error opatch

Similar Questions

• The directory entry not addressed. ERROR: OPatch due to a problem in NApply.

  Hi Experts

  I'm trying to run this fix in:

  SPU 11.2.0.4 database and combo OJVM PSU 11.2.0.4.2 (CPUJan2015) Patch 20132517 )

  Using this command

  opatch napply-skip_subset-skip_duplicate

  Returns this error

  The directory entry not addressed.

  ERROR: OPatch due to a problem in NApply.

  points of oraInst.loc to correct location

  $PATH has the following executables: brand, ar, ld and nm

  OPatch is the correct version

  no ongoing process for this db

  Set the directory content patch on 777

  I use this command from the patch directory, Read Me

  I'm running out of things to check. Any ideas appreciated thanks.

  11.2.0.4

  Release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  DA

  Hi all

  I have raised a SR, and this fixed it:

  CD/U01/oracle //db/tech_st/11.2.0/oui/bin

  ./attachHome.sh

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein

• ERROR: OPatch failed due to problems in the area of patch.

  HIII...,
  
  IM upgrading Forms 10 g OracleAS and reports in Oracle E-Business Suite Release 12.
  
  IM one of the additional fixes 9357237 such application mentioned in the metalink document
  
  Upgrade OracleAS 10 g forms and reports Oracle E-Business Suite Release 12 [437878.1 ID].
  
  Im getting the following error in the application of the patch
  
  
  Oracle home: /u02/oracle/PROD/apps/tech_st/10.1.2
  The Oracle Home Inventory: /u02/oracle/PROD/apps/tech_st/10.1.2/inventory
  Inventory Center: / u02/app/oraInventory
  from: /etc/oraInst.loc
  YES location: /u02/oracle/PROD/apps/tech_st/10.1.2/oui
  YES shared library: /u02/oracle/PROD/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
  Location of Java: /u02/oracle/PROD/apps/tech_st/10.1.2/jre/1.4.2/bin/java
  Location of the log file: /u02/oracle/PROD/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log
  
  The patch directory field must be a number.
  
  ERROR: OPatch failed due to problems in the area of patch.
  
  
  IM using OPatch version: 1.0.0.0.64.
  
  When I downloaded nd unzipped the patch just like that
  
  [oracle@msftrac2 patches] $ cd 9357237 /
  [oracle@msftrac2 9357237] $ ls-l
  Total 132
  drwxr-xr-x 4 oracle oinstall 4096 13 April 2010 8447875
  drwxr-xr-x 5 oracle oinstall 4096 13 April 2010 9352208
  drwxr-xr-x 4 oracle oinstall 4096 13 April 2010 9357234
  -rw - r - r - 1 oracle oinstall 84630 13 April 2010 README.html
  -rw - r - r - 1 oracle oinstall 67 13 April 2010 README.txt
  -rwxr-xr-x 1 oracle oinstall 2258 remove_demo.sh April 13, 2010
  
  
  Can someone help me solve the problem. ?... waiitng for your suggestions...
  
  
  Thanks and greetings...

  Hello
  This shows that you do not have the README file in patches

  8447875
  9352208
  9357234

  Try to create a README.txt file in each of these directories and then apply the patch.

  Furthermore, what is the command that you use to apply this hotfix. (opatch apply or opatch napply)

  Thank you

• the CheckConflictAgainstOHWithDetail error opatch

  I'm working on a 11.1.0.7 environment on a 64 bit Linux machine.
  I need to apply the patch 9654987 of the OH. I am trying to ask if there is a conflicting patch to the OH regarding this patch.
  But I get the error below. Someone has encountered this problem before?
  
  I use the last versioni OPatch. i.e. OPatch Version: 11.1.0.6.2
  

  rmpsdbs01!oracle (bash) /u02/storage/patches/CR412618
  MYCSMR1 % opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654987
  Invoking OPatch 11.1.0.6.2
  
  Oracle Interim Patch Installer version 11.1.0.6.2
  Copyright (c) 2007, Oracle Corporation.  All rights reserved.
  
  PREREQ session
  
  Oracle Home       : /u02/app/oracle/product/11.1.0.7/MYCSMR
  Central Inventory : /u01/app/oracle/oraInventory
     from           : /etc/oraInst.loc
  OPatch version    : 11.1.0.6.2
  OUI version       : 11.1.0.7.0
  OUI location      : /u02/app/oracle/product/11.1.0.7/MYCSMR/oui
  Log file location : /u02/app/oracle/product/11.1.0.7/MYCSMR/cfgtoollogs/opatch/opatch2011-10-05_01-50-34AM.log
  
  Invoking prereq "checkconflictagainstohwithdetail"
  The location "./9654987/README.html" is not a directory or a valid patch zip file.
  Prereq "checkConflictAgainstOHWithDetail" not executed
  PrereqSession failed: Invalid patch location.
  
  OPatch failed with error code 73

  Where is it you have unzipped the file OPatch? It should be in $ORACLE_HOME directly, replace all of the existing files. Can have $ORACLE_HOME/OPatch in $PATH.
  Giving you "$ORACLE_HOME/OPatch/opatch version?

  Nicolas.

  Published by: Gasparotto N October 5, 2011 13:26

• Error: OPatch component is not available in the software Center to patch

  Hello
  
  I've got OEM 10.2.0.5 and try to apply the patch to database. On the step 2 'List of targets' when you press 'Next' get this error message:
  
  Upgrade OPatch. -OPatch component is not available in the software library to the xxx of the target patch. Please run the OPatch tab jobs update task to get the OPatch version required for this target. See the FAQ #6 production grid Automation with deployment procedures (www.oracle.com/technology/products/oem/pdf/grid-automation-deployment-procedures.pdf) for download OPatch at the library of software in online and offline mode.
  
  I see the #6 FAQ and downloaded OPatch manually, upload succeeded according to the answer.
  
  In deployments OEM-> Configuration-> components, I see that the p6880880_10.2.0.3_38 correction, status is "ready". But still get this error.
  
  What should I check? How do I ensure that 6880880 has been installed or not installed?
  
  Maybe I should make a configuration of rights for target xxx those who?
  
  Really need help
  Best regards
  Nikolajus

  Hello Nikolajus,
  assuming that you're using "Oracle Database Patch".
  The first page of this procedure includes a 'Upgrade OPatch' checkbox, this check box selected?
  Concerning
  Rob

• OPatch commands fail with code 255 error and not able to find pots YES

  
  Hello

  I am trying to apply a patch using opatch but I get this error: "OPatch was not able to find pots YES to load their duration. Please provide valid Yes location using 'oui_loc' option. OPatch failed with error code 255".»

  Oracle is 11.2.0.3 x 64 on Windows Server 2008R2 x 64. The PATH variable have % ORACLE_HOME%\OPatch, % ORACLE_HOME%\OPatch\jlib, %ORACLE_HOME%\bin in it.

  The single command OPatch that works and not to throw the error is the command "opatch version.

  OPatch Version: 11.2.0.3.5

  OPatch succeeded.

  No luck on the search for resolution of problem or documentation on MOS.

  I can't find any documentation on the option 'oui_loc '.

  Any help would be appreciated.

  Sébastien

  First check that your ORACLE_HOME\oui\jlib directory already exists. If so, make sure you have "srvm.jar" in the directory. If not, copy and paste the directory or file (depending on what you're missing) of 11.2.0.3 another environment. I had the same problem and support was able to recreate the problem by renaming the folder jlib, but my specific question was the missing file 'srvm.jar '. Copy one through another system solved this issue. If you are missing "srvm/jar", you can also check ORACLE_HOME\jlib for "srvm.jar", because this could be a problem, as well (it was for me).

• Opatch error.

  Salvation of DBA
  
  I do the upgrade of the stand only 10g discoverer.
  
