Apex are not related to the user of the application of the law

Similar Questions

• Custom Quiz with master Widget are not related to the LMS (Captivate 5.5)

  Hello

  I wrote a quiz with partial credit and, in order to make answers, I use the master Widget. (A big thanks to Lilybiri and Infosemantics for all the advice I found in blogs and learning classes!)

  In summary, the quiz is composed of 2 questions with 4 possible answers.  Each of the 4 answers have a different score attached to it (i.e. to answer a = 4 points; Answer b = 3 points answer c = 2 points; Answer d = 1 point).   On each slide of the question, I have added a Master Widget (using the variable representative points the student received as a slave).  I want the quiz to report the score for each question.   After the student has answered these two question slides, they continue to a slide 'results '.  Here, they consider the total of their scores and get your comments on if their total is high, too low or online.  On the results page, I used the master Widget itself to make the quiz on the total score.

  I downloaded this quiz as a package SCORM 2.3 Moodle and Blackboard 9 (we are different systems LMS to test).  The short quiz in each LMS, but when I try to access a report, I get no results: no report received for each item quiz and no total score points.  Indeed, in the table, I get a blank page:

  

  In Moodle, I get:

  

  Here's what to look like my quiz preferences:

  

  I'm really stuck.  I realized there are many components to this process and I really need help to find out where the problem lies.

  Thank you for your time and help!

  Bray,

  Yes the numbers on the slide of questionnaire results are important because they indicate that some of your widgets or other interactive objects are not reported to the "official" quiz score

  You must go back and check the objects you want to appear in the score.  The score of 67% reported by the quiz on the quiz results slide probably means that Captivate think you have only three objects within the quiz and only two of these (two-thirds or 67% in round numbers).

  You mentioned before that you have three Master widgets in this project.  How many of them can be found in the report for the quiz?  To check if they are all considered to be successes, turn on Success and Failure subtitles for these widgets, and then run through your interaction.

  When you use a Slave to Variables with the master of widgets for partial credit, remember that even if the captain widgets can account for these variables as being interactive objects, Captivate does not work.

  Although the captain widget is VERY powerful, it also tends to mess with minds, because there are SO many ways you can configure. If you use partial credit, check if you have the option to bypass the assigned score own widgets with the total score of points from the slave value objects.  If you use this option, you must ensure that at no time can the substituted score not fall within the range 0-100% compatible SCORM LMS will accept.

• Error of FK constraint on update for areas not related to the

  I'm an integrity ORA-02292 constraint violation when you try to update a table that has a FK to another table constraint. The areas that I update are not fields that have attached constraint. Here is the SQL script to reproduce the problem.
  
  DROP TABLE PERMIT_EXT;
  DROP TABLE PERMIT_EXT_INSPECTIONS;
  PERMIT_EXT_ID SEQUENCE OF FALL;
  
  CREATE TABLE 'PERMIT_EXT '.
  (
  'ID' NUMBER (9.0) PRIMARY KEY,.
  'THE AGENCY' VARCHAR2 (10 BYTE) NOT NULL ACTIVATE.
  ACTIVATE THE "PERMITID" VARCHAR2 (20 BYTE) NOT NULL,
  ACTIVATE THE "TITLE" VARCHAR2 (100 BYTE) NOT NULL,
  "PERMIT_EXT_AGENCYID" UNIQUE CONSTRAINT ('THE AGENCY', 'PERMITID')
  )
  ;
  
  CREATE THE SEQUENCE "PERMIT_EXT_ID" MINVALUE MAXVALUE 1 999999999 INCREMENT OF 1 START WITH 1 NOCACHE ALL NOCYCLE.
  
  CREATE OR REPLACE TRIGGER "ON_INS_PERMIT_EXT" FRONT
  INSERT OR UPDATE ON permit_ext FOR EACH ROW
  BEGIN
  SELECT permit_ext_id.nextval IN: double new.id;
  END;
  /
  ALTER TRIGGER 'ON_INS_PERMIT_EXT' ACTIVE;
  
  CREATE TABLE 'PERMIT_EXT_INSPECTIONS '.
  (
  ACTIVATE THE 'ID' NUMBER (9.0) NOT NULL,
  SELECT "TYPECODE" VARCHAR2 (10 BYTE) NOT NULL
  );
  
  ALTER TABLE PERMIT_EXT_INSPECTIONS
  ADD CONSTRAINT PERMIT_EXT_INSPECTIONS_FK1 FOREIGN KEY (ID) REFERENCES PERMIT_EXT (ID)
  ENABLE;
  
  -SAMPLE DATA
  insert into PERMIT_EXT values (null, 'CITY', 12345, 'ABC'); -ID 1
  
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'A');
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'B');
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'C');
  COMMIT;
  
  update the title set permit_ext = 'DEF' where id = 1; -MISTAKE HAPPENS HERE, EVEN IF THE TITLE IS NOT THE FK ID IS

  Your problem is in the trigger. You update the pharmacokinetics of the permit_ext on the update. The trigger should be that when inserting.

  John

• Of the project are not related to the LMS, I should update file .au?

  I have LearnerWeb LMS System. I always published Lectora files. I downloaded a Captivate 8 (AICC) project and it is not from the LMS, although its placement in in Captivate... Any ideas how or what I can do?

  Is ACEC who supports LearnerWeb?

  I investigate LearnerWeb forums, and see if someone has posted recommended to publish settings for Captivate.

  For our LMS, we use SCORM course developed in-house and AICC is used only for externally hosted material as is tracking options are limited. (Once again, to our LMS. YMMV!)

  Also, there are parameters in the Cp of features publication that could conflict with the SCORM / AICC settings, if you want to get detailed advice, it is best to publish a screenshot of activate (Quiz / Reporting) and the Configuration screens.

  
  

  Activation of the report:

  

  Configure:

  
  

  
  

• The August 2012 calendar items are not available in the calendar of the modern user interface application

  The August 2012 calendar items are not available in the calendar of the modern user interface application.  They are available through a web browser and the application MS Office Outlook.  Y at - it a setting or another way to access old calendar items in the modern user interface.  The phone application has the same problem.

  Original title: elements of August 2012 calendar

  Hello

  I suggest for the link and run the troubleshooting utility Apps and follow the other steps in the article:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  See also:

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay in touch with email and calendar

  http://Windows.Microsoft.com/en-us/Windows-8/mail-calendar#1TC=T1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• What are the causes of streaks in the areas not related any cloning with photoshop elements 8 or 11?

  What are the causes of streaks in the areas not related any cloning with photoshop elements 8 or 11?

  You can post a screenshot showing the screen problem?

• I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  Question
  I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  I'm happy to have helped.

  It was something that many users asked when he changed first, and I initially did not know myself that the order of the buttons would make a difference as to if a button or a pair of buttons would be displayed.

  If you mark the post as solved while he is recorded in the answer will appear in the results of research and may help others.

• Favorite links are not displayed in the navigation panel

  Favorite links are not listed in the navigation pane. The favorite links Panel is displayed but the shortcuts in the folder are not displayed in the list

  Go to C:\Users\\Favorites\Favorite Bar, check the shortcut's properties, they could be hidden. I've seen several cases where the virus hides the shortcuts.

  See this thread:

  Favorites of IE have disappeared, but always seem to be there
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/IE-favorites-are-gone-but-appear-to-still-be-there/e8cf83fd-8085-425e-a2cb-16235924e4c7

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• Comments operations are not allowed for anonymous users on this virtual machine

  Hello

  After a lot of trying, I finally managed to connect to a virtual machine in VMware Server 2.0.2

  However, I get the error "comments operations are not allowed for anonymous users on this virtual computer" when I try to run notepad.exe. I think that some permissions must be set. So I put comments and guests of user group to be able to administer the object (VM); but still this error comes.

  Can someone help me pls with getting beyond this error.

  Thank you very much.

  This has come up before on this Forum. Be default, Windows does not allow for remote log-ins for accounts without password, which prevents the VIX to perform log-ins comments in this situation.

  You can follow the steps described in the following thread to enable remote log-ins for accounts without password or change the account to have a password.

  http://communities.VMware.com/message/910606

• StartScen.sh-> ODI-1423: working repository is not related to the master rep

  Hello
  
  I'm currently running a very basic case of the command-line command against the local agent:
  (using 11.1 ODI, Studio on Win7, agent on Linux RHEL5 run Oracle account)
  
  ./StartScen.sh IF_XKB_ADR_ENRICH 001 GLOBAL 5-NAME = xkagt
  
  I get the following error:
  
  ODI-1423: referential work THAT WORKREP is not related to the master repository
  
  It is quite a weird because I can't seem to find all the information from this forum or on the web on ODI-1423 error code.
  
  Also, my IF_XKB_ADR_ENRICH interface works very well from the Studio of ODI, for using the remote even very "xkagt" agent (this means everything is ok with work and masters representatives?)
  
  My odiparams.sh file looks ok because the agent starts and stops ok and working scenarios for the account of the workshop (fact the Laflamme family use different credentials to submit a work from the GUI?); the information seems to be there on the master repository driver, url, user, Word of past.
  
  I have tried to present the scenario of my PC with startscen.bat but I can't find the actual specifications of the parameter [AGENT_URL = < remote_agent_url >] (host: port?) documentation of ODI.
  
  Any help is welcome.
  Thank you

  "" "You're almost there. '"

  When you connect to the studio of ODI, you have the name of the repository work (remember in the login screen) and I think that that is passed to the agent.
  Whereas, when you use startcmd.sh, it should working repository name and one place to do that is odiparams.sh

  This error indicates that either you do not have your logical agent created for the context -
  or
  you give an incorrect logical agent as a parameter name.
  I think that you specify the name of the physical agent as a parameter. You must provide the logical name of the agent.

• Photos marked as favourites on the iPhone are not appearing in the Favorites folder in the pictures on Mac

  I mark my favorite photos directly on the iPhone. When downloaded from Photos on iMac selected Photos "Favorites" on the iPhone are NOT appearing in the Favorites folder.

  Apple forces us to use iCloud to operate? Because that I do not use iCloud and I used!

  IF you do not use iCloud photo library, favorite sides will not be synchronized.

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.