MacBook Pro Panic error - will not start

Similar Questions

• my macbook pro retina display will not download large files

  I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

  Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

  So far I have not seen this question arise with someone else.

  The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

  MacBook Pro (retina, 15 inches, end of 2013)

  10.10.1 Yosemite

  MacBook Pro, Mac OS X (10.7.5)

  Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

  If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

  Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

  If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

• Re: Satellite A40 - hard drive error - will not start

  My friend bought this laptop in April 2007 and has been very happy with it until about a month when he stopped startup in windows xp.

  At the start, she now gets the message

  "PXE - E61 media test failure - check the cable for.
  "PXE - M0F outgoing intel boot agent"
  "Insert system disk in drive."
  "Press a key when you are ready.

  and then the laptop does not start in windows.

  I thought that the hard drive can have detached, so I took it out and he handed in a State, but in vain.

  I also tried to reinstall with the recovery CD but get the following error message
  status «»
  GDISK (E) no such fixed disk 1 "

  It is followed by * ERROR *.
  Error number 11030
  invalid message destination drive
  X;

  I ran a Toshiba (or he could have Hitachi) utility disk that I burned on a cd and went up on the audit boot.

  It said there are problems on Toshiba MK4025GAS, which is the hard drive. details coincide with what it actually says on the disc.

  The BIOS sees the drive start on as he is listed as the master, with the cd as the secondary drive.
  Therefore, is it true that the drive is broken. If so - can it be repaired or is there another solution.

  I tried Googling the error message and there are conflicting messages on this issue, so your help would be very appreciated.
  It seems crazy that the reader can break after only 18 months - was there a defective batch?

  If that's the case Toshiba offers a replacement or it will cost a lot?

  Thank you

  Nashy

  Post edited by: Nashy - sorry - it was bought in 2007 is NOT 2006

  In your case, the HARD drive is certainly defective and you need to replace. Satellite A40 is pretty old laptop without guarantee valid and there is no replacement from Toshiba.

  Just buy a new HARD drive. Hard drives for this good old classic are not more expensive.

• my macbook pro early 2011 will not recognize my samsung Galaxy s6

  I have a new samsung galaxy S6 and my macbook pro 2011 do not recognize it when I plug it into the usb port, I tried the samsung kies software, nothing happens I have

  also tried smart switch, it saves only the backup phone that's all, I looked on the internet without success, can anyone help, THANKS

  Your post says Imac. What do you have? You have the latest drivers for the Galaxy s6 downloaded on the computer?

• Oracle Data Modeler 4.1.1.888 on macbook pro 15-inch will not let me choose the relationships on the model.

  Hello

  Can someone please give me an idea why the following happens?

  I have two machines:

  iMac 27-inch with El Capitan, java version 1.8.0_60

  MacBook Pro 15 inch with El Capitan, java version 1.8.0_60

  I use Oracle SQL Data Modeling 4.1.1.888 in both entities.

  In the iMac, I can change the relationships on the relational model, but I can't select them visually in the macbook only through File Explorer.

  I'd appreciate a comment or an idea about this problem.

  Thank you

  Hello world

  There seems to be a problem with the retina display and the only way to get around for me was to install an app that changed the screen resolution.

  View menu

  Hope that someday will solve this problem.

  PD.

  Once you change the resolution it looks a little bit fuzzy, but it's nice to be able to select the relationship.

• My Macbook Pro, El Capitan will not recognize my ipod classic 30 GB, but my windows 7 laptop work done!

  My Macbook 2010 installed pro that el capitan will recognize not my 30 GB classic ipod, but my work Windows 7 once laptop I installed iTunes does! Great, I thought, I'll reset the iPod to FACTORY DEFAULTS and clean and I hoped that my Mac would then see the ipod, but NO, not even appear in disk management. Have now tried 3 or poss 4 duct, which is a brand new 'authentic apple' one. It's really annoying. My iPhone 6 works fine, but I want the iPod when I run in the rain and connect to the older stereo on the truck. It seems that nothing wrong with the iPod itself, even if she had a replacement of the battery some time ago and worked fine since. He has never synchronized with my Macbook. I tried before El Capitan and several times since getting the laptop last year with Yosemite installed.

