error emctl start dbconsole

Similar Questions

• Error 11 GR 2 emctl start dbconsole

  I just installed database 11 GR 2. I installed with the manual option, no database created in the first place. I created the database manually already and already ran two scripts that create the data dictionary elements, etc.. I could start the instance and open the database successfully.
  
  But when I try to run the following command to start the dbconsole for enterprise manager, I get these errors. I understand that I must issue the full command, including the... part 'start dbconsole', but simply out of curiosity has also run the command without this part.
  I checked and I have place in the following directory:
  /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole
  
  but not the... localhost... part mentioned in the error message.
  
  What's not here? How to solve this?
  
  These are the errors displayed in each case...
  
  running the command complete...
  
  [oracle@localhost ~] $ emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_localhost.localdomain_orcl not found.
  
  running only the command emctl...
  
  [oracle@localhost ~] $ emctl
  The MA Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/localhost.localdomain_orcl not found.
  
  Published by: GabyPR on May 11, 2012 20:22

  Also, your SYSTEM's storage space is full - expand the existing data file or add a new data file to the repository

  >
  ...
  ORA-01653: unable to extend the table SYS. SYN$ 8 in the SYSTEM tablespace
  ...
  >

  HTH
  Srini

• 11g - emctl start dbconsole fails

  I have a server that is running OEL 6 64-bit. I installed the 11.2.0.3 Patch Set 2 database. The installation of the database has gone well except for that I can't start the dbconsole.
  
  "emctl start dbconsole" error
  
  I look in the logs located in - /u01/app/oracle/product/11.2.0/db_1/host.domain.com_orcl/sysman/log
  
  First, I look at emdctl.trc and see:
  2012-06-12 09:14:42, 566 ERROR Thread-403838720 hand: nmectla_agentctl: error connecting to the https://olympia.glasfloss.com:3938/emd/main. Return status code
  
  I figure above error is perhaps the result of rather than a cause, so I go to emdb.nohup and see the following:
  
  The most relevant appears to be-
  
  -Tue Jun 12 09:10:41 2012::tzOffset to - 06:00-360 (min), but agent is runnning with tzOffset-300 (min)
  -----
  -Tue Jun 12 09:10:41 2012::trying again after a wait of 1 second to account for the transition from the light of day
  -----
  -Tue Jun 12 09:10:41 2012::tzOffset to - 06:00-360 (min), but agent is runnning with tzOffset-300 (min)
  -----
  -Tue Jun 12 09:10:42 2012::Mismatch detected between the time zone in env (U.S. / Central) and /u01/app/oracle/product/11.2.0/db_1/host.domain.com_orcl/sysman/config/emd.properties (-06:00). Forcing value to...-
  
  
  My OS time is correct
  
  No. date + %z # name of the zone
  product
  -0500
  
  Date
  Kill Jun 12 10:07:17 CDT 2012
  
  It's OK for me since we are in the Central time zone
  
  
  so is this the dbconsole which is misconfigured? did I miss a patch? is the problem with the agent instead?

  Hello

  Have you tried the following:

  #> emctl config agent upadateTZ
  #> emctl resetTZ agent
  #> emctl reload agent
  #> emctl start agent 
  

  Jan S.

• emctl start dbconsole starts not (11.2.0.3)

  Hi all

  11.2.0.3

  AIX 6.1

  We restore the backup if our database to a new server with the same characteristics.

  The database is now ok, but when I tried to start emctl:

  ServeurOracle: / home/oracle > emctl start dbconsole

  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.

  How can I configure my emctl again?

  Help, please...

  Thank you

  pK

  Yes - check the docs

  Management of Oracle Enterprise Manager Database Control

  Management of Oracle Enterprise Manager Database Control

• ERROR START DBCONSOLE

  Hi all

  When I try to start my dbconsole em, I get the following error:

  emctl start dbconsole

  OC4J Configuration problem. /U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE/OC4J_DBConsole_suse_orcl not found.

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1 >

  I don't know what the issue is, as the database is started and running.

  Any advice?

  Thank you very much.

  user8786417 wrote:

  Hi guys,.

  My apologies, I didn't know that links may be blocked.

  Please see output terminal:

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE > export ORACLE_UNQNAME = orcl

  -bash: export: '=': an identifier not valid

  DB11G@SUSE:/U02/app/DB11G/product/11.2.0.1/Db_1/OC4J/J2EE > export ORACLE_HOSTNAME = suse

  -bash: export: '=': an identifier not valid

  output of LS - ltr:

  users of db11g drwxr-xr-x 5 4096 2011-08-08 09:26 OC4J_Workflow_Management_Container

  users of db11g drwxr-xr-x 5 4096 2011-08-08 09:26 OC4J_Workflow_Component_Container

  drwxr-x - 6 db11g users 4096 2011-08-08 09:26 OC4J_DBConsole

  users of db11g drwxr-xr-x 3 4096 2011-08-08 09:26 oc4j_applications

  users of db11g drwxr-xr-x 2 4096 2011-08-08 09:29 utility

  users of db11g drwxr-xr-x 14 4096 2011-08-08 09:30 reception

  -rw - r - r - 1 db11g users 997 2011-08-08 09:34 deploy_db_wf.ini

  drwxr-x - 10 users 4096 db11g 2011-08-08 15:25 OC4J_DBConsole_SUSE_orcl

  Thank you.

  do you not understand that * NIX is CaSeSenSiTive?

