11g - emctl start dbconsole fails

Similar Questions

• emctl start dbconsole starts not (11.2.0.3)

  Hi all

  11.2.0.3

  AIX 6.1

  We restore the backup if our database to a new server with the same characteristics.

  The database is now ok, but when I tried to start emctl:

  ServeurOracle: / home/oracle > emctl start dbconsole

  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.

  How can I configure my emctl again?

  Help, please...

  Thank you

  pK

  Yes - check the docs

  Management of Oracle Enterprise Manager Database Control

  Management of Oracle Enterprise Manager Database Control

• Error 11 GR 2 emctl start dbconsole

  I just installed database 11 GR 2. I installed with the manual option, no database created in the first place. I created the database manually already and already ran two scripts that create the data dictionary elements, etc.. I could start the instance and open the database successfully.
  
  But when I try to run the following command to start the dbconsole for enterprise manager, I get these errors. I understand that I must issue the full command, including the... part 'start dbconsole', but simply out of curiosity has also run the command without this part.
  I checked and I have place in the following directory:
  /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole
  
  but not the... localhost... part mentioned in the error message.
  
  What's not here? How to solve this?
  
  These are the errors displayed in each case...
  
  running the command complete...
  
  [oracle@localhost ~] $ emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_localhost.localdomain_orcl not found.
  
  running only the command emctl...
  
  [oracle@localhost ~] $ emctl
  The MA Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/localhost.localdomain_orcl not found.
  
  Published by: GabyPR on May 11, 2012 20:22

  Also, your SYSTEM's storage space is full - expand the existing data file or add a new data file to the repository

  >
  ...
  ORA-01653: unable to extend the table SYS. SYN$ 8 in the SYSTEM tablespace
  ...
  >

  HTH
  Srini

• error emctl start dbconsole

  Hi friends,
  
  I start my OEM services that are the ff.
  

  home/oracle/OracleHomes/agent10g/bin/emctl start agent
  /home/oracle/OracleHomes/oms10g/opmn/bin/opmnctl startall
  /home/oracle/OracleHomes/oms10g/bin/emctl start iasconsole
  /home/oracle/OracleHomes/oms10g/bin/emctl start oms

  The program above runs correctly.
  But the following error:

  /home/oracle/OracleHomes/agent10g/bin/emctl start dbconsole
  Unable to locate web application configuration from .

  Or if I use the emctl under the House SGD:

  home/oracle/OracleHomes/oms10g/bin/emctl start dbconsole
  OC4J Configuration issue. /home/oracle/OracleHomes/oms10g/oc4j/j2ee/OC4J_DBConsole not found.

  How to solve this please...
  
  Thank you very much
  
  Ms. K

  Hello

  In case of GRID, there is no need to start dbconsole, and even that is not taken care...

  Concerning
  Rajesh

• Cannot start dbconsole - OC4J Configuration problem

  We have a physical database ensures 11 g 2. I tried to start OEM but failed

  [oracle@cchordrdb bin]$ emctl start dbconsole
  OC4J Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee/OC4J_DBConsole_cchordrdb_cchdr not found.

  I checked the u01/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee file. File OC4J_DBConsole_cchordrdb_cchdr is not there. How to create this file?

  It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard. This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.
  Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features).

  You can also refer to the MOS score:

  * How - to set up control data for a waiting logical or physical base [ID 315116.1] *.

  However, you can use OEM Grid control. Enterprise Manager Grid Control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/concepts.htm#sthref120

  Concerning
  Rajesh

  Published by: Rajesh on August 20, 2010 12:47

• ERROR START DBCONSOLE

  Hi all

  When I try to start my dbconsole em, I get the following error:

  emctl start dbconsole

  OC4J Configuration problem. /U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE/OC4J_DBConsole_suse_orcl not found.

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1 >

  I don't know what the issue is, as the database is started and running.

  Any advice?

  Thank you very much.

  user8786417 wrote:

  Hi guys,.

  My apologies, I didn't know that links may be blocked.

