Error of gear:

Similar Questions

• Error of gear in preparation for the recovery

  I bought a recovery disc for my Pavilion m6-1035dx entertainment pc and I got 4 disks. I put in disc 1 and he started. He stopped at 29% on preparations for recovery with an error. It is said

  Reducer
  Copy the file fails
  From: G: \PRELOAD\BASE21SWM
  To: C:\RM\Image\BASE21. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it comes right back.
  How to spend it?

  If the DST Long failled. I'm sure that my warranty has expired. Hard drives are expensive? I'm a little angry because I bought a recovery disk I have need lol

• Error: accelertor gear not loaded then tried to play the Deer Hunter 4

  Original title: game deer hunter 4 pc game

  will not play accelertor unloaded of the equipment

  Hi eagleseyedreamer,

  Try these steps and check the result.
  a. click the Start button > Control Panel > hardware and sound > customization.
  b. click the display settings icon.
  c. click the Advanced Settings button.
  d. click the Troubleshooting tab.
  e. ensure that cursor acceleration is set to Full.
  f. apply changes, restart the computer and check if the problem persists.

  For further assistance, please post your request on the site of the game publisher.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought the original Gears of War for PC. I downloaded it, but I get an error code: 800700EA.

  I bought gears of war 1 for pc and I downloaded it but I get error Code: 800700EA when I try to install. Can someone help me?

  original title: I need help to install gears of war for pc 1.

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message with the error code?

  3. is there a specific problem installing with this program?

  4. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can read the article and then check.

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  See also:

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Gears - error when you try to insert values into a table with multiple columns

  Hello

  I started playing with the gears and SQlLite today and I get an error when I try to insert values into a table with multiple columns.

  I have:

  var db = google.gears.factory.create('beta.database');
      db.open('developerSet');
      db.execute('create table if not exists Developers (DeveloperName text, DeveloperAge int)');
  
      var devName = "Davy"
      var devAge = 32;
  
      try {
          db.execute('insert into Developers values (?, ?)', [devName, devAge]);
          alert('success');
      }
      catch (e) {
          alert(e);
      }
  

  I get the error:

  net.rim.device.api.database.DatabaseException; insert into developers values (?,?): SQL logic error or missing database.

  I use this reference: http://code.google.com/apis/gears/api_database.html

  Everything works if I have only one field as:

  var db = google.gears.factory.create('beta.database');
      db.open('developerSet');
      db.execute('create table if not exists Developers (DeveloperName text)');
  
      var devName = "Davy"
      var devAge = 32;
  
      try {
          db.execute('insert into Developers values (?)', [devName]);
          alert('success');
      }
      catch (e) {
          alert(e);
      }
  

  I use the plug-in Visual Studio 2.0 for 2008 that are running Windows XP SP and Simulator 2.13.0.56

  Thank you

  Davy

  Yes, a SQLite database will persist between battery pulls.  The database is registered either to internal MEM or removable media (not the device memory), depending on which is available on your device.

  In general, its not considered a best practice to remove your table as soon as it is empty and re - create it again when you want to add data.  This adds extra overhead fresh for the final, delete and insert first for a given table.  Instead, define and finalize your drawing before you create your table.  Once created, review the static schema.

  That being said, for development purposes, it may be easier to provide an easy way to drop your tables while you develop your schema.

  See you soon,.

  Adam

• When try to install Gears of War, received error: 0 X 80040702 Description: failed to load DLL: GameuxInstallHelper

  Original title:

  Error number 0 X 80040702

  Bymistake I manually deleted the installed game "Gears of War" of my c: program files / drive

  &

  not uninstall to uninstall a program through the control panel

  Now when I try to install the game, it displays following error:

  Error number 0 X 80040702

  Description: failed to load DLL: GameuxInstallHelper

  The installation program will end now

  I took using the link following & tried correctly but it did not help & again, I got the same error as the game is not properly uninstalled

  http://support.Microsoft.com/kb/968365

  Help, please!

  I'm using Windows 7 Home Edition Premium & the game used to work well earlier, before I deleted the prog files manually.

  Hello

  How you try to install the game? (Via CD or file downloaded)

  Method 1:

  When you try to install the game, try the following steps and check if it works:
  a. When Windows Setup program appears, cancel it.
   
  b. click Start, computer and go to the DVD / CD. Under the root of the CD , you will see setup.exe or with .msi file
   
  c. right-click on this file and select "run as Administrator" and check if the problem persists.

  Method 2:

  Run the fixit given in the following link and check if it solves the problem:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 3:

  If the above fails, try the following steps:

  Step 1:

  Create a new user account and check if the problem persists.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not occur in the new user account, follow these steps in the following link:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Make a place for customers to buy Mozilla gear. I think that it could possibly help support mozilla.

  Maybe the rewards for the gift? To enable this feature?

  I'm sure to keep .org, it needs there have no profit, which is great, but I don't know the exact limits of non-profit. I myself do not have the necessary funds to keep something like that.

  I think maybe by this announcement, he invites someone to find a solution, or find a way that I can buy goods mozilla which actually goes to the team of mozilla, or takes care of this browser. I have to admit, I love google, but just the search engine. When it comes to the current browser, I use mozilla. Chrome for me, is too prone to the error of the user, the nature of the benefit of the browser itself.

  I'm not so sure about mozilla, I would like to learn more. Thank you!

  I wish I could just make a donation to you guys all the time, but you know, the world is not just an open door. Thank you for your time and effort. I remember using mozilla when I was a kid. Linux is my strong point... I remember a class when the teacher taught us a bit of UNIX when it started to become a GUI, the old days, in any case, thanks again.

  Hello!

  Thank you for your interest in Mozilla and Firefox. It is good to hear users like you who want to help Mozilla and keep the browser will. Mozilla steps beyond the browser with privacy and security, keep the web free and open. Here are 2 places to donate or to help Mozilla and get gear.

  https://gear.Mozilla.org/
  Join.Mozilla.org

  All donations go to the Mozilla Foundation to improve and strengthen the web. With a quick search, you can find more information about the Mozilla mission. You can learn more about Mozilla here: https://www.mozilla.org/mission/

• After update, can't login, just gear turns

  After that I updated to 10.11.6, I cannot connect to my iMac. The login screen accepts my password, but the gear/turn icon just wirhout everything that happens. Then I rebooted into recovery mode and reinstalled bit El Capitan, the problem persists. I am at a loss total and rather hopeless.  Help, please.

  Thank you

  John

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• new openens tab, then close, error 501

  Impossible to go to web pages. says error 501 404 missing. Go to Explorer and it market what do I need to fix firefox

  If a tab closed by itself after its launch, this may be caused by a script on the page or a pop up late or adblocker, thinking it's a junk page. Can you check your extensions to what it is in the same direction and check its Options button? In addition, if you have not updated the extensions for a while, it's worth a try.

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates

• DJ 500 21:10 error

  Replaced gas station after not being able to go beyond 21:10 error. Error is always present. With the side right, cover, I looked inside gas station movements and movements of surface material. seconds in the station of service from its movements, moving the gears on the outside, only to make a grinding sound and stop. The transport then invades the gas station, another movement of small gas station, the carriage moves to the left about an inch or two and then 21:10 error appears again. I put the old service station back and exactly the same thing happened. Is it possible that I just replaced a bad service station with another? Any help would be greatly appreciated.

  At all work carried out on the plotter.  The big gray cable of the card at the top sometimes goes to main card gets stuck during a replacement of the belt and cause a 21:10 error.  Also, make sure that the plastic piece grey, you see when you look at right side is turned toward the front of the drawing board.

• OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

  As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

  When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

  The steps I've tried:

  plugged the power supply into the wall outlet

  roller cleaning

  THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

  reset the printer

  There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

  I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

  It is plugged into USB

  The main problem is the paper jam error.

  I don't know if the stuck carrier of ink is the cause.

  Hi @Comp-Tech.

  Thank you for joining the HP Forums!

  I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

  Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

  Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• Satellite P10 - 853 DVD Multirecorder disappear after burning error

  Hello
  I mistakenly try to burn a CD - R 16 X with Nero 7. normally, I used a lower gear. 16 x is the speed allowed by multi - recorder
  I got an error burning, but since the recorder is not available
  in the event log, there are a lot of id error 11 of Cdrom.
  with the following comment
  The driver has detected an error of the Comptroller on \Device\CdRom0.

  Someone at - it an idea? Is the DVDreader KO? shoul I try reinstalling the driver?
  I don't even know if I can try to reinstall, because I fear that the restore DVD will not read...
  Thanks in advance for your suggestions.

  C

  Hello

  I guess that your drive can read and write CDs / DVDs. Am I right?
  First of all, you should try to remove the drive from Device Manager.
  After you restart the operating system should recognize the drive.
  Check if after this procedure, the drive can read and write the middle.

• My iPad is no longer the automatic backups in icloud. When I try to do it manually it gives me an error message

  Automatic backup on icloud no longer works. When I try to run it manually it gives me an error message

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > managing storage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > BackUp), reboot the device and then turn on BackUp on new.

  If it does not help disable backup again, remove your existing back to the top of the settings > iCloud > storage > managing storage > backup > appliance (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > General > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do it with settings > iCloud > storage > managing storage > backup > this device > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• HP Designjet T1500 error 39.1:01

  Hello

  I work in a lab in small print in my school and we have currently two HP Designjet T1500. We dealt with this super annoying error 39.1:01, where the printer dump random rolls. This often happens while it is in standby. To do this, two printers and it happens to the two rollers. What I get on this just says error the only thing to do is to recharge it. Obviously, it's a short-term solution, but it takes a lot of time with how often this happens. So we can solve the problem for good, can someone help understand us why this is happening in the first place?

  Thanks in advance.

  Hello

  I had a similar problem.  After removing the covers and searching, I found a small motor in the rear tray, which was not fully committed.  There was about 1/16 "slop between the pinion gear and the receiver.  The engine strives constantly "original" himself, but could not and it was never counted back-and-forth.  After a while (days/weeks), something would cause the engine to give and error (39.1:01) I discovered was a "failure of switch 1 to roll."  This has traded the roll.
  
  I temporarily "fixed" the problem by using ONLY two roll, but it was unsatisfactory in the long term.  Finally, I stuck a small paper clip (not the kind of wire, but the kind of "jaws") in the tree that the receiver has been fixed, letting the shaft and gear to rotate freely.  I rebooted roll 1 and it worked for a while with no problems.
  
  I can't find anything on this bike-gear/or what he does, even not in service manuals.

• MacBook Pro Panic error - will not start

  I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice.  Backup the latest TM is dec 10. But can't even get the stages of recovery to work.  Tests of material D on OK.

  

  If you're in Snow Leopard as your profile is displayed, follow these steps:

  Reinstall OS X without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  If the above does not work, then follow these steps:

  Clean Install of Snow Leopard

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  5. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.