Vista theme disappeared after installing SP2

Similar Questions

• Default gateway disappears after installing SP2.

  Hi people

  I just installed SP2, and now when I start/restart the computer, the default gateway is missing. When I check the properties of the connection, the IP address is correct, but the default gateway is blank - it does not 0.0.0.0, there is nothing at all.

  My computer (Vista Ultimate x 86) and a XP Pro PC are connected to a router. I have disabled the DHCP on the router and use a static IP address for each computer. The XP machine is rarely used. I also have a configuration of the VPN connection. When I first encountered this problem, I deleted the VPN connection in case the PC tried to use it to connect to the Internet. I later recreated once I realized what the problem was.

  Even if I can reset the bridge, I don't want to have to do this every time that I reboot.

  **************************************

  ipconfig on my Vista PC at startup:

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: OS
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Bluetooth PAN network adapter
  Physical address.... : 00-11-67-AA-AC-D3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Marvell Yukon 88E8056 PCI-E Gigabit Ether
  Net controller
  Physical address.... : 00-1E-8C-B7-D9-76
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::980c:2d5d:1cd3:4195% 10 (Preferred)
  IPv4 address: 192.168.1.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
     ... Default gateway. :
  DHCPv6 IOOKING...: 251666060
  DHCPv6 DUID customer...: 00-01-00-01-0F-F2-6D-55-00-1E-8C-B7-D9-76

  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {9E323F18-CB91-4524-B5E3-64A8C101B
  078}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 17:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5A583DB0-C514 - B 49, 6 - 9D1A - 2703884-6
  AFB}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  **************************************
  **************************************

  After resetting the gateway:

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: OS
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Bluetooth PAN network adapter
  Physical address.... : 00-11-67-AA-AC-D3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Marvell Yukon 88E8056 PCI-E Gigabit Ether
  Net controller
  Physical address.... : 00-1E-8C-B7-D9-76
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::980c:2d5d:1cd3:4195% 10 (Preferred)
  IPv4 address: 192.168.1.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
     ... Default gateway. : 192.168.1.254
  DHCPv6 IOOKING...: 251666060
  DHCPv6 DUID customer...: 00-01-00-01-0F-F2-6D-55-00-1E-8C-B7-D9-76

  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {9E323F18-CB91-4524-B5E3-64A8C101B
  078}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 17:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5A583DB0-C514 - B 49, 6 - 9D1A - 2703884-6
  AFB}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  **************************************

  Can someone tell me what is the cause, please? I would also appreciate it if someone can tell me how I can configure the default gateway by using a batch file executed with administrator privileges. That would save me having to dig through Control Panel etc etc every time my computer starts.

  Thank you!

  Hi RealBlood,
  Thank you for visiting the Microsoft Answers forum.
  To solve your problem follow these steps:

  Repair options for TCP/IP stack for use with Windows Vista.

  Start, Programs\Accessories and right click on command prompt, select "Run as Administrator" to open a command prompt.

  In the command prompt window that opens, type type the following commands:

  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Reset the default router by pressing the reset for 15 seconds with power button.

  • Turn off everything, modem, router, computer.
  • Connect the modem to the WAN/Internet port on the router.
  • Connect the computer to one of the router's LAN/network ports.
  • Turn on the modem, wait for triggering connect light.
  • Turn on the router, wait two minutes.
  • Start the computer.

  When the computer is completely loaded, we will see that.

  Hold down the Windows key and press R, then type CMD to open a command prompt:

  In the command prompt window that opens, type type the following command:

  IPCONFIG/ALL

  Right click in the command window and choose select all, and then press enter.
  Paste the results in a message here.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My address bar disappeared after installing antivirus software.

  lost address bar

  address bar disappeared after installing antivirus software

  address bar of Windows XP at the bottom of page.

  In what program? All I have at the bottom of any window is the bar of tasks and in some programs, the status bar.

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• After installing SP2 NIC does not

  Hello

  Windows server 2003 with SP1 WIRELESS speed of 10 Mbps. After installing SP2 NIC does not.

  Ravi

  Hello and welcome to the community of VMware.

  You have installed VMware tools on this comments?

• Windows Vista will not install new updates after installing SP2

  Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

  I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

  I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

  Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

  Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

  You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

  Let me know if you still need help, and I will respond with what I've done.

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• After installing sp2 for my vista ultimate, I noticed in the lower right of my desktop "evaluation copy 6002.

  My problem now is my system continues to alert me that I have 0 hours left of my assessment and install a new version of windows just before the blue screen with a partial message blocking by referring to the same thing.  How can I fix without losing all my installed software and etc. ?

  Learn how to install Vista SP2
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Have you installed Vista SP2 via Windows Update or...?

  Previous, related discussions include:

  http://social.answers.Microsoft.com/forums/fi-fi/VistaInstall/thread/de1b11cb-2846-4bf7-B92A-520f3ecd33d5

  http://groups.Google.com/group/Microsoft.public.Windows.Vista.General/browse_frm/thread/2e95ead94ff4f5ab

  =================================

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista blue screen error: 0x0000c1f5 after installing SP2

  original title: vista crashed after installing updates from m$... will not start!

  After download sp 2, I have now the blue screen with the error 0x0000c1f5... cannot start somehow... tried everything... I read that if I inserted the windows installation disc 7 that it should start from there... can I do a download of it from microsoft and burn disc and install it? Operating system is basic Vista came installed on the new computer. 32 bit

  Hi bandibug,

  To solve your problem, try the steps mentioned in this document .

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• sounds works does not after installing SP2

  Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

  Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

  --

• Error starting after installing sp2

  I am running Windows vista Home premium. After I installed sp2 and restarted my computer windows trys to configure updates get to 100% in step 3, and then restarts the computer and recurrence everywhere. I tried the Startup Repair running, System Restore and tried to start my computer in safe mode. Nothing works please help!

  Thank you

  You don't say how you were trying to enter the SM.

  Try the following helper methods:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to access directories after installing SP2

  I just downloaded and installed the Vista SP2.  Amongs other things, she changed completely the power settings for my laptop, but it's fixable.  What has blocked me is the fact that in Windows Explorer (or any name you people have changed, but I hope you know what I mean), I am is no longer allowed access to directories (or folders, or whatever you call them now) I have BEFORE in installed SP2.  I did all attempts to change the permissions, but the system won't let me (as an administrator) to do this. Explorer Windows sees the direcftory, but the monologue box tells me that the directory "... is not accessible." and "access denied."  This happened with the Windows required file 'my documents '.  When I try to change the permissions 'sharing' by "Everyone" I get the less-than-useful message that «...» An error occurred when trying to share Application data (it is an example). Access is denied.  The shared resource was not created at this time. »

  How can I go to get access to them now?  And something that you should ask yourself - why do you have designed an "improvement" that does this?

  Hi Evan,

  I see you found the access denied error when you try to access the documents"" folder. I will suggest you to do a system restore to the date when Sp2 has been installed, and if in case you want to install Sp2 then you can try downloading the Sp2 standalone package and install in safe mode with disabled security software.

  Here is the link for the standalone pack:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Please try this step and I would like to know the result.

  Kind regards
  Shaolin Roger Thapa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0xc0000034 after installing SP2

  Once I installed Sp2 my pc restarted. CHKDSK ran, and then he stopped on stage 3 with an error! number! name of file.

  I turned off the pc and then he turned his back and got BSOD. Then, I put my vista disk in and started the repair. The pc rebooted, and so he cannot go beyond this black screen saying! 0xc0000034! 444/50091 (GlobalUserInterface.compositeFont)

  What can I do?

  Hello Mobdeiam,

  As in the prior post, we need start menu advanced startup options:

  1. press F8 during startup to enter the Boot Options menu.

  2. choose the Windows repair.

  3. After selecting the location and logging, click the command line option.

  4. type the following command followed by the ENTER key:

  CHKDSK C: /F

  5 let CHKDSK run until the end. It may take some time so be patient and do not restart the computer while it is running.

  6. When CHKDSK is complete, reboot and see if we can get in normal mode and safe.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• The desktop icons disappeared after installing updates

  Original title: almost all of the icons that I had on my desktop disappeared following updates of today 5/11.  There were 19 updates so I don't know which ones to uninstall. What should I do?

  Using IE9.

  Hi DECantrell,

  Because the problem started after installing Windows updates, you will need to perform a system restore before the updates were installed

  You can try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.