error: timeout expired before the operation ended

Similar Questions

• VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  Please suggest a solution.

  Thank you very much, it worked!

• VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Hello

  We use LabView to control a sequencer of high-voltage (HVS448LC 3000 D) LabSmith using LabView drivers from the manufacturer, power supply. Everything works well in our program (attached) until we try to use another program on the computer at the same time. For example, if we try to open a window for our camera, or even a folder in Windows, the program gives the following error:

  1073807339 error has occurred in the CITATION read in FromHVS448.vi-> CommandHVS448.vi-> RegulateVoltage.vi-> Gated timed injections version 06.the vi

  Possible reasons:

  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  We would like to be able to control the camera software and the power of LabView by using the same computer, but we do not know what could cause this problem. We would appreciate any suggestions! Thank you!

  You should really put a lot of orders of pre-instrumentation in parallel.  Force an execution order by using the wire of the error.  Serialize all commands to the instrument.  You may have an order interfere with one another.

• vSAN upgrade from 5.5 to 6.0 - Timeout to complete the operation

  Hi all

  I've been running a 5.5 vSAN configuration identical to William Lam to the virtual Ghetto (a killer custom installation of Apple Mac Mini running VSAN | virtuallyGhetto) for some time and the only reason not to upgrade more far was because of wanting to maintain a configuration of 5.x Horizon view inherited who needs vCenter 5.5. I've now decided this should not dictate my whole environment then after a successful move to 6.0 on the hosts and VCSA, I thought I would upgrade to vSAN 6 to take advantage of the improvements it brings, not to mention to remove the nagging alerts on the vSAN update available.

  After running through the prerequisites this fact compensation involved in a number of vswp files inaccessible, vSAN reported a good state of health and so I started with the upgrade online, be sure to include - allow-reduced -redundancy I have a 3-node cluster.

  When running and after about 20 minutes of nail biting (by accepting the fact that his machines of laboratory accommodation only, their fate can be determined by the success of failure of the upgrade), I received the following in the TVR: -.

  : Deletion of this VSAN disk group failed

  : A general error occurred: could not evacuate data for disk uuid 52da00fa-c8f2-fdb8-924c-3007d480ac4d with error: timeout to complete the operation

  : Cannot delete the VSAN disk, leaving group.

  : Upgrade tool stopped due to the error, please address reported the problem and run the tool again to complete the upgrade

  Someone at - it guidance on how to approach the time-out, or he could escape that I would understand rather the root cause that blindly blow to remove all of the configuration and reboot.

  Thanks for your help!

  All the best

  
  Andrew

  Hi Duncan,.

  I managed to work around the problem in the end, in a weird way. I ended up changing the default vSAN FTT from 0 to 1 storage policy and reapplied to redistribute the data or the light evenly on the hosts as expected to the compliance of the report. After a few hours, I then changed the default vSAN strategy towards an FTT of 0 and again applied. By running the TVR command with the parameter - allow_reduced_redundancy again by the failed sequel, but a quick check on the vSAN has shown that the majority of data consumption was now on the hosts 2 and 3 with a tiny 3 GB of use reported against the disk of the host of the first group. At that time, I've been manually the disk group on host 1 (choose not to evacuate the small amount of data that has been left). After you re-create the disk on the host group, it automatically came back in as v2 and I repeated the process described above in the other two hosts effectively the content of vSAN brewing between the hosts and drop what I believe has been corrupted/no valid data on the host group could not be evacuated by the upgrade process.

  At the end of it, all my virtual machines survived the upgrade of vSAN.

  See you soon

  Andrew

• BlackBerry sync Outlook with Curve 8330 Smartphones get error "the operation ended unexpectedly.

  When I try to sync my phone with Outlook, I get the error message: "the operation ended unexpectedly. Occurred since that I have the phone.  Were able to synchronize several times after that rename data files or reinstall but this no longer works.

  Here are my coordinates.

  PC: Dell Latitude D620

  Phone: RIM Curve 8330

  OS version: Windows XP SP2 (32-bit)

  Version of Outlook: 2003 (11.8216.8172) SP3

  The Office Manager version: 4.6 (also tried 4.5 and 4.2)

  Phone model and device OS: 8330 Curve v4.3.0.127 (Platform 3.1.0.73)

  Hello

  It seems that one of the applications has some possibly closing the synchronization of corrupted data.

  I test in Synchronization Manager and disable all options except the calendar, set of conflict

  resolution for you inform of the resolution. Run the synchronization. If the program works and ends normally,

  Add the following category, with notification to you. Repeat this until the program fails.

  We are trying to determine which application has corrupted data.

  Do you agree?

  Thank you

• Problems with error "1084: syntax error: expected rightbrace before the end of the program."

  I can't figure out what to do with it because I get the same error:

  ""1084: syntax error: expected rightbrace before the end of the program.".

  Here is my code:

  begin.onRelease = function() {}

  RND = random (8);

  If (rnd > 3) {}

  If (rnd == 7) {}

  RND = 11;

  } rnd = rnd-7;

  } turn = true;

  }

  onEnterFrame = function() {}

  If {(rotation)

  Wheel._rotation += ((rnd*45) - wheel._rotation) / 10;

  }

  Thank you.

  Based on what you show here is a hug from final missing... everything in the end.

  You send messages AS2 code in AS3 forum.  If you continue to have a problem, to repost in the AS1/2 forum.

  http://forums.Adobe.com/community/Flash/flash_actionscript?view=discussions

• Line 26 1084: Syntax error: expected rightbrace before the end of the program

  Im trying to make an animation, how can I fix line 26 1084: syntax error: expected rightbrace before the end of the program?

  package

  {

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class extends MovieClip AvoiderGame

  {

  public var enemy: enemy;

  public var gameTimer:Timer;

  public void AvoiderGame()

  {

  enemy = new Enemy();

  addChild (enemy);

  gameTimer = new Timer (25);

  gameTimer.addEventListener (TimerEvent.TIMER, moveEnemy);

  gameTimer.start ();

  }

  public void moveEnemy (timerEvent:TimerEvent): void

  {

  enemy.moveDownABit ();

  }

  }

  {

  This last curly brace must be reversed. You have an opening brace where a closing brace should be.

• 1084: syntax error: expected rightbrace before the end of the program.

  So I do this thing basic coding to make an object 'pull' bullets. This is a video tutorial. My code its corresponds exactly, unless I'm missing a small detail. Basically, the code looks like this:

  
  

  package {}

  
  

  import flash.display.Sprite;

  
  

  import flash.events.Event;

  public class ball extends Sprite {}

  private var sw:Number;
  private var sh: number;
  private const _SPEED:int =-10;
  private const _OFFSTAGE:int =-10;

  public function ball (): void {}
  addEventListener (Event.ADDED_TO_STAGE, onadd);
  }

  private void onadd(e:Event):void {}
  SW = stage.stageWidth;
  SH = stage.stageHeight;
  addEventListener (Event.ENTER_FRAME, loop);
  }

  private void loop(e:Event):void {}
  If (y, _OFFSTAGE) {}
  removeEventListener (Event.ENTER_FRAME, loop);
  parent.removeChild (this);
  }
  y = _SPEED;
  } public function removeListeners (): void {}
  removeEventListener (Event.ENTER_FRAME, loop);

  }

  And I get the compile error wrote:
  Location: Bullet.As line 31 1084: syntax error: expected rightbrace before the end of the program. Source :}
  Location: Bullet.As line 31 1084: syntax error: expected rightbrace before the end of the program. Source :}
  And yes it say it twice. What is going on?

  The vid I learn is the following: http://autocad.spinelink.com/adobe-flash-cs4-game-tutorial-shooting.html

  If what you show is what you have, then the mistakes are teliing you have some missing braces.  From what I see, there are probably 2 missing at the end.  For each {there must be a} somewhere.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• Get error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out when opening applications on Facebook

  I need help for my this error error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out

  It's my app from facebook

  Hi Muhammadarif,

  1. the problem occurs only in facebook?
  2. what web browser do you use?

  This is a known error in Google chrome. If you are using Google chrome then I suggest you post in the forums of Google chrome.
  http://productforums.Google.com/d/Forum/chrome

  If the problem only occurs in facebook, then I suggest you to contact facebook support.
  http://www.Facebook.com/help/

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Streets &amp; Trips has expired before the date of the trial.

  Streets & trips has expired before the date of the trial

  Hello

  I suggest you post your questions on the forum of Streets and Trips is here:
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen

• Error #3200: Cannot perform the operation on the window closed.

  Hello

  I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error

  Error #3200: Cannot perform the operation on the window closed.

  When I test as a stand-alone desktop application, it works very well.

  I tried it with a window pane mxml, as well as with the code, such as:

  var newWindow:Window = new Window()

  newWindow.title = "new window";

  newWindow.width = 200;

  newWindow.height = 200;

  newWindow.open (true);

  I use a WindowedApplication.

  Flex 3.5

  2.7 AIR

  Flash Builder 4.5 (do not use the Extension Builder)

  Thank you!

  Jeff.

  I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.

  Here's how:

  victory: MyCustomWindowType = new MyCustomWindowType;

  win.showStatusBar = false;

  Win.type = CSXSWindowType.MODAL_DIALOG;

  Win.Open ();

  You probably want to create a component based on the window.

  In addition, you must use CSXSWindowedApplication. It is possible that it took for this...

• Error message 'missing; before the declaration 24 "

  Hello

  I get the error message "missing; before the declaration 24 "in the following script:

  Create a variable to hold the document object

  var StartDate = (xfa.form.form1.page1.signature.StartDate.rawValue);
  var EndDate = (xfa.form.form1.page1.signature.EndDate.rawValue);
  var assocName = (xfa.form.form1.page1.signature.assocName.rawValue);
  assocID var = (xfa.form.form1.page1.subForm1.assocID.rawValue);
  var assocEmail = (xfa.form.form1.page1.subForm1.assocEmail.rawValue);
  var assocExt = (xfa.form.form1.page1.subForm1.assocExt.rawValue);
  var assocDept = (xfa.form.form1.page1.subForm1.assocDept.rawValue);
  var mgrName = (xfa.form.form1.page1.subForm1.mgrName.rawValue);
  var mgrEmail = (xfa.form.form1.page1.subForm1.mgrEmail.rawValue);
  var salariedHourly = (xfa.form.form1.page1.subForm1.salariedHourly.rawValue);
  directReports var = (xfa.form.form1.page1.subForm1.directReports.rawValue);
  var perfRating = (xfa.form.form1.page1.subForm1.perfRating.rawValue);
  var howLongWorking = (xfa.form.form1.page1.request.howLongWorking.rawValue);

  
  PRESENT DATE
  If (StartDate == "") then
  xfa.host.messageBox ("Please enter a shipping Date");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.StartDate");

  HIRE DATE
  ElseIf (EndDate == "") then
  xfa.host.messageBox ("Please enter a hire Date");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.EndDate");

  NAME OF PARTNER
  Else if (assocName == "") then
  xfa.host.messageBox ("Please enter your name");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocName");

  PARTNER ID
  ElseIf (assocID == "") then
  xfa.host.messageBox ("Please enter your ID");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocID");
  
  EMAIL PARTNER
  Else if (assocEmail == "") then
  xfa.host.messageBox ("Please enter your email address');
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocEmail");
  
  EXTENSION ASSOCIATE
  Else if (assocExt == "") then
  xfa.host.messageBox ("Please enter your extension number");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocExt");
  
  DEPARTMENT ASSOCIATE
  Else if (assocDept == "") then
  xfa.host.messageBox ("Please enter your Department");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocDept");
  
  NAME OF THE MANAGER
  Else if (mgrName == "") then
  xfa.host.messageBox ("Please enter your name of");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrName");
  
  E-MAIL MANAGER
  Else if (mgrEmail == "") then
  xfa.host.messageBox ("Please enter e-mail address of your manager");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrEmail");
  
  HOURLY EMPLOYEES
  Else if (salariedHourly == "") then
  xfa.host.messageBox ("Please enter if you are salaried or hourly");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.salariedHourly");
  
  DIRECT SUBORDINATES
  ElseIf (directReports == "") then
  xfa.host.messageBox ("Please indicate if you have any direct report");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.directReports");
  
  PERFORMANCE RATING
  Else if (perfRating == "") then
  xfa.host.messageBox ("Please certify your last performance rating");
  xfa.host.setFocus ("xfa.form.form1.page1.subForm1.perfRating");
  
  HOW LONG WORK
  Else if (howLongWorking == "") then
  xfa.host.messageBox ("Please indicate how long you think that this scheme of work");
  xfa.host.setFocus ("xfa.form.form1.page1.questions.howLongWorking");
  

  on the other
  Button6.execEvent ("Click");
  Page2.presence = "visible";

  EndIf

  I have been hunting for several hours and can't seem to find or correct the problem. Can anyone help?

  Thank you

  MDawn

  It would be easier if I cpoudl see the form in action... .a you send it to [email protected] and include a description of how to reproduce the problem.

  Paul