Error running the jsf file.

Similar Questions

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• Download error. The downloaded file has no verification. Code of error = 0x80040507__Google Chrome Installer

  Hello. I have a problem that I recently received these messages on computer blue screen comes and goes... (bsofd) when im using the internet only. Told me to stop using ie 8 and google chrome but when I tried to download it it was the message that I received... "Download error. The downloaded file has no verification. error code = 0 x 80040507 ". I have windows xp... SP3. my hardware is dual cpu, 2 GB ram, 1 TB hard drive and 512 graphics card. Please help me

  Hi Arvind,

  You try to run chkdsk on the machine and check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The best way to perform checks to find errors in the system files on a regular basis?

  What looks like the best of fashion to plan the audit of the system partition
  the presence of errors in the system files and bad sectors on the system partition?

  Tasks scheduled by Vista?
  Vista help recovering all documentation of chkdsk,
  so I'm afraid it is supported under Vista?

  Hello

  read the information below about

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  and also that

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Error reading the configuration file

  I install the Adobe Access 4.0 trial license server and when I run the g - r on the Tomcat installation dir \licenseserver Validator.bat I get a message "error reading configuration file. Here's the log dump:

  [] 2012-12-20 22:46:32, 176 INFO [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] class loader of partition creation «flashaccessserver"with «[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]» libraries

  [2012-12-20 22:46:32, ERROR 582 [. com.adobe.flashaccess.server.license.tools.Validator [Partition (flashaccessserver)]] could not validate the deployment tenant "flashaccessserver/sampletenant".

  com.adobe.flashaccess.server.common.configuration.ConfigurationException: error reading the configuration file

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)

  to com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl. < init > (TenantConfigurationImpl.java:110)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)

  at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment (Validator.j ava: 255)

  to com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment (Validato r.java:283)

  at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment (Validator.j ava: 301)

  at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)

  at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)

  Caused by: org.apache.commons.configuration.ConfigurationException: could not load the configuration

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)

  ... 7 more

  Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; HVAC-complex - type. 2.4.b: the content of the element "KeyServer" is not over. A the "{"http://licenseserver.flashaccess.adobe.com/tenant": file"}' should. "

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException (exercise wn Source)

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$ XSIErrorReporter.reportErro (Unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT (unknown Source) type

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType (KNU nown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent (exercise wn Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement (KNU nown Source)

  to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDri ver.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (exercise wn Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse (unknown Source)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)

  ... 9 more

  I use a relative path to my .pfx file to the transportServerCredential and the licenseServerCredential in the flashaccess - tenant.xml and my password was encoded using the Scrambler.bat.

  Also, when I check using the configuration http://< LicenseServer >: 8080/flashaccessserver/flashaccess/license/v2 I get the message "license server is configured properly."

  Any ideas why the Validator.bat cannot read the configuration file?

  Neil and may,

  I also used the evaluation of access version 4.0, and I got stuck in the same place you did.  I had two main symptoms.

  (1) the validator was not with the same error that you are experiencing.

  (2) later, while trying to acquire a license for playing packaged content, encrypted, the license acquisition failed, and the cause of the original error has also pointed out the Key Server parameter in flashaccess - tenant.xml.

  According to the documentation, the certificate server key (and in fact the key server itself) are supposed to will be necessary only when a policy calls for remote key service to clients of iOS.  But, I took a chance and added the .pem file in the sampletenants directory and made him the flashaccess - tenant.xml as follows:

  Configuration | Tenant | Certificates | KeyServer. File | path =

  The result was a successful validation of the configuration and the successful license acquisition and reading - and the key server is not even in the course of execution.  Apparently with 4.0 certificate is part of the minimum for the scanner configuration, even if the documentation says something quite different.

  Good luck, hope this helps.

  Scott

• Error #2136: The SWF file

  I am trying to learn how to use classes. The book I use gave me this example.

  In Vechile.as

  package {}

  import flash.display.MovieClip;

  import flash.events.Event;

  Vehicle/public class extends MovieClip {}

  public var _gasMileage:Number;

  public var _fuelAvailable:Number;

  public var _milesTraveled:Number = 0;

  public var _go:Boolean;

  public void vehicle (mpg:Number = 21, fuel: Number = 18.5) {}

  _gasMileage = mi/gal.

  _fuelAvailable = fuel;

  this.addEventListener (Event.ENTER_FRAME, onLoop, false,

  0, true);

  }

  public void onLoop (evt:Event): void {}

  If {("go-ahead")

  -_fuelAvailable;

  _milesTraveled += _gasMileage;

  If (_fuelAvailable < 1) {}

  this.removeEventListener (Event.ENTER_FRAME,

  onLoop);

  }

  trace (this, _milesTraveled, _fuelAvailable);

  This.x = _milesTraveled;

  }

  }

  public void go (): void {}

  "go-ahead" = true;

  }

  }

  }

  In the main.fla

  Framework 1

  var: = new Vehicle vehicle (21,18.5);

  addChild (vehicle);

  Vehicle.Go ();

  When I compile it gives an error output.

  Error #2136: The SWF file file:///C|/Users/Ravenwind/Documents/Main.swf contains invalid data.

  in Vehicle / frame1)

  I'm stumped

  ' I don't then assign vehicle to document class box in the property ' Do not assign the vehicle that the document class... out of the way.

  In the main file, if you don't already create one, create a movieclip symbol (just draw a shape in there at the moment).  Right click on the symbol in the library and select the link.   In the interface that appears, select the export for Actionscript option and give it the class name "Vehicle" in the field labeled 'Class'

  Make sure that you save the file Vehicle.as once you put the code in it and have this file in the same folder as your Main.fla file.

  If you do the things that I just you describe should see an instance of movieclip, which cross the scene when you run the file.