  I have installed BI 10 g discoverer.
  I applied the patch Oracle Discoverer 10.1.2.3
  I applied Opatch "Apply Cumulative Patch 1 7111842 or higher for the node for your server of discoverer."
  
  but the Opatch gave error as follows.
  
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/uix/common/edit_refresh_options_template.uit ' and ' / s03/AQH/aqhdisk/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/uix/common/edit_refresh_options_template.uit '.
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/discoverer/config/disco.conf ' and ' / s03/AQH/aqhdisk/discoverer/config/disco.conf '.
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/discoverer/config/configuration.xsd ' and ' / s03/AQH/aqhdisk/discoverer/config/configuration.xsd '.
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/WEB-INF/web.xml ' and ' / s03/AQH/aqhdisk/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/WEB-INF/web.xml '.
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/WEB-INF/struts-config.xml ' and ' / s03/AQH/aqhdisk/j2ee/OC4J_BI_Forms/applications/discoverer/discoverer/WEB-INF/struts-config.xml '.
  
  Comparing ' / s03/Discover/DiscPatches/7111842/files/discoverer/util/ApplyEnhEnv5948646.pl ' and ' / s03/AQH/aqhdisk/discoverer/util/ApplyEnhEnv5948646.pl '.
  There is 1 questions copy files to Oracle Home.
  FILE PROBLEM: some files are not patched.
  OPATCH_JAVA_ERROR: The Patch was not correctly applied.
  The check of the patch failed.
  
  ERROR: OPatch as verification of the patch failed failed.
  [oracle@aqherptestdb 7111842] $
  
  
  Please guide me to solve the problem above.
  
  Best regards
  SG

  PGO

  There is 1 questions copy files to Oracle Home

  Check that this file has not been copied by the hotfix.

  Did you stop all services before you apply this patch?

  Kind regards
  Hussein

• apply opatch 2617419 error

  opatch $ apply
  
  Setup Oracle interim Patch version 1.0.0.0.61
  Copyright (c) 2009 Oracle Corporation. All rights reserved...
  
  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)
  
  Oracle home: /orad01/proddb/9.2.0
  The Oracle Home Inventory: /orad01/proddb/9.2.0/inventory
  Inventory Center: / home/oraprod/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /orad01/proddb/9.2.0/oui
  YES shared library: /orad01/proddb/9.2.0/oui/lib/hpunix/liboraInstaller.sl
  Location of Java: /orad01/proddb/9.2.0/jre/1.4.2/bin/java
  Location of the log file: /orad01/proddb/9.2.0/.patch_storage/ < patch ID > / *.log
  
  The patch directory field must be a number.
  
  ERROR: OPatch failed due to problems in the area of patch.
  
  
  I am running HP - UX, I can't get success in the application of the opatch, why he wouldn't?

  Yes, because at the moment you are uzipping the Opatch utility.
  There is no need to do anything else with it. Just unzip and you're - ready to use.

  The same information can be obtained from the readme:
  How to install the utility:
  ---------------------------
  To install this patch simply extract the zipped file
  use unzip or winzip, depending on the platform. You must extract
  the zip directly under the ORACLE_HOME.

  To check the version of the opatch utility installed in step above,
  go to the OPatch directory and run 'version opatch.

• Issue by applying opatch 19434967 10.1.2 on ORACLE HOME

  Hi all

  It is just an extension to the problem addressed in the previous post.

  10.1.2 OPATCH_JAVA_ERROR = CheckConflict: 19434967

  During the application of the o patch 19434967 on Oracle Home, obtained with the error below 10.1.2.

  ERROR: 1

  OPATCH_JAVA_ERROR = CheckConflict: OPatch cannot treat the patches of layering due to no support YES. Please take the last group of patches YES 10.1 "My Oracle Support", and then try again.

  Impossible to check the bug/folder conflicts and component of due diligence.

