error starting after installing vista sp2

Similar Questions

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer does not start after installing vista sp2.

  When the computer is turned on it presents two options: start windows normally or start the system restart. If start windows normally is chosen, it just reloads the same screen, if launch startup repair, it tells me that it can't solve my problem and returns me to the same screen as well. F8 or help options advanced.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Internet problems after installing vista SP2

  I'm running IE8 and yesterday I installed Vista Service Pack 2.  After the installation, I got an internet connection, but could not access all pages including my home page.  The pages would hang and the little blue circle would go round and round and nothing happened.  I also have Firefox downloaded on my computer, and still the same thing happens again.

  I checked my system tools in the lower right of the desktop and my icon for connectivity internet local and internet had a red cross on it that has not changed.  I restarted my computer several times and nothing has changed.  I used the prompt commands and ping google (my homepage) and found within seconds, so the connection was there but not able to access all pages.

  I am running Vista Home Premium as my 32-bit operating system.

  To cure the problem so far, I did system restore and completely got rid of the installation.  As soon as I did, my internet was totally fine with IE8 and Firefox.

  Any suggestions, I won't install SP2 again until I know what has caused the problem of the internet, and he was healed.

  Hi Smokeycat,
   
  Thank you for writing to Microsoft Windows Vista Answers.
   
  Since you have already restored the computer and the internet works fine, try to reinstall the stand-alone version of Service pack 2. Later, try to connect to the Internet.
   
  You have security software installed on the computer? If so, try disabling the security software and install the stand-alone version of service pack 2.
   
  Try to install the stand-alone package for Windows Vista Service pack 2, access the link below and download the file to the desktop. Later, run the installation of Service pack 2 from the office.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
  If the problem persists after you have installed the stand alone package, reply came back with the details:

  1. try to boot into safe mode with network after installation of Service pack 2 and try to access Internet
  2. in normal mode, try to right click on the network icon in the taskbar and click on diagnose and repair, if it gives any error make a note of it and we gives the error.
  3 - is wireless to a wired connection?
  4. do you have any router installed?
   
  I hope this helps.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer does not stop after installing Vista SP2

  I installed the Vista SP2 and now when I try to shut down the computer it just sticks on the page "Shutting Down"

  Hello

  Answers is the correct forum for these questions:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack
  installation issues.
  http://support.Microsoft.com/kb/947366

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ===========================================================

  This problem is often antivirus/security programs.

  -----------------------------------------------------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• CPU usage always 100% after installing Vista SP2

  Hello

  I am currently running A Dell Dimension B110 with 1 GB RAM 256 mb nvidia geforce 6200 (pci), 2.6 ghz celron D and Windows Vista Home Basic SP1.  It works nice and fast.

  That is until I have install SP2.  Then the CPU usage is always 100% when running anything (with the exception of the Windows Explorer), and the pc is running very slowly.  To solve the problem, I went back down to SP1 and everything goes quickly again.

  A few weeks later, I tried again and the same result.  So I returned again back to SP1.

  For future software versions, I need SP2.  Does anyone have advice and/or corrections to this problem?

  Thanks in advance

  -One5860

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error starting after installing sp2

  I am running Windows vista Home premium. After I installed sp2 and restarted my computer windows trys to configure updates get to 100% in step 3, and then restarts the computer and recurrence everywhere. I tried the Startup Repair running, System Restore and tried to start my computer in safe mode. Nothing works please help!

  Thank you

  You don't say how you were trying to enter the SM.

  Try the following helper methods:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows crashes after installing Vista SP2

  He just showed the error when I went to install several updates, then it crashed. All programs hang in the minutes or seconds...

  IT IS TERRIBLE.

  * Title *.
  Updated to Vista Service Pack 2, an error occurred. Now, the OS crashes constantly, if she manages to boot at all. How should I do?

  immadee,
  You are able to start in one of the Advanced startup options?  If so, run the startup repair function and post back with the results of this. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing vista SP2

  Key board works very slowly after installation of service pack 2 visa and the mouse is very slow to move

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0 x 80041003 after installing Vista?

  I get the following error message after installing Vista on my laptop. It causes the computer freezes. It will also freeze after restarting. I have not installed anything, or deleted all the programs. After researching on the forums, I discovered that it is a Vista/Microsoft error that happens regardless of the manufacturer of the computer or installed equipment.

  Microsoft has found the answer to this yet?

  Log name: Application
  Source: Microsoft-Windows-WMI
  Date: 2010-01-07 22:18:41
  Event ID: 10
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SatellitePro-PC
  Description:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      10
      0
      2
      0
      0
      0 x 80000000000000
     
      1434
     
     
      Application
      SatellitePro-PC
     
   
   
      ./root/CIMV2
      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
      0 x 80041003
   
  

  Hello melm12,

  This problem occurs if the WMI filter is accessible without the necessary permissions. To resolve this problem, run a script to stop the event ID 10 messages. Here's an article in the knowledge base with details on how to do it: http://support.microsoft.com/kb/950375. Otherwise, it might be a hardware failure. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Used to install Vista SP2. error code 800705b 3 error_requires_interactive_windowstation

  I now tried installing Vista sp2 several times and get the above error message.

  I have Windows Vista Home premium 32-bit with Service Pack 1.

  I use Google Chrome as a browser and Kaspersky Internet security as a security suite.

  I have a Dell Dimension desktop computer about 6 years now with 1 GB of Ram & AMD Athlon 64 x 2 Dual Core Processor5000 + 2.6 GHz.

  Although I am British my windows operating system is in German.

  I tried a lot of different options suggested on google and Microsoft.

  I tried to install windows update, but that has not worked.

  I also downloaded the SP2 and system update readiness tool and tried to install again, which didn't work.

  I tried to install in safe mode. I did a clean boot and tried to install.

  I checked the registry for the vLight folder see if that was causing the problem, but there was no record vLight.

  I downloaded the Microsoft Fixit 50202 but still cannot install.

  I hope someone can help. All tips are welcome.

  Do you think we (or rather you) will be able to decipher this problem or are - it probably that I have to reinstall Vista and SP1, and then try again to install SP2...

  My #1 concern is the fact that your computer has been & still lacks so many updates of security reviews.

  • Support for Vista Service Pack 1 (SP1) ended on Tuesday, July 12, 2011. Computers still running Vista SP1 "will no longer updates [i.e., updates published after July 12, 2011 so you're now nearly three 3 years behind on security updates critical!]. from Windows Update"until SP2 has been installed (this will require several prerequisite updates be installed first).

  Even if we managed to get SP2 installed, there's a very good chance that one or several updates released since July 12, 2011 will not be able to install.

  Then there's the fact that your computer - and the data on it - has been at risk for so long.

  Therefore, the only way you can ever trust the computer sescurity again would be of formatting the hard drive - and then do a clean installation of Windows (Vista or Win7).

  See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the clean install of Vista, please start your own new thread in this forum & advice: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a "BigBoxStore") computer repair shop & let them do the work.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!