ERROR START DBCONSOLE

Similar Questions

• Re: Error starting Dbconsole, Oracle 11 g R2

  OK... but how? I don't know how to do... Please if you know... .or someone knows... Please tell me how to solve this problem.

  Here's a little more information

  Microsoft Windows [Version 6.1.7600]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32 > emctl config agent getTZ

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  America/Rio_Branco

  and my Tz system is UTC + 5 Islamabad/Karachi

  How to make compitable?

  Thanks in advance

  Post edited by: AdnanAhmadKhan

  My problem is solved, it is Possible in two ways:

  (1) find your time zone Oracle 11 G in my case it was

  C:\Windows\System32>emctl config agent getTZ

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  America/Rio_Branco

  Then set your zone system on a zone schedule schedule compitable.

  As I have mine in America/Santiago

  and then restart your system.

  After the reboot, check your dbconsole, it should be in working condition

  (2) use the command ResetTZ

  C:\Users\Ahmad>emctl resetTZ agent

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Update C:\app\Ahmad\product\11.2.0\dbhome_1/localhost_orcl/sysman/config/emd.p

  TECHNIC...

  C:\app\Ahmad\product\11.2.0\dbhome_1/localhost_orcl/sysman/ updated successfully

  config/EMD. Properties.

  Log in as the user of the em repository and run the script:

  exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  and commit the changes

  This can be done for example by connecting to sqlplus and making

  SQL > exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  SQL > validation

  It will Pick Up of your system time zone and then you have to do a little more work,

  C:\>sqlplus/NoLog

  SQL * more: Production of release 11.2.0.1.0 Fri Oct 25 13:02:36 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  SQL > connect / as sysdba

  Connected.

  SQL > exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  PL/SQL procedure successfully completed.

  SQL > validation

  2

  Now Yout TZ is set

  You can start your Dbconsole by issuing the command Start

• Error 11 GR 2 emctl start dbconsole

  I just installed database 11 GR 2. I installed with the manual option, no database created in the first place. I created the database manually already and already ran two scripts that create the data dictionary elements, etc.. I could start the instance and open the database successfully.
  
  But when I try to run the following command to start the dbconsole for enterprise manager, I get these errors. I understand that I must issue the full command, including the... part 'start dbconsole', but simply out of curiosity has also run the command without this part.
  I checked and I have place in the following directory:
  /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole
  
  but not the... localhost... part mentioned in the error message.
  
  What's not here? How to solve this?
  
  These are the errors displayed in each case...
  
  running the command complete...
  
  [oracle@localhost ~] $ emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_localhost.localdomain_orcl not found.
  
  running only the command emctl...
  
  [oracle@localhost ~] $ emctl
  The MA Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/localhost.localdomain_orcl not found.
  
  Published by: GabyPR on May 11, 2012 20:22

  Also, your SYSTEM's storage space is full - expand the existing data file or add a new data file to the repository

  >
  ...
  ORA-01653: unable to extend the table SYS. SYN$ 8 in the SYSTEM tablespace
  ...
  >

  HTH
  Srini

• error emctl start dbconsole

  Hi friends,
  
  I start my OEM services that are the ff.
  

  home/oracle/OracleHomes/agent10g/bin/emctl start agent
  /home/oracle/OracleHomes/oms10g/opmn/bin/opmnctl startall
  /home/oracle/OracleHomes/oms10g/bin/emctl start iasconsole
  /home/oracle/OracleHomes/oms10g/bin/emctl start oms

  The program above runs correctly.
  But the following error:

  /home/oracle/OracleHomes/agent10g/bin/emctl start dbconsole
  Unable to locate web application configuration from .

  Or if I use the emctl under the House SGD:

  home/oracle/OracleHomes/oms10g/bin/emctl start dbconsole
  OC4J Configuration issue. /home/oracle/OracleHomes/oms10g/oc4j/j2ee/OC4J_DBConsole not found.

  How to solve this please...
  
  Thank you very much
  
  Ms. K

  Hello

  In case of GRID, there is no need to start dbconsole, and even that is not taken care...