  For the error above asked patch 6640838 , IE install newer YES, who have successfully completed. But this Setup, downgrades the OPatch utility at 1.0.0.0.61, earlier it was 1.0.0.0.64, and this resulted in the error below when you apply the o19434967 patch for the second time.

  ERROR: 2

  The patch 19434967 directory does not match the id of the patch.

  ERROR: OPatch failed during pre-reqs check.

  After some research, I found that the error(ERROR:2) above can be solved by installing the latest OPatch, if I did all the problem is repeated once again.

  Can anyone please suggest how to apply this patch successfully.

  Thank you

  Moore.

  Hello

  You must select the following options when you apply the patch, YES:

  Universal Oracle install

  Install SDK Component

  Java Runtime Environment

  You must deselect the following component:

  Installation Oracle libraries

  Cannot apply the Patch: OPATCH_JAVA_ERROR = CheckConflict (Doc ID 1544470.1)

  Kind regards

  Bashar

• The application of the fix 6400501 error

  Dear experts,

  I'm dealing with an error when you try to apply patch 6400501 .

  The Oracle Home /u01/applR12/apps/tech_st/10.1.2 is not the Central inventory.  OPatch wasn't able to get the details of the House of the inventory.

  ERROR: OPatch failed due to problem of stocks.

  Here is the log:

  Creation of log file "/ u01/applR12/apps/tech_st/10.1.2/.patch_storage/6400501/Apply_6400501_05-14-2015_01-19-33.log".

  Start session OPatch Apply to 05-14-2015_01-19-33;

  Analyzed by OPatch command arguments are: apply

  OPatch version is: 1.0.0.0.58

  The content of the file: /etc/oraInst.loc

  inventory_loc = / u01/oracle/oraInventory

  Check pre - req. RAC...

  Access the inventory... (repeat 10 times, delay of 30 seconds each time)

  System Command: /u01/applR12/apps/tech_st/10.1.2/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/u01/applR12/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/applR12/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/u01/applR12/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/u01/applR12/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/u01/applR12/apps/tech_st/10.1.2/oui/jlib/share.jar:/u01/applR12/apps/tech_st/10.1.2/jlib/srvm.jar" opatch/O2O "/u01/applR12/apps/tech_st/ 10.1.2' ' / u01/applR12/apps/tech_st/10.1.2/oui ' opatch.pl 1.0.0.0.58

  Result:

  OPatch output:

  HOME_INDEX =-1

  The Oracle Home /u01/applR12/apps/tech_st/10.1.2 is not the Central inventory.  OPatch wasn't able to get the details of the House of the inventory.

  ERROR: OPatch failed due to problem of stocks.

  solved by applying the p6640838_10106_LINUX patch

• Error when the migrating Tier Platform applications with Oracle E-Business Suite Release 12 (Doc ID 438086.1)

  Hi Experts and Hussein snoussi-Oracle

  
  

  relating to the SR 3-9035673951 (GCS does not help me) and DOC-ID 438086.1 , 
  

  currently, I got an error now on environmental target in Chapter 2, step 9, while implementing one of the Report_Inventory.html (which resulted in section 1, step 12) patches that currently patch 6857221 .

  Already created gravity SR 1 but still no update.
  
  There is an error:
  ----------------------------------
  

  [prodmgr@PROHCMS1 6857221] $ pwd

  / p01/patch/Manifest_Patch_Exalogic/6857221

  [prodmgr@PROHCMS1 6857221] $ echo $ORACLE_HOME

  /P01/Oracle/PRODHR/apps/tech_st/10.1.2

  [prodmgr@PROHCMS1 6857221] $ opatch apply

  Setup Oracle interim Patch version 1.0.0.0.57

  Copyright (c) 2007 Oracle Corporation. All rights reserved...

  We recommend that you check the OPatch documentation under

  OPatch/docs for reference to use. We also recommend that you use

  the latest version of OPatch. To get the latest version of OPatch

  and other support related issues, please refer to the document

  293369.1, which is visible from the metalink.oracle.com address

  Oracle home: /p01/oracle/PRODHR/apps/tech_st/10.1.2

  The Oracle Home Inventory: /p01/oracle/PRODHR/apps/tech_st/10.1.2/inventory

  Inventory Center: / home/prodmgr/oraInventory

  from: /etc/oraInst.loc

  YES location: /p01/oracle/PRODHR/apps/tech_st/10.1.2/oui

  YES shared library: /p01/oracle/PRODHR/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so

  Location of Java: /p01/oracle/PRODHR/apps/tech_st/10.1.2/jre/1.4.2/bin/java

  Location of the log file: /p01/oracle/PRODHR/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  Creation of log file "/ p01/oracle/PRODHR/apps/tech_st/10.1.2/.patch_storage/6857221/Apply_6857221_05-26-2014_17-50-17.log".

  Appeal of fuser to check active processes.

  MISSING_COMPONENT: oracle.developer.forms, 10.1.2.3.0

  This House of Oracle has no components/versions required by the patch.

  ERROR: OPatch failed during pre-reqs check.

  
  Here I installed this form of Oracle 10.1.2.3.0 once again on the target environment?
  
  Note:
  -------------
  source env:
  bash - $4.2 $ORACLE_HOME/bin/frmcmp_batch | grep forms | grep Version
  10.1 forms (form of the compiler) Version 10.1.2.3.0 (Production)

  
  

  Need suggestion on this subject and any help much appreciated.

  
  

  Thank you and best regards,

  Françoise Hany
  

  
  

  Here I installed this form of Oracle 10.1.2.3.0 once again on the target environment?

  If this is the level of the Group of hotfixes in 10.1.2 $ORACLE_HOME on the source node then Yes you have to have the same level of patches on the target node group.

  Thank you

  Hussein

• Errors in trying to apply Patch 6400501 as a step of pre-upgrade (11.2.0.3)

  I am applying Patch 6400501 as a pre - req for a GR 2 11 upgrade and get the following messages.
  
  This has been already applied once before without problem on another server.
  
  The process contained in the error messages - are not active - or at least I can't see them not active.
  
  How can I stop?
  
  Thank you
  
  
  
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  appltest@testap01:/stage/patches/6400501 > opatch apply
  
  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...
  
  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)
  
  Oracle home: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/inventory
  Inventory Center: / d01/xxxxx/EBSTEST/inst/apps/EBST2_tebsap02/admin/oraInventory
  from: /etc/oraInst.loc
  YES location: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/oui
  YES shared library: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
  Location of Java: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/jre/1.4.2/bin/java
  Location of the log file: /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log
  
  Creation of log file "/ ds01/mclebs/EBST2/apps/tech_st/10.1.2/.patch_storage/6400501/Apply_6400501_07-17-2012_11-10-44.log".
  
  Appeal of fuser to check active processes.
  
  Fuser invoking "/ d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/wrap".
  Invocation of fuser to jump on "/ d01/xxxxx/EBSTEST//apps/tech_st/10.1.2/bin/oracle" file does not exist or is a directory.
  Fuser invoking "/ d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/proc".
  Fuser invoking "/ d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/rman".
  Invocation of fuser to jump on "/ d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/extproc" file does not exist or is a directory.
  Problems verifying files that are active.
  The following files have the active process when there should be no activity.
  Before proceeding, stop and stop all active processes.
  1 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/wrap
  2 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/proc
  3 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/rman
  
  
  ERROR: OPatch failed during the prerequisites check.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems verifying files that are active.
  The following files have the active process when there should be no activity.
  Before proceeding, stop and stop all active processes.
  1 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/wrap
  2 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/proc
  3 /d01/xxxxx/EBSTEST/apps/tech_st/10.1.2/bin/rman

  Use the command fuser to find the process ID and kill it manually - http://linux.die.net/man/1/fuser

  Or, a question ' ps - ef | grep applmgr"assuming applmgr is the owner of the files and kill all active processes using"kill - 0 .

  Or just restart the box and make sure that none of the services is started automatically.

