(Redirected) PowerEdge SC440

Similar Questions

• (Redirected) PowerEdge 2950 - disk failure

  Buon giorno

  HO a PowerEdge 2950 cui non riesco a qa Server da collegarmi console (window sin corso accesso).

  failure of disco 3 he display tell

  STO pensando di riavviare comunque server of it

  My devo acquistare UN disco in sostituzione.

  Come posso fare.

  Grazie by it support

  Sartore franco-

  ADMIN NOTE: replace character removed according to the TOU >

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• (Redirected) poweredge 2950 change all readers while keeping the BONES

  I have a poweredge server 2950 with 5 x 145GB sata HDD and installed a windows 2008 R2, and I SAS 6 x 2 TB hard drives which I bought to upgrade all the hard drives on the server, how can I do that without losing the BONE? I'm new on the environment and I would be grateful to give me advice and measures on this matter, thank you very much.

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• PowerEdge SC440 < ADMIN NOTE: Service tag deleted by privacy policy > [MS]

  Salvo, he questioned e poweredge a SBS 2003.

  da sabato last ha problemi. Ad ogni d works 5,10 minutes per andare poi... freeze Reed is if there mouse moves. Ho tried has con farlo partire da RAM UN banco di! Go, my the quesiotne nn cambia. Ho tried a dictionary (sound mirror) my cambia nulla nn nightclub. Ho tried con inoltre di rete a scheda altre.

  potete avere cortesement eun preventivo by the riparazione farmi?

  Grazie

  Buonasera,

  HA verificato is vi sia libero spazio a sufficienza disco C: nel?

  In ogni caso di seguito it link by creare it o pen drive boot cd by the diagnostica di:

  downloads.dell.com/.../EW1354A1.exe

  Speaking saluti

  Manual

• RN50 A21 BIOS ERROR - poweredge sc440 [MS]

  Salvo, is da oggetto Sera yesterday he mio server ha di funzionare dandomi then an error RN50 video has 21 BIOS... Unfortunately video chip al Riconducibile... Contact VI per avere notizie in merito alla parte di ricambio (CN-0NY776-70821-87 t-903U the motherboard).

  Sicuro di a vostro riscontro Patu I miei più restaurant saluti

  Giovanni Brizzi

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• (Redirected) PowerEdge T110 power problems

  The software that I use on this desktop Dell computer is Windows Server 2012. When I go to turn the computer off by using the start menu, it does not close completely down. It turns off my monitor and then it just seems, it puts my computer in standby or Hibernate mode. However he won't do anything once it's done. I can't hold the real power button down to turn it off. The only way I can get it to even come back is if I unplug the power cord going to the back of the computer and let it sit for about 30 seconds. When I plug it back in and press the power button on the computer, it is. If I do a Windows Update or whatever it is to restart my computer it does every time. This problem started only recently and I know that she should not do this.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• PE SC440 and PERC H800/810

  Hi all.  Can't find a good answer online and thought, that I would ask here.

  The PowerEdge SC440 will support a PERC H800 or 810?  I'm looking to connect a MD1200 or 1220.

  Any ideas or comments are welcome.  Let me know if you need further information.  Thank you!

  Macc23,

  Unfortunately the SC440 will not support the H800 series controllers. The only controllers supported for the server the U320 scsi controller or SAS5/ir. Which can take in charge the MD1200/1220.

  Sorry I don't have the answer you are looking for. Let me know if this helps to clarify things.

• ESXi UPdate 3

  OK, here's my problem.  I have a PowerEdge SC440 running 1 GB of RAM (will be 4 GB in the future) with a Core 2 Duo.  My problem is when I try and install ESXi Update 3 from scratch, I get an error saying can't find the drive to install on.  However, when using ESXi Update 2.  It works perfectly.  What is the problem?

  VMware has switched the driver used with ICH7 controllers so Update 3 a drive connected ICH7 is considered an IDE drive.  You can either used a custom oem.tgz to correct file that or this http://www.vm-help.com/esx/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php.

• (Redirected) Location DIMM on Poweredge R720

  Currently, I just get 8 * 8 GB RAM additional and stacked in my Poweredge R720 with single processor already occupying 8 DIMMs with 8 * 8 GB DDR3 RAM. After installed I have just gained only 12 * 8 (DIMM_A1-A12) RAM on my server, while the rest of 4 * 8 RAM incapable of stacked.  Their all-Workaround available that I can't is able to compile the rest of the DIMM DiMM_B1-B12 location for my existing processor. Looking for any expert advise to meet this darkness.

  Thanks in advance.

  Hi robustguy,

  Please repost this in the Forum of servers to help.

  http://en.community.Dell.com/support-forums/servers/

• (Redirected) Dell poweredge 1950

  I have a dell poweredge 1950 server that was given to my school and I am trying to install windows server 2003 on it, but an error saying:

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running

  How can I fix?

  I also tried to boot Ubuntu from a usb key and that no longer works.

  I also said to update BIOS or Flash the Bios but I don't know how to do and do not know if that'll fix it.

  I want to just get to the top and running, it can be Ubuntu or windows everything is easier.

  Any help would be greatly appreciated

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• (Redirected) Kit rails for PowerEdge R220

  Hello

  I want to install Dell PowerEdge R220 if small locker (total depth 60 cm). Distance between vertical rails is unfortunately only 41cm (as you can see below image). Is there some original rails (rails kit) for R220 that adapts to these conditions.

  Thanks for the reply.

  

  Hi Punicz,

  Please repost this in the most expert servers support forum.

  http://en.community.Dell.com/support-forums/servers/

• (Redirected) Card SCSI Dell poweredge 1951 backlane

  Hello world

  I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

  I found online something to my request: [View:www.amazon.co.uk/.../ref=sr_1_fkmr1_2]

  but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

  Thanks for the tips.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• map of scsi (redirect) dell poweredge 1950

  Hello world

  I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

  I found online something to my request: [View:www.xbyte.com/ProductDesc.aspx]

  but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

  Thanks for the tips.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• (Redirected) Verificar driver - (PowerEdge T420)

  Minha maquina amanheceu led alaranjado avisando para verificar o driver com 1.

  em primeiro momento e removi EU realoquei, renew ao normal logo, na semana seguinte o erro retomou has appear.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• (Redirected) Update PowerEdge R310 video/graphic card?

  Recently, we noticed that our server r310 worked very very slow.  This server is running only software milestone of the camera.  It seems that the graphics card is overloaded.  Is there a graphics card is recommended to anyone who would be able to manage more than 30 cameras without be bogged down?

  Hi pullon,.

  Please repost this in the forum of the more expert assistance server.

  http://en.community.Dell.com/support-forums/servers/