Elite 8100 desktop HP will not start when it is connected to the USB hub

Similar Questions

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.

• LaserJet M1132 - scan not possible when it is connected to the USB of TimeCapsule airport port

  Hello

  I'm on Mac OS X Lion 10.7.4

  Installed the latest drivers to date: 1.2

  The multifunction printer is pluged on a TimeCapsule 7.6.1

  Printing works fine.

  But scanning is not possible using "HP Director" and with a brand like HP, I expect to have drivers with the message box from standard scanning Mac OS X (Capture of Image and therefore all software that use this API in the operating system).

  This works very well with a printer of a different brand.

  Is there a solution?

  Thank you

  Well Yes, by design, the USB port on the airport take in charge of printing, not for analysis or fax.  I'm sorry.

• Application server will not start when Oracle ProcMGR connection goes to a network account

  I'm building a new PeopleSoft FSCM 9.2 with 8.54 Peopletools environment.  Initially, I created my application server and ORACLE ProcMGR service account was set to local system account.  I need to change this user to a network account.  I have the network of the local system administrators group account.  I did that the user has read/write access to the home of PS and PS config directoies.  After changing the user in the ORACLE ProcMGR service, I can no longer boot my app server.  I get a message that "internal error: CMDTUX_CAT:1098 error: cant create queue.  If I change the local service account, the application server will start.  What should I do to be able to change logon service to a network account?

  The security policies of Windows required to launch Tuxedo domains as a service are:

  1. log in as a service

  2. Act as part of operating system

  3. replace process level token

  4 increase quotas

  Please add these policies for the Local Administrator account or network Admin created for the user ID Manager of Proc Oracle and PeopleSoft. This information is from the Km Doc: E-TUXEDO: unable to start domains on the server as a Windows Service (Doc ID 1623062.1)

• Satellite C660 does not start when it is connected to the battery

  Satellite C660. I can only start with the battery disconnected and connected charger.

  Since when you noticed this problem?
  Is the battery that you always use original one you have with your machine?

  When Windows is fully charged and you put the battery in addition is recognized correctly battery?
  What happens when you unplug the AC power supply

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• I downloaded bridge in my application, but it will not start when I click the icon

  I downloaded bridge in my application, but it will not start when I click the icon

  Hello

  Did you try to unsintall and reinstall the application?

  Kind regards

  Sheena

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Pre installed Vista on iQon will not start. No available disk. The manufacturer had to cease their activities. I have the product key for Vista. Buy a Microsoft store repair disc?

  IQON laptop manufacturer had to cease their activities. Pre installed Vista - no disc. Vista will not start. Unable to access restore or recovery mode.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  And Microsoft sells more than Vista.

  Try this:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to the website of the manufacturer of your computer (In your particular hardware manufacturer case) and get the latest drivers for your particular model computer or laptop.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you want to try the Startup Repair tool, read this information:

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

• Service not will not "started" when I reboot.

  I have an update service that automatically updates every other day or two.  In Services, the Startup Type is "automatic".  I have to manually switch the "Started" status every time that I reboot.  Even when I reboot whose status is defined as "Started", the State is changed nothing in the status column.  I have been in contact with the service provider and they say that if the update will not happen if the Service is not "On the road" and that it is not a problem because of their program.  Can someone tell me please how to keep this service "Started" when I reboot?  Any help will be welcome!

  No services actually stay 'on the road' in the status column when you restart.  They start out empty and starts only when requested to do so (by another program, ask them to start please, or a user like you clicking on the Start button or by typing the start command).

  Normally, there will be a scheduled task in Task Scheduler to start the service and make it check for an update.  For example, this is how things like Windows Update check updates (and a great many other things, even things not Microsoft as Apple iTunes).

  Since the updates of your program fail when this service is not running, and the program fails to ask the service starts, it seems to me that this program you use has a flaw that needs correcting.

  However, you could (maybe!) be able to work around the problem by defining a command to start the service when you connect.  Here's how:

  1. Open the service properties (double-click on it) and note the service name in the upper part.
  2. Run the command : startup of the shell to open your startup folder.  Right click and choose "new > shortcut.
  3. Use this as your shortcut command:

     net start (service name)

  4. Save the shortcut.  Optionally, you can change the shortcut for "reduced work ' then you don't see it flashing on the screen every morning.

  Now, when you connect, this shortcut will fire and start the service, how the program is supposed to do in the background when necessary.