  Concerning
  Rajesh

• error starting Oracle Enterprise manager

  I have oracle database 11 g 2 on windows 7, when I want to launch the Enterprise Manager, the following error: Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    C:\Users\SHOJAIE>emctl start dbconsole Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved. https://SHOJAIE-PC:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...System error 5 has occurred.  Access is denied.

  check if the services oracle is up and running, also export ORACLE_SID, ORACLE_HOME and ORACLE_BASE and try again.

  new error?

• 11g - emctl start dbconsole fails

  I have a server that is running OEL 6 64-bit. I installed the 11.2.0.3 Patch Set 2 database. The installation of the database has gone well except for that I can't start the dbconsole.
  
  "emctl start dbconsole" error
  
  I look in the logs located in - /u01/app/oracle/product/11.2.0/db_1/host.domain.com_orcl/sysman/log
  
  First, I look at emdctl.trc and see:
  2012-06-12 09:14:42, 566 ERROR Thread-403838720 hand: nmectla_agentctl: error connecting to the https://olympia.glasfloss.com:3938/emd/main. Return status code
  
  I figure above error is perhaps the result of rather than a cause, so I go to emdb.nohup and see the following:
  
  The most relevant appears to be-
  
  -Tue Jun 12 09:10:41 2012::tzOffset to - 06:00-360 (min), but agent is runnning with tzOffset-300 (min)
  -----
  -Tue Jun 12 09:10:41 2012::trying again after a wait of 1 second to account for the transition from the light of day
  -----
  -Tue Jun 12 09:10:41 2012::tzOffset to - 06:00-360 (min), but agent is runnning with tzOffset-300 (min)
  -----
  -Tue Jun 12 09:10:42 2012::Mismatch detected between the time zone in env (U.S. / Central) and /u01/app/oracle/product/11.2.0/db_1/host.domain.com_orcl/sysman/config/emd.properties (-06:00). Forcing value to...-
  
  
  My OS time is correct
  
  No. date + %z # name of the zone
  product
  -0500
  
  Date
  Kill Jun 12 10:07:17 CDT 2012
  
  It's OK for me since we are in the Central time zone
  
  
  so is this the dbconsole which is misconfigured? did I miss a patch? is the problem with the agent instead?

  Hello

  Have you tried the following:

  #> emctl config agent upadateTZ
  #> emctl resetTZ agent
  #> emctl reload agent
  #> emctl start agent 
  

  Jan S.

• OC4J configuration problem when I start dbconsole!

  Dear all,
  
  I installed Oracle 11 GR 1 material on Linux OS. Installation is complete, the database manager, auditor and the company worked very well.
  
  for some configurations I had to change the hostname of localhost.localdomain to my requested name.
  
  Now, when I try to start dbconsole using emctl start dbconsole, I get the following error:
  
  OC4J Configuration problem. / OC4J_DBConsole_computer_name not found.
  
  Kindly help with this problem.
  
  Kind regards
  Imran

  You're probably on a dhcp-based system. You must ensure that the correct setting of the intellectual property is in the file/etc/hosts. The problem is that your db to any host name console has been made, its not available anymore. See the following page for the EM database troubleshooting,

  http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.php

  HTH
  Aman...

• Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW FPGA.

  Please help me for this problem "error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the setup of LabVIEW FPGA.»

  Look for the error on the Web site of or or on the forums. Take a look at the following links:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=381394&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=205754&requireLogin=false

• My computer guard turn off at startup; error starting Windows. Could someone help me please?

  Hello

  I have an Emachine, which is about three years old. We take good care of it, look at what we download and perform analyses of virus frequently a week. But for the last two or three weeks every time we start our computer, it takes a few times before he can actually get into Windows because it maintains power off. When he died, and we turn it back on, the computer goes to the screen if you want to put it in safe mode or start Windows normally, because there was an error starting. The computer offers the possibility to try and correct the error, but sometimes it is remedial and it still happens or it goes into repair mode and powers off the coast.

  We downloaded and installed the System Mechanic (the latest version), hoping that it could detect errors in the disk hard because we heard good things about the program. Unforunately after installation and with us the program running, he finds errors in all of the computer, but after you power on your computer and leave it alone for a few hours and turn on again, the problem comes back right to the top. From a logical point of view, we think it could be either an error on the HDD causing constantly turning the computer off, there might be a virus in the Startup Repair which is not find and fix the problem or there might be something wrong with the power supply by to short circuit and power off.