  Of course, I followed the Apple Support Troubleshooting, which basically is useless in this case. I have the latest version of iTunes, recently updated.

  Can someone please help! I am obsessed and really want to work. I love my iPod classic and will use it and get the case has been refurbished. It seems that historically there was a * of a lot of problems of this kind, has everyone just gave up and put their iPod to their phones in a cell?

  Any help would be appreciated. He drives me crazy and I googled all out.

  Joe

  Has been one of the things you tried to put the iPod in Disk Mode?

  Put the iPod in disk - Apple Support Mode

  Is "Disk Manager" the pre-installation disk utility application?

  If you put in Disk Mode and connect, it acts as a simple USB storage device, so it should appear at least in disk utility.

• Premiere Pro 1.5 will not load

  Hello

  After a certain period of time "away" from the edition he thought time to get back in it.  However, my Premiere Pro 1.5 will not start on my computer.  (Normally), it gets to loading Wave_Warp AEX, stop, think about it for awhile, then the re-boot computer itself!  It works fine on my laptop and I tried on my desk of wives without any problem.  I tried everything I can think to stop this happening, including a full system restore with the disc format hard drive thinking HARD own would agree, but no, the same result.  I suspect there is a compatibility problem with this computer, which is a version of Win XP Media Hewlett Packard media machine running.  Any help or advice appreciated - I have spent a lot of time trying to get this to work and it's before I started to edit!

  PS I'm very much a 'home' user, and if don't want to go to load again upgrade, only to find that would have the same problem - I had an older version of the 'trial' of Pro 2.0, but that had the same result, the computer has re-boots during loading.

  Thank you very much

  MKN

  If specific to the front, this Article Adobe KB can be useful for you.

  Good luck and we hope this can help,

  Hunt

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• How can I start my brand new MacBook pro, but I do not know password which someone of the store to

  How can I start my new MacBook Pro? I do not know the password for someone to the store to put it on the laptop. How can I change? I don't even connect to the laptop but I didn't even ID Apple on this topic, but I have an Apple ID on other Apple devices. Please help ASAP

  If you start the macbook does show something similar like this video? https://www.YouTube.com/watch?v=_g-3me2VTGo

  For a mac for optimum operation, you need a apple ID (to download apps and updates on the app store).

  If your mac asks you a password at startup upward, you must return it to the store you bought it and ask to remove it.

  I hope this helps!

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• SSTP will not start. Error 2.

  I need help to find out why the SSTP service on my lapyop will not start.

  Error is:

  Windows could not start the SSTP service on the local computer.

  Error 2: The system cannot find the specified file.

  The dll that service points is actually in the system32 directory, and I even replaced with that of another phone exact same that's working and I still get the error.

  I tried sfc/scannow and some not found errors.

  Everything is said in the event log is that the service could not start because the specified module could not be found.

  Please don't tell me to restore my computer that I can imagine that will work but probably someone out there has a solution. Thanks for any advice.

  Hello

  I suggest you try the steps below to resolve this issue.

  Step 1:

  Reset TCP / IP:

  a. Click Start > all programs > Accessories-> command prompt (right click and choose Run as administrator)

  b. at the command prompt, type:

  netsh winsock reset

  c. ignore errors and restart.

  Step 2:

  LocalService and NetworkService to the group administrator:

  a. Click Start and search CMD. Right-click on it and choose Run as administrator.

  b. at the command prompt, type: type the following command:

  net localgroup administrators localservice / add the Group of local administrators LocalService / add

  net localgroup administrators networkservice / add localgroup administrators NetworkService / add

  c. close and restart the computer.

  Thank you
  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.