Error opening command run.
Hi all...
Hi John,.
Thanks for posting your question on the Forums of community of Microsoft.
1. is the computer connected to a network domain?
2 are connected with the administrator account?
3. don't you make changes to the computer before the show?
Here are some ways you can follow to resolve the problem:
Method 1:
Method 2:
Scan your computer anti-virus using the Microsoft Safety Scanner.
Reference:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: If you run the virus scan will get deleted the program is infected with the virus. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
If your computer is on a domain network, please post the request in the TechNet support community:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
Hope this solves the problem.
Tags: Windows
Similar Questions
-
I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came. Why?
Try right click on the setup.exe > run as admin.
If this does not work, try the Vista Hardware and drivers Forum:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
See you soon.
Mick Murphy - Microsoft partner
-
Does not open the files shared via the command run
We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.
Kind regards
Vijay Kumar C.M.
Left thread (files, folders, and online storage) for (web and networks).
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.
Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx
Thank you.
-
Portfolio not open error when you run DBCA
Hello
running 9i on AIX 5.3
By starting dbca, get the Error Message "open wallet has failed."
The dbca GUI appears and works very well.
Anyway, in case anyone has the problem please let me know...
Entrance of portfolio in the sqlnet.ora
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = / ora01/admin/DB_01/wallet)
)
)
Thanks in advanceSee Note: 369562.1 ERROR: Open Wallet failed when starting NETMANAGER/NET CONFIGURATION, it indicates that the message can be ignored (the score mentions DBCA too).
HTH
Enrique
-
Previously, work job FTP in the batch file gives message "error opening script file.
I have two FTP jobs on two separate machines that I've been running as tasks scheduled for a few years with success. They are on the same network, but we're on the field, the other is out of the field. Both are Windows XP SP3.
Starting this week, two of them fail when you try to load the actual script FTP file. Here is an example of the ftp command that I use: FTP d - n-i-s:C:\scripts\getmyfiles.txt
The message says "Error opening C:\scripts\getmyfiles.txt" and displays help FTP. I should also mention that the FTP seems to work fine if I connect from the command prompt, and does not use a script file manually.
Both of these batch files containing similar (different but calling script files) FTP commands were executed the week last successfully.
Any suggestions are appreciated!
Hi Kristin,
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en/categories/
Hope the helps of information.
-
% Error opening nvram: / startup-config (Permission denied)
I get a weird error, permission denied issuing 'show config' at the level of the user. We use this everywhere in the environment without any problems.
IOS: System image file is "flash0:c2900 - universalk9-mz.» Spa. 152 - 3.T.bin.
R1 #sh run | I have aaa
AAA new-model
AAA authentication login default group Ganymede + local
AAA authorization exec default group Ganymede + authenticated if
AAA authorization commands 1 default group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
accounting AAA commands default 15 stop only Ganymede group.
AAA - the id of the joint session
R1 #sh run | I have priv
privilege exec level 1 traceroute
Ping privileges exec level 1
privilege level exec 1 see logging
See the privileged exec level 1 configuration
privilege exec 1 show privilege level
show privileges exec level 1
R1 #disable
R1 > show config
11855 262136 bytes using
% Error opening nvram: / startup-config (Permission denied)
You are indeed allowed to run the command (as evidenced by the fact that the command run).
See the config is actually an alias for the command more nvram:startup - config
Accordingly, the question is the permission on the file, not the control itself.
Unfortunately, the file systems do not explicitly support permissions. This used to be implicitly supported by permissions to see the config.
Maybe it's a bug. I opened a case on it if you need really need this feature.
-
I got this error:
"CoreTelephony Trace file error
A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
Software does not, especially of photoshop...Any ideas?
Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.
-
Cannot install KB973688: error: Windows Setup: error opening installation log file
Original title: cannot install KB973688
After you download http://www.microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en#Instructions
I run the file and get the error message from Windows install: error opening installation log file. Verify that the specified log file location exists and is writable
Hello
Try this:
Step 1: Run the file as administrator.
a. right click on the downloaded installation file.
b. Select run as administrator.
c. then follow the installation wizard.
Step 2: If it does not help, reset the windows updates and then try to install the update.
How to reset the Windows Update components: http://support.Microsoft.com/kb/971058
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I get "there was an error opening this document, the file is damaged and cannot be repaired." Sometimes it works, but more often than not I get this message when you try to open a PDF well my IMAP email server. I also have the latest player adobe downloaded on my computer and I have run Norton 360, which is to day saying my computer is free from any malicious dishes. Help, please!
Hello ErikAtkinson,
You can try saving the PDF file on your desktop before trying to open it.
See if that helps with corruption problems.If this isn't the case, then I suggest that you post in the forums Adobe for Adobe Reader. I have included a link below:
http://forums.Adobe.com/community/adobe_reader_forumsThey better be able to help with their product.
Sincerely,
-
Nikon ViewNX2 cd is not open or run
Original title: nikon coolpix s9300
You just bought a new coolpix 9300. Nikon ViewNX2 cd is not open or run. Any help?
Bill
Hi William,.
Thanks for posting the question in the Microsoft Community. First of all, I would like to congratulate you on the purchase of a new camera. I will certainly help you to question.
We start with two questions:
1. the problem occurs only for a particular disc?
2 are you able to open other discs?
3. do you get an error message? If Yes, what is the full and exact error message?
4. have you installed Windows XP Service pack 3 on the computer?
If you are faced with the question with a particular disc, there are chances that it might be damaged. I suggest you check out the link and try to download the software:
http://Imaging.Nikon.com/lineup/software/viewnx2/spec.htm
If the problem is not resolved, please respond with more information to help you best.
Thank you.
-
Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... »
It is the process that a memory patriot employee was told in email: Ok then please try this.
1. click on start, run, type Gpedit.msc in the Open box, and then click OK.
2. under Computer Configuration, expand models of administration and then click System.
3. in the settings pane, click on disable AutoPlay and then click Properties.
4. click on active, then on all players in turn it off the AutoPlay box to disable AutoPlay on all drives.
5. click OK to close the turn off AutoPlay Properties dialog box.
6. restart the computer.
Thanks for choosing Patriot Memory.
The problem I have is I plug in some usb drives and I don't want to open. I want to do all of them open or no. They seem to now open fine, it's not autoplay'ing I want to do.
Thank you.
GPEDIT is functional on windows XP Pro, xp family, that it will not work... In addition,
If the USB functions are a problem, either upgrade the software of the chipset, either install the
youre MB mfg software (intel, amd, etc.), the "chipset installation utility" has drivers,.
software & programs of the operating system for its proper use. If you are running XP pro, & have installed chipset
utility, then the procedure to run GPEDIT will be here: http://social.technet.microsoft.com/Search/en-US?query=GPEDIT&ac=3
-
I come with a message "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.
Any ideas what is happening?
Thank you
Hi and thanks for your time.
The program was an application to create your own music
I don't have any problem installing other applications programs...
The solution was a scan with malware bytes who discovered infected with the registry data.
So I deleted it and after running a lot on the line scans, I deleted the program, I wanted to install.
Everything is still better then...
-
Open and run purchased downloads
I bought and download Corel Album 7. However, it is not open or run. I have windows XP. What should I do now? I get the message that an error has occurred in Setup.exe and it's the end of this.
I agree that this is a pretty generic error message that does not lend itself to an easy search. You can open the event viewer (start > run > eventvwr > OK) and see if there is an error with an error code of your application Corel, but I think your best bet is to try first installation of Corel by phone free support (and you could tell that Album 7 - If this is the correct name of your application - is so new that there are no entries in the Corel KnowledgeBase for this).
-
Error opening Windows Firewall: 0 x 80070005 access denied
I have Windows Vista Ultimate Service Pack 1 installed on my computer. When I opened a Bittorrent client, I receive the following error message
"Error opening Windows Firewall: 0 x 80070005 access denied."
I've added exception for a specific port 24366 (used by the BT client) on the Windows Firewall, to receive incoming connections. However my port (http://www.utorrent.com/testport?port=xxxxx) and the test of telnet to the port, seem to fail. The port online test gives the following error
"Year error has occurred!
" Port 24366 does not seem to be open."This looks like a problem with the Windows Firewall. Any ideas on how I could get this problem resolved?
Thank you Rob for the various ideas. I finally got this working! Not sure if this is a Vista problem or just my computer, but when I opened the customer of BT using 'RUN AS ADMINISTRATOR', it started working.
I hope this helps others out there of similar problems. It's a two-step process,
1. make sure that the port of the torrent is open in Windows Firewall
2. open the customer of BT using 'RUN AS ADMINISTRATOR'NOTE: I am already connected with an administrator account.
Thank you guys.
-
I get a "MGL FATAL ERROR 257.426" (error: open registry key) need help
I get a "MGL FATAL ERROR 257.426" (error: open registry key) need help.
How can I solve this problem?
friends
NTVDM is the program that emulates back and very old windows. There is nonethe reason that the NVidia Control Panel would need this.Registry programs, outside the cause of problems, often have a facility to cancel.Look in the program.Plan to run the restore of the system (type in the search on the start menu) to rollBack to a date that precedes ran you the program.--..--"sam defcon" wrote in message news: 8c6a3fe2-af63-4 c 78-a203-b454e9a5876c...> I get the error message when I run GTA 1...>> and I can't open my control panel of nividia graphics card or play tank combat> without Ntvdm.exe crashing.>>>> Since I ran the Defrag registry BoostSpeed, the MGL error and> NTVDM. EXE crashes.>>> --------------------------------------------------------------------------------> friends
Maybe you are looking for
-
Satellite A215-S4747 screen does turn off not moored with Dynadock.
I am now running XP on my new laptop and I am VERY happy that I could find all the necessary drivers. A behavior while also happening is when Vista has been loaded, it is that I could not get the laptop screen turns off when it is docked. I have sear
-
Unable to connect to servers to update for my games or anti-virus software
I was somehow infected with vista antivirus 2010. I followed guides online on how to remove it. It is suggested to enter the registry and remove the stuff out there, but things that he said that I had to delete were not at all there. I ran Malwareby
-
get the position of the mouse on the screen
How to use the local, local X Y properties of mouse click event... Any example pls...
-
Cannot download the PDF DOCUMENT ' IF IT WORKS please EXIT AND TRY NEW 103:103.»
Original title: I GET THE error MESSAGE WHEN you TRY TO DOWNLOAD a DOCUMENT ADOBE ACROBAT READER "IF IT WORKS please EXIT AND TRY to NEW 103:103. I'M TRYING TO DOWNLOAD A PDF DOCUMENT, BUT GET A MESSAGE "IF IT WORKS PLEASE EXIT AND TRY NEW 103:103.»
-
I changed my picture of account, he has changed the background, I don't like the change, that is editable? I don't see an option "change the background of account '?