error of USB hub

Similar Questions

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• Serial USB Hub error

  Hello

  I am currently using a USB-6009 case and another device connected via USB using a virtual COM port. These are connected to the computer via a powered external USB 4 port hub. Whenever I run VI I get the following error:

  Error 1073807343 has occurred to the property node

  (arg 1) visa set up a Serial Port (Instr) .vi.

  > Read MI3 Temp.vi-> SagDAQ.vi

  Possible reasons:

  VISA: Insufficient location information (Hex 0xBFFF0011) or

  the device or resource is not present in the system.

  After this error I have to disconnect and reconnect the device to use. I installed the drivers that came with the device and if I use the software supplied with the unit provided I have no problem with the device at all.

  I also noticed that if I do not use the USB hub there no problem either, however, I have to use the hub for this configuration that the ports are limited.

  I have this unit used in several parts of my VI, but everything works in series and all instances are completed by closing the VISA resource. If I open just one of the sub - VI which calls the device that I can run indefinitely without any problem on the hub, but for some reason when I use them in the main VI I get this error.

  Has anyone else had this kind of problem or knows how to handle?

  Thank you!

  Hello Jeff,.

  Josh has created a demand for service inside OR to ask for help, so after sent us his code, we noticed that he was using the configure serial port VISA 3 times one after the other, the third VISA configure serial port VI was so poping of the error settings in this VI were does not match the previuosly those configured. After leaving one set up VISA VI serial port in the code, the error disappears.

  Concerning

  Mart G.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.

• Elite 8100 desktop HP will not start when it is connected to the USB hub

  HI, I have a problem with USB HUB (US221A, 2PORT USB 2.0 SWITCH) - powered by the computer.  If the USB port is connected to the start the PC hangs at the HP logo screen - nothing works.   If I press F9 during boot error 43 occur.

  Looking for abios update.

• Docking station issues with power - power of the outdated USB hub

  We get an outdated 'USB hub power' error on my docking station with an E7440 anchored in it.  Worked fine, since I have received the device, but all of a sudden it-error when I try to access any flash drive.  Swapped out with a new one, number the same dock.  Also swapped power adapter, also with no effect.  Any ideas on the problem or resolution?

  Did you by chance install or upgrade of Citrix Receiver recently?  I did and my USB ports no longer works in the docking station.  This link has Details of why:

  blog.wisefaq.com/.../USB-Power-issues-with-Citrix-Receiver

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Airport Extreme and USB hub

  Hi all!!

  Witch of USB hubs with printer and hard drive connected can work with last gen extreme airport?

  Witch is good, the best of the witch? Powered? No powder?

  You can use any hub powered; USB port of the AirPort Extreme provides only a limited amount of energy itself, and is not enough to support many readers.

  (142446)

• Time machine on a usb hub

  Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

  Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

  Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

  These hubs are externally powered? And what else is connected to them?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Canvio Desk and passive USB hubs?

  I have Toshiba Canvio Office 5 TB HDD (HDWC250EK3J1).

  Manual says not to use passive USB Hubs, but given that this hard drive draws its energy from the wall socket, can I still use passive USB - Hub?

  Is it because it slows down HD or it causes real problems?

  There are situations where I would use passive USB - hub for a short period of time.

  So it causes losses of data or really bad things or what?