  ': SUSE "differs from"suse "!

  display the results of commands OS below

  host name

  uname - a

  cat/etc/hosts

• OC4J configuration problem when I start dbconsole!

  Dear all,
  
  I installed Oracle 11 GR 1 material on Linux OS. Installation is complete, the database manager, auditor and the company worked very well.
  
  for some configurations I had to change the hostname of localhost.localdomain to my requested name.
  
  Now, when I try to start dbconsole using emctl start dbconsole, I get the following error:
  
  OC4J Configuration problem. / OC4J_DBConsole_computer_name not found.
  
  Kindly help with this problem.
  
  Kind regards
  Imran

  You're probably on a dhcp-based system. You must ensure that the correct setting of the intellectual property is in the file/etc/hosts. The problem is that your db to any host name console has been made, its not available anymore. See the following page for the EM database troubleshooting,

  http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.php

  HTH
  Aman...

• Cannot start dbconsole - OC4J Configuration problem

  We have a physical database ensures 11 g 2. I tried to start OEM but failed

  [oracle@cchordrdb bin]$ emctl start dbconsole
  OC4J Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee/OC4J_DBConsole_cchordrdb_cchdr not found.

  I checked the u01/app/oracle/product/11.2.0/dbhome_1/oc4j/j2ee file. File OC4J_DBConsole_cchordrdb_cchdr is not there. How to create this file?

  It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard. This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.
  Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features).

  You can also refer to the MOS score:

  * How - to set up control data for a waiting logical or physical base [ID 315116.1] *.

  However, you can use OEM Grid control. Enterprise Manager Grid Control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/concepts.htm#sthref120

  Concerning
  Rajesh

  Published by: Rajesh on August 20, 2010 12:47

• Error at startup dbconsole on Enterprise Manager (Oracle 11 g)

  We copied the directory structure of database from one server to another to duplicate a database and its instance. The instance rises, the listener starts, but the dbconsole Enterprise Manager does not start. You enter emctl start dbconsole, I get... From... followed many points and the word 'failed '.
  
  I found this post on the emdctl.trc file and also some newspapers.
  
  Common = 'aglpsmim107.r1 - core.r1.aig .net' name does not Match Hostname = 'agldsmim108.r1 - core.r1.aig .net '.
  
  I searched in vain to find out where he picked up the 'common name', so I change to the new server, (the common name is the old server, and)
  the host name is the new server). I found emd.properties and changed all occurrences of the name of the server it. I even restarted Afterword to see if this
  helps, but I still get the same result.
  
  Can someone help me?
  
  Thank you
  Tony Huddleston

  Oracle has a procedure for what is documented at http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#CIACCEHB

  I found this procedure by typing
  Reconfigure the database control

  at http://tahiti.oracle.com

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• do not start dbconsole on the new database duplicate

  11.1.0.6 running. I managed rman duplicate a basic data, but when I then raise dbconsole who does not like shown below:
  
  export ORACLE_SID = gag
  emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/Db_1/OC4J/J2EE/OC4J_DBConsole_sthbkdev.JRPG.BEA.com_badkar not found.
  
  What is the solution to this problem?

  The name of host/IP probably changed, so you must recreate the dbconsole:

  export oracle_sid=
  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

• C000021a error: {fatal system error} when starting laptop PC M30 series

  I get the following error when starting my laptop.

  "Stop: c00021a {fatal system error} the windows logon system process ended unexpectedly with status 0 x 00000080 (0x00000000 0x00000000).
  The system was stopped.

  I have the CD of restoration at the time of purchase. I have some data I need to recover. If someone knows the resolution of this problem, please let me know the procedure.

  Thanking you in advance.
  -YG

  Hello

  I found an interesting page. Please check all the solutions mentioned on this page. http://www.eggheadcafe.com/NG/Microsoft.public.WindowsXP.accessibility/post652591.asp

  Good luck!

• Error on starting the PC

  Hello
  I get the following error when starting my PC. I only started getting this error since I upgraded my anti virus software. I installed all available updates and nothing seems to work.  I restarted the PC several times and have tried help and support but keeps it in the message that appears.
  Can someone help me on this?
  Thanks in advance

  WINDOWS DEFENDER
  «Failed to initialize: 0x800106ba.» A problem caused this program blocking. to start the service, restart your computer or search help and Support to find out how to start a service manually.

  Hi AdianoCreano,

  Please use the Forum of the community for Vista.

  What is your current antivirus?

  I wonder if she does not understand an antimalware tool. If so, there is the question. You cannot, or at least should not be two anti-malware programs that are running.

  If it's not her, please let us know.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error: "error cannot start fron CD-error 5."

  Original title: cannot restart from a cd

  Hello

  I'm trying to restart xp so that I can use a Norton recovery CD. However rebooting and pressing the prioritization boot from the windows cd comes up with "error cannot start fron CD-error 5."

  Any ideas?

  Thank you

  The disk you are trying to boot from was not burned correctly. You will not be able to boot from it.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Microsoft automated troubleshooting error attached start-up services has stopped working

  I would like someone from Microsoft to please solve this problem once and for all:

  "microsoft automated troubleshooting error attached start-up services has stopped working.

  I tried the fix and nothing works... Please help

  Hello

  Have you tried the steps in the Microsoft article that was provided in the previous post?

  Please meet us, so that we can assure you that the problem has been resolved or not.

  For more information, see this article: http://support.microsoft.com/kb/555375

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.