  Nine times out of ten once the computer is turned on, you can even say that there is a problem to be with, because everything works well. We have some important information about the computer is harmful that we can find and fix the problem.

  Thanks a lot for your time!

  Cory

  Hello

  ·          When the issue started?

  Step 1: Disconnect any external devices and try to start the computer.

  Step 2: Check if the computer starts in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See also: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Error starting 3

  original title: error starting

  My computer just started this doing. any ideas on how to solve this problem?  with 3 error loading key

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error starting "appName": Module "appName" is trying to access a secure API

  Dear all,

  I downloaded a few applications in the app world. When I try to install on the device, there is an error "error starting Sunfish6: Module 'Sunfish6' trying to access a secure API. I tried to update the files, he needs, but still get the same error message. What is the cause of the appearance of the error message? I developed this application using phonegap and blackberry webwork framework.

  Thanks & best regards.

  In the eclipse webworks menu, select project-> BlackBerry-> sign with Signature tool.

  Then upload the generated files.

• Error starting FreeLoader: Module 'KxmlLib' not found.

  The message "Error Starting FreeLoader: Module"KxmlLib"not found." what do I get when I try to run my application on a BB device.  In the Simulator, it does very well.    KxmlLib is a library to the library (preverified) BlackBerry project kXML 2 . The KxmlLib project is a project of the library without the source, just the pre-audit jar files and in the KxmlLib properties > Java Build Path > libraries a pre-audit jar and Properties KxmlLib > Java Build Path > order and export has the JAR checked for export.  I guess it's okay.

  After that it got a little hairy, I had to the the KxmlLib of the project a dependency of my application of FreeLoader project, run it on the simular to produce the KxmlLib JAR in the deliverables of the project KxmlLIB directory.  I removed the dependency of the project KxmlLib , copied from the KxmlLib.jar in the project space of the FreeLoader , right click on it project and added to the build path.

  Applications of freeLoader compiles and runs without any error of security on the Simulator.  When I try to package and run it on the device of BB, it fails.   Clues?  I browsed this forum before I asked - I solved all my other problems during development with the help of this community and the RIM fanastic.  Thank you very much!

  Brandon

  You will find that there is a cod associated with your pot of KxmlLib.  There is no end to your device unless you deliberately include in your distribution.  You may be signed too.

• Using new plugin error: error starting module. Of verification errors.

  I use eclipse Galileo and the latest version of the plugin.

  I created a project, and I was able to debug it about 50 or so times. After that, I can't run the project on the Simulator again. He complains saying this:

  Starting MiApp
  Module 'MiApp' has verification errors.Error starting MiApp: Module 'MiApp' has verification errors.
  

  These errors do not appear before, and I have not changed anything. Attempted to restart eclipse, own Simulator, recompile, but nothing works.

  MiApp is a UiApplication who uses a library module. The library is located in the debug settings.

  I have read the famous document on how to avoid mistakes review and none of the points worked. In fact, my application is not a MIDlet.

  I spent several hours (which I would have spent on development) without success, and I'm going back to the old plugin. This new one really sucks.

  I'm sorry it's late for that. He took 20 minutes to move the project to the old plugin environment, but invested much more although the two hours I spent playing with the new plugin and the search for the light in this forum and knowledge base.

  Now it works perfect, as expected.

  The old platform (eclipse 3.4 and plugin 1.0.0.67) is much more stable and easy to use.

• Error starting MyApplication

  Hello

  Because I developed application on the Simulator and it worked fine.

  Now, I downloaded the application for device via OTA and tried to run the application but I have error like below.

  ------------------

  Error starting Module MyApplication 'MyApplication' tries to access a secure API.

  ------------------

  Should that code signing? or another problem?

  Thank you

  DK.

  Yes.  Your application requires code signing.

  See the Javadoc for the API you are using.  It will include the following message from the not-so-friendly:

  Category: Signed: This item is only available to signed clients. If you intend to use this item, please contact RIM to establish the necessary agreements that will allow you to have your signed COD files. Signature is required for use on the device, as part of the JDE development may occur without signing the Cod.

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)