Error: Path/Source Safari is not found

Similar Questions

• Error starting FreeLoader: Module 'KxmlLib' not found.

  The message "Error Starting FreeLoader: Module"KxmlLib"not found." what do I get when I try to run my application on a BB device.  In the Simulator, it does very well.    KxmlLib is a library to the library (preverified) BlackBerry project kXML 2 . The KxmlLib project is a project of the library without the source, just the pre-audit jar files and in the KxmlLib properties > Java Build Path > libraries a pre-audit jar and Properties KxmlLib > Java Build Path > order and export has the JAR checked for export.  I guess it's okay.

  After that it got a little hairy, I had to the the KxmlLib of the project a dependency of my application of FreeLoader project, run it on the simular to produce the KxmlLib JAR in the deliverables of the project KxmlLIB directory.  I removed the dependency of the project KxmlLib , copied from the KxmlLib.jar in the project space of the FreeLoader , right click on it project and added to the build path.

  Applications of freeLoader compiles and runs without any error of security on the Simulator.  When I try to package and run it on the device of BB, it fails.   Clues?  I browsed this forum before I asked - I solved all my other problems during development with the help of this community and the RIM fanastic.  Thank you very much!

  Brandon

  You will find that there is a cod associated with your pot of KxmlLib.  There is no end to your device unless you deliberately include in your distribution.  You may be signed too.

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• Error "LoadLibrary failed with error 126: the module is not found ' at the launch of programs

  Original title:

  From some programs, the program starts partially, then a pop up message saying "LoadLibrary failed with error 126: the module is not found. When you click on the 'OK' button, the program stops. I had this problem with several graphics applications such as PSP and Rhinoceros 3D.

  Any suggestions what can be causing this "error 126"?

  type cmd and click the black box for it...

• I can't extract the zip files; I get an error message that says: "Application not found".

  I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

  Hello

  1. you use the functionality of Windows Vista to unzip file or third party software?

  2. have you done any software or hardware changes on your computer before this problem?

  To work with this problem, see the following methods.

  Method 1:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  View the results of the analysis.

  Method 2:

  Run the fixit from following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Check if it helps.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• Error message "Required line was not found in the INF" LifeCam Cinema 3.0 on Windows Vista Edition installation Home Premium

  The LifeCam Cinema hardware installation error
  
  Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium edition

  LifeCam installed on my laptop XP

  Hi seuss460,

  LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.

  You can download software LifeCam here

  Step 1: You can follow the steps mentioned in the article below

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Step 2: See also the steps mentioned in the article below

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• ERROR: WebVPN capture directory was not found.

  I'm doing a capture of packets to debug a problem of user webvpn.

  capture the test user type webvpn (I enter a username valid vpn)

  then stop the capture.

  No test of capture

  I get the following error: "ERROR: capture directory WebVPN was not found."

  Capture worked the first time and created the test_capture.zip file.  Then, when I run the capture again and used the same name, it returns this error. Now even after deleting the file, or even change the name, it always returns the same error and does not create a file. I tried to create a directory "WebVPN" but that did not help. I have enough space on disk0.

  Any help appreciated. Thank you.

  Try to stop the capture by using the following command before the disconnection of the webvpn user session:

  No capture test type webvpn users

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

  vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
  Unable to connect to the host.
  Error: The specified version is not found

  I installed in this order:

  
  Workstation 8.0.1

  VIX 1.11.0.18997

  On a Win7 x 64 SP1 box.

  There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.

  
  Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.

  
  How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

  # Workstation 8.0.0
  vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  Thank you.

  I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

  Add this to your config file and it will work...

  # Workstation 8.0.1
  vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Error #2108: Homepage of scene not found.

  My project is a Web site and I created different movieclips for each webpage (history, Audio, Video, etc.). Now I need to insert some ActionScript in order to be able to return to the home page, when I click on a menu item in the movieclip. This error keeps showing up:

  ArgumentError: Error #2108: Homepage of scene not found.

  at flash.display::MovieClip/gotoAndStop()

  at rocknroll_HistoryofRock_fla::MainTimeline/goHome()

  The code I've written is:

  import flash.events.MouseEvent;

  homeH_btn.addEventListener (MouseEvent.CLICK, goHome);

  function goHome(evt:MouseEvent):void {}

  gotoAndStop(174,"HomePage");

  }

  Thanks for your help!

  Download your fla on a file server and post a link.

• Error -: AIP-50904: see message not found

  Hello
  
  We have 3 windows system act as TP (TP1 and TP2, TP3).
  
  When the message is from TP1, TP2 reached and TP2 sends back an acknowledgement to TP1.
  But when the message is from TP3, the acknowledgement of receipt is sent to TP1 instead of TP3 and appearing in TP1 error is "error -: AIP-50904: see message not found.
  
  The configuration on TP2 TP1 and TP3 are as follows:-
  
  (1) the DUNS of TP1 and TP3 IDS are the same.
  (2) the names of the TP1 and TP3 delivery channel are different.
  (3) transport server names are the same, but their IP addresses are different.
  (4) the agreement names are different, but their agreement IDs are the same.
  
  Can you please address this issue on the priority and consider the question as soon as possible?
  
  Kind regards
  Vishal
  + 919881737231

  Hi Rakesh,

  Since the duns ID TP1 and TP3 are same, B2B to TP2 resumes the incorrect agreement (the one that is indicated for the TP1) and sends it and the ACK to TP1. TP1 having not any message correlated business it is erroneous and TP3 remains waiting ACK. Please use unique IDS of DUNS to solve this problem.

  Thanks and Regrads,
  Prasanna

  Published by: Prasanna Patric on December 11, 2008 23:38

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.