Error: role "RQADMIN" is required to perform this operation

Similar Questions

• Cannot perform this operation because the default mail client is not properly installed... help

  I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

  Thank you

  A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

  HAL

  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Get-journal authorized to perform this operation by using read-only user role, was refused.

  Hi people,

  What is the minimum role to get the newspaper my whole army ESX?

  I use the following script oneliner:

  Get-VMHost | Get-Log messages | Select -ExpandProperty Entries | Where {$_ -like "*error*"}
  

  but it always ends in failure result:

  Get-Log : 05/07/2011 9:15:11 AM    Get-Log        Permission to perform this operation was denied.    
  At C:\Temp\a5440b5a-6f5a-4fe2-9027-e432ba87c869.ps1:3 char:21
  + Get-VMHost | Get-Log <<<<  messages | Select -ExpandProperty Entries | Where {$_ -like "*error*"}
      + CategoryInfo          : NotSpecified: (:) [Get-Log], NoPermission
      + FullyQualifiedErrorId : Client20_RuntimeDataServiceImpl_GetAvailableLogList_Error,VMware.VimAutomation.ViCore.Cmdlets.Commands.GetLog
  
  
  

  Any suggestion please?

  Permission can be derived from the API method used by the cmdlet Get-Log under the covers.

  In the description of the BrowseDiagnosticLog method, you will see that it takes the Global.Diagnostics .

  The default read-only role does not have this privilege!

  You will need to create a new role.

  The other point to watch is the location in the structure of vSphere where give you permission.

  I feel that this specific one should be given to the root of the vCenter to allow access to newspapers.

• Error "a plugin is required to view this content" for the integrated Google map, but plugin not identified.

  When I try to view a page that has a map Google map into the page, I get the message error 'a plugin is required to view this content. However, I don't know which plugin, where to find, etc. I tried searching for this question but could not reach anyone else has a similar problem, or there seems to be a plugin for Google Maps that I can find.

  The page is here:
  http://osiama.org/lodges#

  The map is displayed when turned on one of the links in the table.

  I was going to propose to add the type = "text/html" in the embed tag, but found a discussion saying that does not work: http://stackoverflow.com/questions/17688628/firefox-tells-user-they-need-a-plugin-to-display-an-embedded-webpage

  After the graduation in this thread, what to place your stir inside a tag object like this:

  <object type="text/html" data="https://www.google.com/maps/embed/v1/place?key=AIzaSyA4e2zvSt_VeKb6u_IMvBSAuIPPINgfzNU&q=Nazzaro+Community+Center&zoom=15" height="300" width="450" frameborder="0" style="border:0;">
    <embed src="https://www.google.com/maps/embed/v1/place?key=AIzaSyA4e2zvSt_VeKb6u_IMvBSAuIPPINgfzNU&q=Nazzaro+Community+Center&zoom=15" height="300" width="450" frameborder="0" style="border:0;">
  </object>
  

  So in other words, the browsers that can use the object tag will do it, but for those who do not, the embed is still there. Does it work?

• guestScriptManager error: "guest authentication that is used doesn't have sufficient permissions to perform this operation.

  Hello

  I tried several days create a workflow to automatically remove the E1000 adapters on a virtual machine and its replacement by Vmxnet3 while maintaining the configuration of the network adapters.

  Everything works fine with Linux VM (as the configuration is automatically preserved) but I have an error on the virtual Windows computer where I have to run a Powershell script (tried with batch also script) with guestScriptManager package.

  Every script I try to run on a Windows 2008R2 VM does not reach the same step: create a temporary file in the comments. Error: "guest authentication that is used doesn't have sufficient permissions to perform this operation (workflow: create a temporary file in the task (item1) invited / Scriptable #8)"

  Strangely, I am able to run a script, one or two times to just after a VM deployment and then I'm stuck with this error.

  I tried with the local and domain administrator with no luck. I have no other description or log on to the error...

  Any help would be appreciated

  Thank you

  For those who are wondering, I just updated my 5.1 ESXi Update 2 and the problem is solved.