  Thank you
  Hussein

• opatch - MISSING_COMPONENT: oracle.j2ee, 10.1.3.4.0

  HII,
  
  Im passage of 12.0.4 for 12.1.1, that I've updated OracleAS 10g Release 3 (10.1.3)-4 patches (10.1.3.4) group and now apply the patch 6702510 it is showing the following error:
  
  MISSING_COMPONENT: oracle.j2ee, 10.1.3.4.0
  This House of Oracle has no components/versions required by the patch.
  
  ERROR: OPatch failed during the prerequisites check.
  
  Please can someone help me resolviing the problem... what I would do... ??
  
  Thanks in advance... waiting for your repliess...

  Salvation;

  Pelase see:

  Cannot copy Registry.Dat when you apply the Patch on Oracle EBS R12 Adogjf() [ID 438882.1]

  Errors during application of Patch: adogjf() failed to copy Registry.Dat [551841.1 ID]
  Cannot copy Registry.Dat [ID 382695.1] Adogjf()

  Respect of
  HELIOS

• opatch lsinventory InvPtrLoc - location problem

  9.2.0
  Sun Solaris
  
  Hi all
  
  I just oraInst.loc explicitly executing opatch location, but still it take place by default, any idea?
  

  $ opatch lsinventory -InvPtrLoc */oracle/TEST/product/9.2.0/oraInst.loc*
  
  Oracle Interim Patch Installer version 1.0.0.0.57
  
  Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
  
  
  
  We recommend you refer to the OPatch documentation under
  
  OPatch/docs for usage reference. We also recommend using
  
  the latest OPatch version. For the latest OPatch version
  
  and other support related issues, please refer to document
  
  293369.1 which is viewable from metalink.oracle.com
  
  
  
  Oracle Home           : /oracle/TEST/product/9.2.0
  
  Oracle Home Inventory : /oracle/TEST/product/9.2.0/inventory
  
  Central Inventory     : /u001/oracle/oraInventory
  
     from               : */var/opt/oracle/oraInst.loc*
  
  OUI location          : /oracle/TEST/product/9.2.0/oui
  
  OUI shared library    : /oracle/TEST/product/9.2.0/oui/lib/solaris/liboraInstaller.so
  
  Java location         : /oracle/TEST/product/9.2.0/jdk/jre/bin/java
  
  Log file location     : /oracle/TEST/product/9.2.0/.patch_storage/<patch ID>/*.log
  
  
  
  Creating log file "/oracle/TEST/product/9.2.0/.patch_storage/LsInventory__09-10-2009_13-13-39.log"
  
  
  
  Result:
  
  
  
  LsInventory: OPatch Exception while accessing O2O
  
  
  
  
  
  OPATCH_JAVA_ERROR  : An exception of type "OPatchException" has occurred:
  
  OPatch Exception:
  
    OUI found no such ORACLE_HOME set in the environment
  
    Can not get details for given Oracle Home
  
    An exception occurs
  
    null
  
  
  
  
  
  There is no Interim Patch
  
  
  
  
  
  
  
  OPATCH_JAVA_ERROR  : An exception of type "OPatchException" has occurred:
  
  Can not get a list of inventory on this home.
  
  
  
  ERROR: OPatch failed because of Inventory problem.

  Thank you
  Hamda seynaeve

  As with all products Oracle Opatch has probably changed over time.
  It was introduced in 9.2.0.6 announce 9.2.0, which is a valid, non-existent version number.
  I remember that Opatch simply does not work for older versions of 9.2.
  Also it is most likely at the outset that it was not possible to specify the location of the inventory on the command line.
  Without more information from your side, it just seems that you are running the wrong version of the opatch against an incorrect version of the database. Not surprisingly, this translates exceptions, and those can also not be addressed.
  Please make sure that you are running the correct software.
  If you think that this is an error, make sure that you complete the retail version and correct from the start.

  -----------------
  Sybrand Bakker
  Senior Oracle DBA