Error starting after installing sp2

Similar Questions

• Slow to start after installing SP2

  Hello

  I had this problem after istalling SP2 on my Toshiba M30. I istalled SP2 a few times before and uninstalled it is for this reason. The starting time is now about 2.5 min istead of 30 sec prior to installation. I have installed SP2 on a clean computer (removed spyware, cleaned the registry, defragment and so forth), followed by steps. But still the same. I have the loading machine about 1 min before it comes to wallpaper, before SP2, just after the sound of welcome he went at bottom of screen, icons and the bar and I was done. Now, his home, then 30-40 sec, then background screen and nothing for 1-1.2 minutes and then I get icons, bar and machine becomes operational. No one of my demons have this problem. Please, if anyone knows what to do - let me know. Thank you!

  Post edited by: ruarmani

  Hello

  Remember that SP2 installs additional firewall and security settings. It s all this entails loads initially. It takes several times.

  You can check the background processes and apps which start to run.
  It can be check in the msconfig. Type the command msconfig in the run window and check the Startup tab.

  The starting procedure takes a little more time on my laptop because the antivirus application that loads initially.

• Vista blue screen error: 0x0000c1f5 after installing SP2

  original title: vista crashed after installing updates from m$... will not start!

  After download sp 2, I have now the blue screen with the error 0x0000c1f5... cannot start somehow... tried everything... I read that if I inserted the windows installation disc 7 that it should start from there... can I do a download of it from microsoft and burn disc and install it? Operating system is basic Vista came installed on the new computer. 32 bit

  Hi bandibug,

  To solve your problem, try the steps mentioned in this document .

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error starting after installing vista sp2

  I have a dell latitude D830 running vista business 32-bit.
  Installed Windows vista sp2 update and now the computer will not boot.

  automactically goes to the Startup Repair, but still not access computers.

  Can anyone help me please with this problem?

  How can I access the hard disk to uninstall vista sp2 update.
  Would not lose information on computer...

  Any suggestions or ideas on what I can

  Thank you for using Microsoft Vista answers Forum!

  You can start your PC in safe? If you can, go ahead and uninstall the update SP2 via Control Panel > Windows Update > view update history , then select install updates. Right-click on the SP2 update and select uninstall

  How to start in safe MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Vista theme disappeared after installing SP2

  I updated vista 64 Service Pack 2 to allow the installation of ie9.  After installing sp2, my taskbar has been changed and the vista theme completely disappeared.  Areas of the screen are now much brighter, lighter or white (taskbar now is almost white and has the old style box 'Start').  I went in the 'appearance' of the control panel section and searched the vista theme - it's gone.  Installation of task bar that I had before the sp2 update is missing.  How can I get that back?  I tried to remove and reinstall sp2 and restore to earlier date and put it back - no matter what I do the screwed up theme with no option to get the old back.  Everything else works fine.  How to bring back the task of vista bar/color theme?  Is there a file I can load up?  I'm tired of wasting time of uninstallation/reinstallation.  We don't like also how change is so brilliant screen - and we do not find a way to change that either - there is no manual ocntrols and not to tarnish the brightness - no indication 'aid' does not provide - it says adjust buttons that do not exist.  How to bring back the vista theme?

  Hello

  I suggest you to follow the methods below and check if it helps:

  Method 1:

  Try following the steps in the article provided below and check if it helps:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2:

  Also try running the Fixit from the link provided below:

  Visual effects Aero Glass in Windows are not working or displayed

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 3:

  I also suggest you update the graphics drivers on the manufacturer's Web site click the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this helps,

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• iPhone 4S.  Stuck on request to post a link to iTunes.  Has started after installing the recent software update.  Tried to turn but the iTunes link keeps coming.

  iPhone 4S.

  Stuck on request to post a link to iTunes.

  Has started after installing the recent software update.

  Tried to turn but the iTunes link keeps coming.

  You can not connect the phone to iTunes as requested?

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error starting after the first installation of Dreamweaver CC

  I'm under CC under OS X 10.9. Does not start after installing Dreamweaver CC as an admin user using the CC Manager of Dreamweaver. Dreamweaver icon appears in the OS X dock for a second and then disappears without launching dreamweaver.

  Repair disk permissions isn't going to help. A CC of Dreamweaver reinstall uninstall won't help.

  Dreamweaver CS5 also works without problems, Photoshop / bridge / first CC.

  Thanks for any help!

  Christian I would recommend solving your difficulties with InDesign first by your message to http://forums.adobe.com/message/5960299#5960299.  It is likely that both facilities are affected by the same cause.

• After installing SP2 NIC does not

  Hello

  Windows server 2003 with SP1 WIRELESS speed of 10 Mbps. After installing SP2 NIC does not.

  Ravi

  Hello and welcome to the community of VMware.

  You have installed VMware tools on this comments?

• Computer does not start after installing vista sp2.

  When the computer is turned on it presents two options: start windows normally or start the system restart. If start windows normally is chosen, it just reloads the same screen, if launch startup repair, it tells me that it can't solve my problem and returns me to the same screen as well. F8 or help options advanced.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista will not install new updates after installing SP2

  Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

  I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

  I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

  Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

  Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

  You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

  Let me know if you still need help, and I will respond with what I've done.

• 0xc0000034 after installing SP2

  Once I installed Sp2 my pc restarted. CHKDSK ran, and then he stopped on stage 3 with an error! number! name of file.

  I turned off the pc and then he turned his back and got BSOD. Then, I put my vista disk in and started the repair. The pc rebooted, and so he cannot go beyond this black screen saying! 0xc0000034! 444/50091 (GlobalUserInterface.compositeFont)

  What can I do?

  Hello Mobdeiam,

  As in the prior post, we need start menu advanced startup options:

  1. press F8 during startup to enter the Boot Options menu.

  2. choose the Windows repair.

  3. After selecting the location and logging, click the command line option.

  4. type the following command followed by the ENTER key:

  CHKDSK C: /F

  5 let CHKDSK run until the end. It may take some time so be patient and do not restart the computer while it is running.

  6. When CHKDSK is complete, reboot and see if we can get in normal mode and safe.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha