Error then re install windows XP sp 3 on HP mini 110

Similar Questions

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• I re-formatted my c: drive then re installed windows XP now I'm locked up.

  I re-formatted my c: drive then re-installed windows XP. Now windows will ask a password that I don't have. How can I bypass this password or just reformat my drive c: again.   I have to assume that I put a password somewhere, but no password I would have used work wil.

  Hello

  ·         Did you enter the password during the installation of Windows XP?

  Every time that Windows XP is installed on a system, it creates a default account called "Administrator" and by default, this account is not protected by Word. Then try to connect using the empty password in safe mode and check.

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• Desktop HP - 110 - a04: installed Windows 7 Pro on my desktop HP - 110 - a04. Windows 7 drivers help?

  Installed Windows 7 Pro on my desktop HP - 110 - a04.   Windows 7 drivers help?

  Hello

  I couldn't take it any longer using Windows 8.   I installed 7 Pro 64 on this machine, only to find HP doesn't provide drivers for 7 for this particular model.

  The useful link below got my work to adapt (LAN) network.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/HP-110-017C-downgrade-to-Wi...

  Currently, I am missing the drivers below.

  Network controller (possibly the wifi adapter)

  SM Bus controller

  (USB) Universal Serial Bus controllers

  Any help on this problem is highly appreciated.

  Thank you

  Hello:

  Please see if these drivers work:

  SMBus:

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

  USB3:

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  I need to make a simple set of clicks in order for me identify the model of wireless card which needs the driver.

  Since there is no driver installed wireless, need a labeled device network controller in Device Manager under the other devices category.  The network controller device will be somewhat ! brand next to him.

  Thus, to find the network controller device, click on that and then click on the Details tab.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window.

• Error 0x8024400A when installing Windows updates.

  original title: error number: 0x8024400A

  I reformatted an old pc that has windows xp & tried to use windows update, but get the following message - error number: 0x8024400A. Can anyone help please? Have tried using general Fixit and restart the pc, but nothing works.

  Have you recently reload Windows, restored back to factory settings or make other changes to your computer?

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Windows Vista recovery failed, then I install Windows 8 on the not Bootable Windows Vista.

  I bought a PC from a friend, Windows Vista Home Premium.
  Has tried to run a system recovery, but stopped by error 0xd0000017.
  I then created USB boot killdisk to wipe and clean my hard drive, but I think I accidentally delete the wrong volume.
  Not to restart the PC indicating that the file is missing please insert the disc of Windows Setup.
  I downloaded and burned Windows Vista Recovery ISO but could not run the "repair", not re - install.
  I guess the only solution is to buy an upgrade of Windows 8 and clean install it.
  But what bothers me is:
  I don't know if I have a prepared partition when Windows 8 invite "where you want to install windows 8. Help, please. Thank you very much.

  "It's true that the product key is no longer valid with this particular brand? or I can activate the product key for 2 years with any Installation of Windows Vista DVD? »

  Reread my original answer.

  I gave you the information about what you are now on.

• Error 0x8007054f while installing Windows 7 SP1

  When you install Windows 7 SP1, the installation fails with the error 0x8007054f. Can someone tell me how to solve this problem?

  Mary,

  This problem is sometimes associated with damaged files or registry keys, to solve the problem, you need to search for files that are damaged, perform a upgrade on the spot and then reinstall Windows 7 SP1. Here are the steps:

  Step 1: Run Chkdsk.exe

  Click Start , and then click computer

  Right-click on the system (usually C:\) drive, and then click Properties

  Click on the Tools tab, then click on check now under error checking

  Use the default settings, and then click Start

  Click on schedule the disk check

  Restart the computer and the drive will be checked to find errors

  Or

  Run Chkdsk in command prompt with administrative rights.

  CHKDSK x: /F /R  (this command will perform a complete analysis (including bad sectors) and an attempt to remedy)

  Step 2: Perform a upgrade on the spot:

  Click on the following link for more information about how to perform an in place upgrade

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Step 3: Install Windows 7 SP1

  Start Windows Update and install Service Pack 1

  You can also consult the following content is necessary:

  Starting steps to take before installing Windows 7 Service Pack 1 from the Microsoft Download Center

  Problems to install a service pack for Windows 7

• Bluescreen error C000021a, when installing Windows 7

  Hi all

  I get this blue screen whenever I try to install windows 7.
  Details you need to know:
  • I just replaced my hard drive with a new one.
  • Old hard drive: 500 GB Samsung SATA.
  • New hard drive: SATA 500 GB Western Digital.
  • Laptop model is MSI FX420.
  • Previous operating system before replacing the hard drive is Windows 7.
  • What I'm trying to do is install Windows 7.
  Problem - cannot install because after windows loads the files for installation, and just after the windows logo appears, the blue screen appears.