  Thanks to this thread: https://communities.vmware.com/thread/403326

• Not able to download error summary "could not perform this operation because the mail by default is not installed correctly"

  Victorinox original title: Windows problem

  Im a senior looking for a job. When I'm craig's list and to to load my windows exployer RESUME come with a window that says "cannot perform this operation because the default mail is not properly installed. Can someone give me please a detailed step by step procedure to solve this problem?  Thank you so much Denny

  Hello Denny carguy,

  -Who is your provider of mail service?

  Windows XP has the default Outlook Express e-mail client. To send and receive emails using Outlook Express, you must configure it.

  See the links to find out how to set up Outlook Express in Windows XP.

  How to set up Outlook Express

  Microsoft Outlook Express

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• Error "You do not have sufficient rights to perform this operation" while trying to format the hard drive.

  Title: insufficient rights to the HD format

  I have Admin rights on my new laptop Dell E-6520, Win7 running.

  When I try to format my modular HD, I get the following message:

  "You don't have sufficient rights to perform this operation.

  Any suggestions would be greatly appreciated.

  THX,

  SB

  Hello

  I am happy to know that the problem is solved. Do not hesitate to contact us, in the case where you face other problems in the future.

• Message: Cannot perform this operation because the default mail client is not properly installed

  I get the following error message:

  Cannot perform this operation because the default mail client is not properly installed

  Could someone help me please?

  Moved from the community involvement Center

  Hello

  You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Windows Live Mail is popular
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  Windows Essentials help:
  http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

  You can access outlook.com via Windows Live Mail

  Set up an email application with Outlook.com - Microsoft Windows Help:
  http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

  Web-based e-mail services can only be made the default e-mail program in these 2 cases:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar

  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

  Original title: loss of entrance of Protocol in the list of saved files

  I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

  Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

  It's a good thing, I thought of the research on other boards for my missing post.

  HKEY_LOCAL_MACHINE\Software\Classes\mailto

  c. in the Edit menu, select new, then clickstring goodwill.

  d. type of Protocol of URL as the name of the new string value

  e. exit the registry editor

• BlackBerry smartphones "your computer must be connected to the internet to perform this operation" during the synchronization.

  My curve has this error message:

  "your computer must be connected to the internet to perform this operation. Make sure you are able to connect to the internet and try again."

  Worked well with desktop manager 4.6...

  Update 4.7 for explode...

  found an article to fix... regedit and change hklm-software-reasearch in motion-syncronize blackberry\

  change the status from 1 to 0

  has worked well...

  until the 5.0 update...

  now it does not work yet, and this key is no more.

  Of course, there are internet and there are no active firewall or any application that might block this traffic, no proxy settings, routing of questions etc...

  There must be the answer to this question... I know that I'm not the only person having this problem.

  Craig

  Hello

  You only need to connect onve, and then you meet the demand.

  I ran twice and I can't logically explain why it occurs.

  On first installation I finally have the PC connected directly to the cable modem, after disabling the firewall software.

  It took about 6 hours with Kapersky to ensure that he did not get infected. It was a friends DM 4.5

  The second was total frustration with version 4.7. On my network.

  I, like you, have the routers and firewalls in front of the cable router if I had a packet sniffer, it would have been easier to trace.

  I reasoned that the PC and applications like explore and Outlook can access internet with out fail.

  I then followed the gateway IP address for my PC.

  In Windows click on start, then run, then type 'cmd' and press ENTER to open a DOS window.
  -In this window type "ipconfig" and press ENTER.
  -L' display the IP Ethernet the subpattern options, etc..  'Default gateway' is what you need.

  -Copy the IP address of the default gateway.

  Then, I started the Blackberry device manager and open the properties Blackberry icon in the systray.

  I was trying to see if I could find what the Office Manager was trying to access, or at least which way he wanted to.

  I found the Blackberry router configuration tab. Click at the bottom right "activate the bindings defined by the user.

  So basically, you can provide a route to bypass "static route. I entered my gateway address default PC, hit apply and OK.

