan: 105: path 'vmhba33:C2:T0:L0': peripheral qualifier 0 x 1 not supported

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 839: Path 'vmhba33:C3:T0:L0': seller: "DELL" model: Rev 'MD3000i': '0735' "»

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 842: Path "vmhba33:C3:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  21 sep 16:19:29 db-esx2 vmkernel: 6:04:15:02.628 cpu4:6882) ScsiScan: 105: path 'vmhba33:C3:T0:L0': peripheral qualifier 0 x 1 not supported

  I see this on the two hosts vmkernel journal...

  should I be worried. "This isn't necesserely showing error but:" device qualifier 0 x 1 not supported "gets my attention.

  If you have NOT of LUNS assigned as Lun0 then you will get this error.   So always start with LUN Lun0 aka: Lun0 - first record entrust you, Lun1 - second disc etc.  You have not neccessarly to reallocate your currently lun, you could create a new lun and presenting it as Lun 0.     So try that if you are able to create a new Lun.   Otherwise if you have existing virtual machines running on the current Lun5 you would have to stop them, being cancelled at them in inventory, change the Monday from 5 to 0 and then re-record their I think.    Also, make sure that you do not jump also any number of LUNs... aka go Lun0, Lun1 and Lun2 Lun3 etc.

• Cannot display a .avi file in Premiere Pro CS6. We get an error "not supported format or corrupted file.

  I am trying to bring three distinct animations in Premiere Pro, but it won't shoot them in the Source window or timeline of the sequence. The three files are uncompressed .avi files that were returned on in Autodesk Inventor. They are 15 second clips, around 2 GB and 40 fps. I can play them in Windows Media Player without problem. Any ideas on where to start troubleshooting? I can't imagine it's a codec issue, if the files are unzipped?

  Edit: I used MediaInfo to get the info on the video.

  General

  Full name: E:\Videos\13-1011 LAGCOE LED Billboard Video\1250 Drill Pipe elevator Video.avi

  Format                                   : AVI

  Format/Info: Audio Video Interleave

  File size: 2.06 GiB

  Duration: 15s 25ms

  Overall bit rate: 1 180 Mbps

  Video

  ID                                       : 0

  Format                                   : RGB

  Codec ID: 0x00000000

  Identifier of the codec/Info: Basic Windows bitmap format. 1, 4 and 8 bpp versions are palettised. 16, 24 and 32bpp contain raw RGB samples

  Duration: 15s 25ms

  Bit rate: 1 133 Mbps

  Width: 1 280 pixels

  Height: 960 pixels

  Display aspect ratio: 4:3

  Rate: 40,000 fps

  Color depth: 8 bit

  /(pixel*Frame) bits: 23.050

  Stream size: 1.98 Gio (96%)

  > can't imagine it's a codec problem

  Imagine still once your screen printing said they are bitmap files... IE a string of images, not 'really' a video that the Organization recognizes... and a rate of 40 FPS is also "weird".

  Autodesk has other options... to create a file with a 'true' video output codec?

  Because the Assembly is not the same thing as play, you may need to find a codec to be installed to be able to edit (NOT a codec pack!)

  Autodesk has a place where you can download and install 'their' codec to edit files?

• Error - exception error not supported for user - Help!

  Hi all

  I get an exception error unsupported to the user in a part of my page is refreshed after encountering a validation error.  Validation is managed properly, but when the page is refreshed to display I get an exception error not support for the user for the following code (generates the value of the element on the page):

  < code >

  Select nvl (sum (po_details.po_det_amt), 0)

  of po_details

  where po_details.po_id =: P230_PO_ID

  and po_details.wbs in (select distinct wbs_number_id of wbs, project

  where wbs.vendor_id =: P230_VENDOR

  and substr (wbs.wbs_number_id, 1, 6) = project.wbs_sequence

  and project.project_number = nvl (:F101_FPC_NUMBER,project.project_number));

  < code >

  When the code retrieves a single value, the following post calculation calculation of:

  < code >

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  < code >

  Generally, the process works.  It is only when a validation run which prevents the removal of a purchase order that I encounter an error during a refresh of the page.  I get an exception error unsupported to the user for this calculation.  I'm puzzled.

  Any ideas?

  to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

  AFAIK - all within the APEX bind variables are of type VARCHAR2

  That means - you are implicitly expressing a string to a different data type just to cast to a string.

  So: this code is completely useless and adds more complication to the mix only what you need.

  It is very possible that Oracle is trying to convert a DATE... (which will fail)

  I put either the FORMAT for the type of element to match what you need or make the conversion from the string in your SELECT statement.

  for example

  Select to_char (nvl (sum (...), 0), "FML999G999G999G999G990D00")

  If you still get a 'user defined error', it is likely to be lifted since within the procedure used to remove the PO.

  See the DEBUGGING within the APEX pages to check exactly where the error is thrown.

  (it sounded like you already did and have reduced in to_char() section)

  MK

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• Adding disk IDE of addition is not supported at the moment

  Hello

  While I'm trying to add a disk to a new virtual machine, it gives and error "adding existing IDE disk is not supported at the moment." IDE drives cannot be added hot or there is no available free IDE controller locations.

  Note: The disk is question is not attached to a virtual machine and on the other hand, we are able to add another disk to the new virtual machine.

  Any ideas?

  This is exactly why I figured out too. Sorry I have not post on this thread right now also, as I've done here:

  http://communities.VMware.com/thread/235718

  Lars

• CS4 won't open the files to an external hard drive. "not supported format or corrupted file?

  Hello

  I'm having a certain hard using first but the passage between different computers.

  So I created a project on another computer, in which I put the video files that are located on my hard drive (external). I saved the project on the same hard disk. Realization of my project, I noticed that creates the first "preview files" in a separate card.

  I got a new computer in which I put the 2 GB of ram necessary for myself so I could work at home. BUT when I connected my HD on my computer and tried to open the project, the computer said one of the preview files were missing. No big surprise, so I'm going and find the file. Click on it, but then it says:

  "not supported format or corrupted file", which is absolutely B * llshit because the Prime Minister created the file itself?

  In addition, all media, I imported in the left part of the screen of the user (not sure what you call) IS 'off CONNECTION '. It gets weird, because when I try to find the media using FIND in first, not all the files SHOW UP?

  Im getting quite nervous, because I need it to work hard enough

  Maybe its helpful to mention that my new computer is a complete novice blown [no internet connection, does not sound again: I just installed Service Pack 2] and maybe I'm missing some drivers?

  Please, please help me I'm wasting enough it actually...

  Thank you

  Jef

  Jef,

  Open the CS4. Create a new project and when you get the sequence settings screen, are selectable AVCHD, HDV, and XDCAM presets?

  If this isn't the case, you are using the trial version, or your full version has been restored to the status of the trial. The trial does not support anything MPEG, even when encapsulated in AVI format.

  If you have the full version which is returned to the status of first instance, follow these steps:

  1. disable

  2 uninstall

  3. run the Script own CS4

  4 reboot

  5. Repeat steps 3 and 4

  6. Repeat steps 3 and 4

  7 install

  8 activate

  9. turn to update to 4.2.1

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.