  Hello world

  Thanks for your replies. I've solved this problem and the solution is quite simple - installed Windows 8 instead of Windows 7. I don't know if it's my installation disc which is the problem (but was probably not) or the version of the OS is to be installed. But of course, it wasn't a problem of compatibility or functionality with my hard drive.
  My assumption, it seems that the installation process of Windows 8 is different from Windows 7 in a way that win 8 has been able to complete the installation successfully without displaying error then Win 7 displays a blue screen error just after loading of the installation files. Maybe it's trying to find old stuff from my old hard drive configuration? (Sorry no idea on this area in concrete).
  Good news is that my laptop now works on Windows 8 Pro! Hope that helps people out there with similar problem.
  Thank you!

• Error 80080008 while installing Windows updates.

  Original title: suziwhy

  I tried to upgrade to 8.1 windows, but he refused in the end.

  Now, I get a 80080008 error whenever I try to install the updates.

  Can anyone help? Please

  Hi Suziwhy,

  1 are you this error during upgrade to Windows 8.1 or during the installation of Windows updates?

  2. What is the brand and model of the computer?

  If you get this error when installing Windows updates, then it normally occurs because the file Wups2.dll included in the latest version of Windows Update is incorrectly installed or became non registered.

  I suggest you to re - register the Wups2.dll file and check if this solves the problem.

  Follow the steps to re - register the file by using the command prompt:

  a. press the Windows key + X , and then select (admin) command prompt.

  b. run the following commands and press ENTER after each one:

  net stop wuauserv

  regsvr32 %windir%\system32\wups2.dll

  c. now, you will receive a verification message that the DLL is registered. Click OK.

  d. start the automatic updates service. To do this, type the following command at the prompt (admin) command and press ENTER:

  net start wuauserv

  e. type Exit.

  Reference:

  Problems with installing updates

  http://Windows.Microsoft.com/en-CA/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  You can try to install Windows 8.1 after the steps above.

  Also check the link for more information:

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-CA/Windows-8/update-from-Windows-8-tutorial

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Error 80004005 by installing Windows Vista sp2 x 64

  I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
  I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation.  Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
  I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.

  I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
  1000 gigabit hard drive
  Type system in Windows Vista Home Premium 64-bit
  Graphics card: NVIDIA GeForce GT130

  This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.

  Should I try to reuse the recovery disk? I don't want to make things worse.

  Thank you, Debbie - the technical support for all your help.
  I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
  I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files.

• Error code 80070490 installing Windows Update KB975467, Vista.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  Try to run the system update (or CheckSUR) tool to see if it can resolve the error.
  If it cannot, you can edit the CheckSUR.log located atCheckSUR.log Windows\Logs\CBS\
  and maybe we can see what content is not present in the operating system.

  If you do not feel like the troubleshooting update installation failure, you can get assistance for installing Microsoft:
  From: MS09-059: vulnerability in the Local Security Authority Subsystem Service could allow denial of service

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Web site:

  http://support.Microsoft.com/common/international.aspx?rdpath=4  

  North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows 7 sp1 update for hp mini 110-3000sa

  Hi I have a problem with my hp mini 110-3000sa when I try to upgrade to sp1 I get the error message and the upgrade fails

  can't get sp1 to install on this machine my dm1 had no problem

  for example

  Spinstall.exe system error

  the program cannot start because sqmapi.dll is missing on your computer

  try reinstalling the program to fix the problem

  HP software Assistant is on all completed including BIOS updates

  disabled avast antivirus

  no idea whats wrong

  any ideas gratefully received

  Thank you

  Go to the start menu > all programs > Accessories > command prompt icon

  Right-click on the icon and select run as administrator.

  Once the command window opens type the following command in the command window. :

  sfc/scannow

  hit enter key, see if it will take place and what results or error messages, and then post them.