• AIP-50055: error in the configuration file

  Hi all
  
  I defined a 850 doc in EDI X 12 on the Internet and I have defined an internal delivery channel to choose the file to a folder. After the deployment of the Setup, I get the error below and the file does not get picked up from this location.
  
  2009.02.05 to 05:36:46:017: B2BStarter wire: B2B - Error (ERROR) -: AIP-50055: error in the configuration file
  at oracle.tip.adapter.b2b.init.Repository.b2bEngineConfiguration(Repository.java:770)
  at oracle.tip.adapter.b2b.init.Repository.initialize(Repository.java:711)
  at oracle.tip.adapter.b2b.init.B2BServer.readRepository(B2BServer.java:451)
  at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:183)
  at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:298)
  at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:144)
  at java.lang.Thread.run(Thread.java:534)
  
  I even tried to make the configuration and restart the server. But still, it did not help.
  
  Please help me solve this problem.
  
  Kind regards
  Khli

  Hi khli,.

  It seems that the WalletLocation property is not available in tip.properties. Please provide it as necessary when the server starts

  Kind regards
  Dheeraj

• How do I run the .srt files in wmp 12

  original title: How do I run the .srt files this subtitle files in wmp 12 s? I downloaded directvobsub... but it isn't working...

  I bought a sony vaio e series laptop computer... I downloaded movies to watch and I'm interested to watch in vlc or other players, so I need to know how to watch movies with subtitles... Please help me

  my laptop i5 processor and it is x 64 bit...

  Hello, Sathyasheelan,

  HOW to: Watch movies and TV shows with subtitles

  http://hellboundbloggers.com/2010/06/03/watch-movies-and-TV-series-with-subtitles/

• Error 1335 the Cabinet file

  Hello

  When I install Microsoft Flight Simulator X, I get the error message 1603. But before I got this messase that I get an Error 1335 the Cabinet File "D1 ~ 10.CAB '.

  I copied all files from drive 1 and 2 on my hard drive and I still get the same message.

  Help, please

  Hello

  Cabinet (or CAB) is a file format to archive for Microsoft Windows that supports compression without loss of data and embedded digital certificates used to maintain the integrity of the archive. CAB files have .cab file name extensions.

  Install the game in the clean boot and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Can not run the executable file by LV7.1

  Hi all

  I'm surprised, I can't build and run the executable file LV7.1.

  I used to write a few vi with LV7.1 and built the executable according to these vi. It was no problem to build and run this executable file at that time. Now I can open these vi well with LV7.1, bu I can't run this executable file, it will be a mistake, please refer to the attachment. I'm trying to compile an executable file according to a simple vi, and then I can't run this exe file much more.

  Can you help me solve this problem? Thank you in advance.

  Evan

  @Christian: this is not correct.

  One of the reasons to do this is if LV 7.1.1 is installed, and then you install an application, including the runtime engine built in 7.1. It corrupts the execution engine.

  See here: http://digital.ni.com/public.nsf/allkb/680E61A4D02158A186256F7A0073C228

  Daniel

• How can I save xml file n, run the xml file? Please help me

  How can I save xml file n, run the xml file? Please help me

  Hello

  The question you have posted will be well suited in the MSDN forum. Click on the link below.

  http://social.msdn.Microsoft.com/forums/en/categories/

  In the meantime, I suggest you to return the item mentioned below.

  How to use XML Notepad to create an XML document

  http://support.Microsoft.com/kb/296560

• I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  Hi William,.

  Welcome to the Microsoft community.

  Batch file is a type of script file, a text file, containing a series of commands to be executed by the command prompt. When you run a batch file, it opens the command prompt to run the scripts.

  It would be great if you can answer the following questions:

  1. what happens when you try to run a batch file?

  2 are. what batch file you referring?

  3. the problem occurs for a particular batch file?

  First of all, I suggest you to check the commands written in a batch file. To do the same thing, just right-click on the batch file, and then click change. It will open Notepad with the list of orders scripted for this particular batch file.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Run the local file after AnyConnect establishes a connection

  We have recently installed a pair of ASA 5525 and ran into a feature that was present on our old Juniper VPN solution that I can't read on the ASAs with AnyConnect news.  With the old solution when the VPN client on the computer of a user connected to the network, we would launch a program on the machine which would then map user share directories and printers - is there a similar solution with the installation of ASA\AnyConnect?  There is a batch file that is present in the same place on each of the assets of the company might be called to run this program, I just can't find a way to run the batch file, if possible.

  A solution to the issue is to have AnyConnect start before the connection of the user, then the program runs when the user opens a Windows session, but I would avoid this scenario if possible - I don't want AnyConnect launch before user logon.

  For any idea or suggestion would be greatly appreciated.

  Thank you.

  Paul

  Yes, this feature exists in anyconnect.

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

• Run the .bat file using fileObj.execute () showing the result by completely removing the lines of code in extend script?

  Hi guys

  I created a dynamic .bat file created inside java and copy it to a location and managed through fileObj.execute ();

  Example of

  -------------------

  var line1 = 'some code ";

  var line2 = 'some code ";

  myCode var = line 1 + line 2;

  
  

  var myFileC = new file

  myFileC.open ('w');

  myFileC.write (myCode);

  myFileC.copy ("some location\file.bat");

  myFileC.close ();

  Run the .bat file

  batFile var = new file ("of the location\file.bat");

  batFile.execute ();

  Now .bat file is successfully executed but the content of this file created bat shows up to extend in script by removing all my code above...

  I have to cancel to do back whenever I run and sometimes accidentally I saved it lose all the code.

  can someone help with this problem?

  Simply change it to this:

  var myFileC = new File ("some location\file.bat");

  myFileC.open ('w');

  myFileC.write (myCode);

  myFileC.close ();