  Please see output terminal:

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE > export ORACLE_UNQNAME = orcl

  -bash: export: '=': an identifier not valid

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE > export ORACLE_HOSTNAME = suse

  -bash: export: '=': an identifier not valid

  output of LS - ltr:

  users of db11g drwxr-xr-x 5 4096 2011-08-08 09:26 OC4J_Workflow_Management_Container

  users of db11g drwxr-xr-x 5 4096 2011-08-08 09:26 OC4J_Workflow_Component_Container

  drwxr-x - 6 db11g users 4096 2011-08-08 09:26 OC4J_DBConsole

  users of db11g drwxr-xr-x 3 4096 2011-08-08 09:26 oc4j_applications

  users of db11g drwxr-xr-x 2 4096 2011-08-08 09:29 utility

  users of db11g drwxr-xr-x 14 4096 2011-08-08 09:30 reception

  -rw - r - r - 1 db11g users 997 2011-08-08 09:34 deploy_db_wf.ini

  drwxr-x - 10 users 4096 db11g 2011-08-08 15:25 OC4J_DBConsole_SUSE_orcl

  Thank you.

  do you not understand that * NIX is CaSeSenSiTive?

  ': SUSE "differs from"suse "!

  display the results of commands OS below

  host name

  uname - a

  cat/etc/hosts

• do not start dbconsole on the new database duplicate

  11.1.0.6 running. I managed rman duplicate a basic data, but when I then raise dbconsole who does not like shown below:
  
  export ORACLE_SID = gag
  emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/Db_1/OC4J/J2EE/OC4J_DBConsole_sthbkdev.JRPG.BEA.com_badkar not found.
  
  What is the solution to this problem?

  The name of host/IP probably changed, so you must recreate the dbconsole:

  export oracle_sid=
  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

• OC4J configuration problem when I start dbconsole!

  Dear all,
  
  I installed Oracle 11 GR 1 material on Linux OS. Installation is complete, the database manager, auditor and the company worked very well.
  
  for some configurations I had to change the hostname of localhost.localdomain to my requested name.
  
  Now, when I try to start dbconsole using emctl start dbconsole, I get the following error:
  
  OC4J Configuration problem. / OC4J_DBConsole_computer_name not found.
  
  Kindly help with this problem.
  
  Kind regards
  Imran

  You're probably on a dhcp-based system. You must ensure that the correct setting of the intellectual property is in the file/etc/hosts. The problem is that your db to any host name console has been made, its not available anymore. See the following page for the EM database troubleshooting,

  http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.php

  HTH
  Aman...

• Starting test FAILED - HP ENVY 1191-NR

  Hey guys/girls,

  New to the forum - need some tech support.  I have a HP ENVY3D 1191-NR running Windows 7.  He recently began closing before you start completely.  I ran a Test at startup and for the following results:

  Memory test: FAILED

  FAILURE ID: QE40XL-5GE6G4-XD0141-400103

  PRODUCT ID: YL748UA #ABA

  Memory module

  Starting test: FAILED

  I wonder if that means the RAM of the computer has gone wrong and I need to replace, or else... ?

  Thanks in advance to all.

  Hello:

  Yes, that could indicate a possible memory module failure.

  What I would do is unplug the PC and remove the battery.

  If the laptop has two memory modules, remove one of them and plug the power adapter.

  See if the PC starts and works normally.

  If so, unplug the adapter, remove the other memory module, put in the first one you took, connect the a/c adapter and see what's the result.

  If the PC does not start, you have isolated the bad chip and you can just buy a new one with the same characteristics.

  If the PC is still under warranty, contact HP for a replacement.

• Installed 11g XE, started ok, sqlplus access ok, but APEX does not

  Installed 11g XE, started ok, sqlplus access ok, firewall 8080, 1521, 2030, ports open but no access to http://localhost: 8080/apex/f? p = 4950
  
  I did a query "select current_date double" of sqlplus using sys as sysdba and the result is ok.
  I started the database twice more startdb.bat lnk.
  I checked that the Oracle Services are ok and running.
  I tried to shutdown windows firewall.
  I restarted windows.
  I use windows xp Prof sp3, browser chrome and admin account.
  
  I can see in the forum that other users are in the same situation as me.
  
  Published by: tecnica24 on sep/04/2011 11:18

  Please open the papers in app\oracle\product\11.2.0\server\config\log\ and verify that no errors have appeared during the installation/creation.

• Re: Error starting Dbconsole, Oracle 11 g R2

  OK... but how? I don't know how to do... Please if you know... .or someone knows... Please tell me how to solve this problem.

  Here's a little more information

  Microsoft Windows [Version 6.1.7600]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32 > emctl config agent getTZ

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  America/Rio_Branco

  and my Tz system is UTC + 5 Islamabad/Karachi

  How to make compitable?

  Thanks in advance

  Post edited by: AdnanAhmadKhan

  My problem is solved, it is Possible in two ways:

  (1) find your time zone Oracle 11 G in my case it was

  C:\Windows\System32>emctl config agent getTZ

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  America/Rio_Branco

  Then set your zone system on a zone schedule schedule compitable.

  As I have mine in America/Santiago

  and then restart your system.

  After the reboot, check your dbconsole, it should be in working condition

  (2) use the command ResetTZ

  C:\Users\Ahmad>emctl resetTZ agent

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Update C:\app\Ahmad\product\11.2.0\dbhome_1/localhost_orcl/sysman/config/emd.p

  TECHNIC...

  C:\app\Ahmad\product\11.2.0\dbhome_1/localhost_orcl/sysman/ updated successfully

  config/EMD. Properties.

  Log in as the user of the em repository and run the script:

  exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  and commit the changes

  This can be done for example by connecting to sqlplus and making

  SQL > exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  SQL > validation

  It will Pick Up of your system time zone and then you have to do a little more work,

  C:\>sqlplus/NoLog

  SQL * more: Production of release 11.2.0.1.0 Fri Oct 25 13:02:36 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  SQL > connect / as sysdba

  Connected.

  SQL > exec mgmt_target.set_agent_tzrgn('localhost:3938','America/Santiago')

  PL/SQL procedure successfully completed.

  SQL > validation

  2

  Now Yout TZ is set

  You can start your Dbconsole by issuing the command Start

• Starting test failed

  I have a HP Pavilion g4-1125DX with Windows 7. A few days ago while I was downloading the files that it hung. I was able to move the cursor, but could not close the browser window, nor could I stop him. I push the power button down for a few seconds for a hard stop, when I tried to connect the system to the top it wouldn't boot Windows. He gave me several options to save and I tried to perform a restore of Windows, which did not work, tried to start it in safe mode and still have the same error, I gave up trying to save my files that I have most of them supported anyway if I tried to perform a full recovery of the system to the factory settings. He went through the process of recovery worldwide and says that it is successful. When I tried to reboot after recovery, he hung up on the trunk again. He didn't try to make me the same recovery menu. He just hung. I tried another hard stop and restart to get to the HP Advanced System Diagnostics and tried the start-up Test and he FAILED.

  He gave me the FAILURE ID: M4H27W-5NR5SC-MFPV5G-60UQ03.  I don't know what to do with this information. I need help. I just want to get this thing back operational.

  Thank you.

  Hi, LBG,.

  An error 303 is a failure of the short drive self-test and definetely suggested that tough is a failure.

  As your laptop is still under warranty, contact HP by simply using the relevant link below and make arrangements for the disk needs to be replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP ENVY laptop - 15-k101nx: HP envy 15 does not start after failing to set up

  Failed to configure Windows (it took so long and shows no percentage) so I turned off my laptop, removed and unremoved battery and turned on it. The problem is it does not start and the screen is all black with little light on it.

  What I've done so far:

  -J' tried to restore the BIOS by following the instructions here say: http://support.hp.com/ee-en/document/c02693833 ; However, I still have the same problem after restoring the BIOS.

  -J' also tried a few hardware diagnostic test, he failed in the test of ' disk hard short dst check "and gave me chess and product IDS.
  -He also failed in the Startup Repair tool

  My laptop is still covered with warranty accdg here 'http://h10025.www1.hp.com/ewfrf/wc/weInput?lc=en&dlc=en&cc=us&tmp_weCountry=&tmp_weSerial=&tmp_wePro... '. but the characters upon receipt of my laptop is already melted aways since they are written on a thermal paper.

  BTW, I can always open the command prompt and the research on the C: drive and see my files, but don't know what to do whenever I used the chkdisk command, it asks me to do things I'm not familiar with.  I just heard that the chkdisk command solves the problem temporarily.
  
  What do you think are the alternatives and solutions to the problem of my laptop?

  Yes the hard drive needs to be replaced. Just call support and they will have it replaced for you under warranty.

• starting system failed at checkpoint [USBd]

  Fact a reboot after upgrade to Office 2000 to 2003 and the screen froze with a blinking cursor in the dark.

  F2, F11 or F12 does nothing.

  Ctrl + alt + tab produces a momentary vision of the start screen and changes to a black screen with the message: «...» "Previous attempts to start this system have failed at checkpoint [USBd]... »

  I need help to get back on the pc. (Dell Dimension 2400 Series, version of the Bios A02), Win XP.

  Hi Befudd,

  We are happy to know that your computer works as expected. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Start-up failed, cannot fix, no restart of drives available

  PC HP with Vista. Will not start. Installed recovery options failed and no reboot disk available. All downloadable options which can be copied and used in the option "reboot with the disk?

  Hello

  I suggest that get you in touch with HP for better help.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]