  I did a cold start system, began the DM and he never moans, simply press on the internet and I couldn't access to the

  synchronization options. It worked without changing the settings of firewall or a router. I deliberately left it in place that that

  Gateway IP worked for another program on my PC. (I have mu PC configuration to device on the home network.

  After constant running for a few weeks, I went and deleted the bypass address. 4.7 installation has yet to miss a

  Beat.

  Well, I broke probably 87 regulations of the FCC, all agreements of the RIM, but it worked for me. !

  If I'm not here tomorrow have a drin for me at the party!

  I just installed the 5.0 Desktop Manager and never had the problem.

  So, basically, it's your call!

  The worst that can happen is it doesn't work and close down more away, the best that happens is that you logged.

  I recommend you do a program of "sniffer". This is the one suggested by Blackberry in the KB article

  (Packet capture tool (for example, Wireshark®))

  Let us know what you think.
  Thank you

  Bifocals

  

• The caller of the API do not have permission to perform this operation

  I generated an OAuth token and I get the following result every time that I have the query API (either directly or to try it out the tests here: https://secure.na1.echosign.com/public/docs/restapi/v5)

  {
  "message": "the caller of the API need not have permission to perform this operation."
  'code': "PERMISSION_DENIED".
  }

  
  

  I checked "on" for each single scope and set the modifier to the account (I also tried to change the group, but that made no difference). The key to OAuth has been authorized by the account used to register for this account of eSign. It is also a developer account, and it's under a user different from what I write under.

  
  

  Basically, all I want to do is get the status on all documents and see whether they are signed or not. I don't like that the user has permissions for that.

  
  

  Thank you!
  

  Hello Ollie,

  The error is specific to an API call or is happening with several API calls that you are trying to do with OAuth token? Can you inbox me your email address with which you have created the application API with OAuth?

  Kind regards

  -Usman

• Unable to open computer virtual: 2 permission to perform this operation was denied

  I have VMware Workstation 10 which I use to connect to some Machines virtual ESXi host 5.5 with a local user created with power user role Annie. I get "could not open Virtual Machine: 2 permission to perform this operation was denied. I tried all possible permissions even with nothing Administrator role does not. For some reason, it only works with the root user. I appreciate any help on the issue. Thank you.

  Solved. You log on to the workstation as root and add the users the created on ESXi hosts.

  Thank you.

• Converter 5.5 - was refused permission to perform this operation

  Hello

  I get the following error message when you use the Converter server to import machines Hyper-V and Powered-on - authorization to perform this operation was denied

  I installed the converter directly on the machine which was getting the same problem and it is good!

  I disabled UAC on server Converter, reinstalled, built a new virtual machine and installed new converter!

  There are a few errors in the logs

  2013-11 - 04T 14: 21:04.551 + 13:00 [02076 'Ufa.HTTPService' error] unable to read the request; flow: io_obj p:0x01fd94ec, h:-1, < tube "\\.\pipe\vmware-converter-server-soap" >, < pipe "\\.\pipe\vmware-converter-server-soap" > >, error: class Vmacore::TimeoutException (operation timed out)

  I turned off SSL on the server Converter working process, but it does not work

  I have 30 of Hyper-V VMs for import and cannot do this one by one!

  
  See you soon,.

  Matt

  Hello

  You have activated the account local administrator with password? and let me know if you have tried with the vm's local administrator account and try like this ipaddress\Administrator

• During the installation of Acrobat DC why do I get a configuration error, saying: it cannot be installed on this operating system?

  I welcomed CC updated XI Acrobat Acrobat DC.  I bought DC Acrobat but serial number does not work with the version installed by creative cloud.  And when I uninstall this version, downloaded Acrobat DC installation generates an error indicating that the application cannot be installed on this operating system. I lost my money by buying the download?

  Previously titled:

  How to install a downloaded version of Acrobat DC purchased with a serial number allocated, when I get a Setup error, saying: it cannot be installed on this operating system? Creating cloud had already updated Acrobat XI in DC, but will not work with the new S-N

  Allan, please see: download Acrobat products | Standard, Pro | DC, XI, X. Please check the system requirements for | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC