Get error 118 (net::ERR_CONNECTION_TIMED_OUT): the operation timed out when opening applications on Facebook

Similar Questions

• 'Operation Timed Out' when cloning a VM

  Hello

  I'm trying to clone a virtual machine through virtual Center and I get the following error after only a few seconds.

  Impossible to duplicate * NAME * server has expired.

  ESXI 4.1.

  VSphere Server 4.1.0

  I am cloning to the same host

  Cloning of virtual computer works fine.

  Would really appriecate any help/troubleshooting advice, not even sure what log file for check but below is a part of the file server VCentre {vpxd-974 Journal} log log if it helps.

  Thank you

  2012-03-16 20:04:44.574 08068 verbose 'App'] [VpxdTaskInfoPublisher] processing object update 0 filter 0

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] update for prop info.completeTime

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] UpdateTaskInfo for channel task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoChannel::NotifyWaiters] Notified for _infoVersion: 4; task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoChannel::SetDisconnected] task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [TaskInfoPublisher::RemoveChannel] Channel (task-25392) removed for task: task-25392

  [16-03-2012 20:04:44.574 08068 verbose "App"] [VpxdTaskInfoPublisher] Disconnected

  [16-03-2012 20:04:44.574 08384 verbose "App"] TaskInfoChannel destroyed for task-25392

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.574] [clone] (SERVER1) Unexpected exception (vim.fault.Timedout) over clone. Abandonment.

  [16-03-2012 08700 WARNING opID "App" = 07130DD4-000004DF 20:04:44.583] [JrnlFilePersistenceProvider] Got EOF when reading file

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.598] [JrnlFilePersistenceProvider::DeleteJournal] Removal of C:\ProgramData\VMware\VMware VirtualCenter\journal\1331928251.240.

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.598] [VpxdVmprovXaction] From the log restore

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.598] [VpxdVmprovXAction] UndoCreateSnapshot... vm: vim. VirtualMachine:vm - 345, name of the snapshot: clone-temp-1331928251840724

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXAction] UndoCreateSnapshot failedto find the snapshot that he was supposed to remove

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXaction] An std (vmodl.fault.SystemError) exception in treatment entered paper (op = 7), the entry is ignored

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprovXaction] Made available VM transaction cancellation

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [vm.clone] Unexpected exception when cloning a vm: /vpx/vm/#345 /.

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdResMgr] Unreserving

  [16-03-2012 08700 verbose opID "App" = 07130DD4-000004DF 20:04:44.599] [VpxdResMgr] RESV Spec:

  (host - 361:3, 1)

  (host - 361:8, 0)

  (host - 366:3, 1)

  (host - 366:8, 0)

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] [VpxdVmprov] Clone failed: vim.fault.Timedout

  [16-03-2012 08700 error "App" opID = 07130DD4-000004DF 20:04:44.599] vim.fault.Timedout

  -End of newspapers in memory-

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.603] [VpxLRO] - FINISH special 47187 - vm-345 - vim. VirtualMachine.clone--481DABDF-D6BC-4F17-B43A-80AB476FB60D(84215248-DBF9-4769-ABB6-59796EA66029)

  [16-03-2012 08700 info "App" opID = 07130DD4-000004DF 20:04:44.603] [VpxLRO] - ERROR task-47187 - vm-345 - vim. VirtualMachine.clone: vim.fault.Timedout:

  Result:

  {(vim.fault.Timedout)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  MSG = 'Operation timed.' out,

  }

  Args:

  The ARG file:

  ' vim. record: Group-v447'

  The ARG name:

  "New Virtual Machine.

  ARG spec:

  {(vim.vm.CloneSpec)

  dynamicType = < unset >

  location = {(vim.vm.RelocateSpec)

  dynamicType = < unset >

  data store = ' vim. Datastore:datastore - 168',

  diskMoveType = < unset >

  pool = ' vim. ResourcePool:resgroup - 87',

  Host = < unset >

  transform = < unset >

  },

  model = false,

  config = null (vim.vm.ConfigSpec),

  customization = null (vim.vm.customization.Specification),

  powerOn = false,

  snapshot = < unset >,

  }

  Hi kilicool,

  Welcome to the community.

  Have you tried to reboot the VC Server? If Yes

  In turn, before adding the host ESX VCS try to restart the management

  The agent that is running on ESX.

  CLI: service mgmt-vmware restart

  If this does not work I would say adding VC to the host, but I think that the

  above command will help you because it's just VCS

  "Affirmation without discipline is the beginning of delirium."

• Get VPN client to connect, but request timed out when ping

  Hi, I use the router Cisco 837 as my VPN server. I am connected using Cisco VPN Client Version 5. But when I ping the ip of the router, I have request timed out. Here is my configuration:

  Building configuration... Current configuration : 3704 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname michael ! boot-start-marker boot-end-marker ! memory-size iomem 5 no logging console enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0 ! aaa new-model ! ! aaa authentication login default local aaa authentication login sdm_vpn_xauth_ml_1 local aaa authorization exec default local aaa authorization network sdm_vpn_group_ml_1 local ! aaa session-id common ! resource policy ! ip subnet-zero no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool michael    network 192.168.1.0 255.255.255.0    default-router 192.168.1.1    dns-server 202.134.0.155 ! ip dhcp pool excluded-address    host 192.168.1.4 255.255.255.0    hardware-address 01c8.d719.957a.b9 ! ! ip cef ip name-server 202.134.0.155 ip name-server 203.130.193.74 vpdn enable ! ! ! ! username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f. username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/ ! ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 crypto isakmp xauth timeout 15 ! crypto isakmp client configuration group michaelvpn key vpnpassword pool SDM_POOL_1 acl 199 netmask 255.255.255.0 ! ! crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ! crypto dynamic-map SDM_DYNMAP_1 1 set transform-set ESP-3DES-SHA ! ! crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1 crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto map SDM_CMAP_1 client configuration address respond crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1 ! ! ! interface Ethernet0 description $FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 hold-queue 100 out ! interface Ethernet2 no ip address shutdown hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/35   pppoe-client dial-pool-number 1 ! ! interface FastEthernet1 duplex auto speed auto ! interface FastEthernet2 duplex auto speed auto ! interface FastEthernet3 duplex auto speed auto ! interface FastEthernet4 duplex auto speed auto ! interface Virtual-PPP1 no ip address ! interface Dialer1 description $FW_OUTSIDE$ mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp chap hostname ispusername ppp chap password 0 isppassword ppp pap sent-username ispusername password 0 isppassword crypto map SDM_CMAP_1 ! ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5 ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server no ip http secure-server ! ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723 ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21 ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload ! access-list 1 remark SDM_ACL Category=16 access-list 1 permit 192.0.0.0 0.255.255.255 access-list 102 remark SDM_ACL Category=2 access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 access-list 102 permit ip 192.168.1.0 0.0.0.255 any access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 route-map SDM_RMAP_1 permit 1 match ip address 102 ! ! control-plane ! banner motd ^C Authorized Access Only UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED You must have explicit permission to access this device. All activities performed on this device are logged. Any violations of access policy will result in disciplinary action. ^C ! line con 0 no modem enable line aux 0 line vty 0 4 ! scheduler max-task-time 5000 end
  
  Thank you, anny help will be appreciated.
  			 
  Hi Michael,
  I have been through the newspapers, they are not conclusive and only detrmine that Phase 1 is coming. However according to this error message % SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr = 81B50AD8, count = 0 we are hiiting a bug on ios. The id of the bug is CSCsl24693 and the solution is to switch to 12.4 (11) XJ.
  Can you re-execute him debugs and send me the detailed results.
  Kind regards
  Aman
  		   

• Get "error 0 x 80070057: the parameter is Incorrect" when you try to edit the photo details

  I'm changing the date of the photo, and I get this error code, please help me as soon as possible.

  Hello

  The parameter is incorrect error indicates that the files are not accessible when you try to change them.

  Check if the problem continues in a new user account.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• How to stop the loading of funds when opening applications

  Recently upgraded to windows 8. When I click on an app of the splash screen that loads Office followed first by the app. When I close the application. I returned to the office. I find that I have little use for the desktopso would stop loading unless asked is it possible?

  Unfortunately that presented as a tile App some programs have to run in desktop mode. This obviously applies to programs that run on older versions of Windows. Only programs that are written like an application will remain in the environment of the start menu. Even some of the included windows programs always run in the desktop environment and have not been re-written as an application.

  However, Office mode allows multiple applications will take place so no program can stop at the splash screen and it would need to be aware of other programs and the startup mode for the last one to close the office.

  Should be then the o/s to follow how the Office has begun and the fence when is no longer needed, not beyond the field of opportunity, but not something he does right now.

• Game get unresponsive, a communication error has occurred: Operation Timed out

  A communication error has occurred: "Operation timed out".

  The Web server may be down, too busy or other problems preventing him from answering. You can try again at a later date.

  For assistance, contact your network support team. That's what I get when I try to access a game I play. Worked fine when I stopped last night, but all day was like that, everything is fine.

  Hello

  ·          Game in which you try to read?

  ·          You play this game online?

  I would say also, please contact game support to check their end technical issues.

• When you try to connect to my email I get error 103. (net connection error - abandoned)

  e-mail connection problems

  When I try ti sign in is blindly. Most of the time I get error 103 (net connection error-abandoned) unknown error, why this is happening and what can do about it

  Usually, it is a problem on the server or your internet connection.  Contact your e-mail and internet providers to ensure that they are not questions.

  Steve

• Unable to connect to facebook, error 101 (net::ERR_CONNECTION_RESET): the connection was reset

  Original title: Facebook error 101 (net::ERR_CONNECTION_RESET): the connection was reset

  I only get this problem when I try to log into facebook.

  I assumed it was mcafee blocks but do not seem to be the problem.
  I cleared my cache and temporary files.
  I ran a diagnostic - found nothing tool.
  Concerning

  Hello

  1 did you do changes on the computer before the show?

  2 does happen with all browsers?

   

  Method 1: Reset Internet Explorer settings

  Use this method if you are using Internet Explorer

  See the following site:

  How to reset Internet Explorer settings

  http://support.microsoft.com/kb/923737.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Method 2: Reset the Internet Protocol

  See the following site:

  How to reset the Protocol Internet (TCP/IP)

  http://support.microsoft.com/kb/299357.

   

  Method 3: Reinstall the network cards

  a. click Start, type devmgmt.msc in the start search box and press enter

  b. right click on the device, then click on uninstall. Restart the computer and allow the driver to install.

   

• vSphere high availability 'Élection' fails at 99% 'operation timed out' to 1 of the 2 hosts

  Hello

  We had a system with 1 host ESXi 5.1 with local disks.

  Now, we install redundancy by adding a 5.5 U2 ESXi host and a device of vCenter 5.5.

  After having installed and any addition to vcenter, we went the ESXi 5.1 to 5.5 U2 ESXi. The SAN works correctly (vMotion works on the own NETWORK card).

  Now, if I try to activate the high availability, both servers will install the HA Agent and start "Election".

  All the warehouses of data (4) on the SAN are chosen for the HA heartbeat, response of isolation is "keep it turned on" by default.

  A server will always be this process done, and the other will keep "elect" until it reaches 100% and errors on the operation "election timed out.

  I've seen this problem on both servers, so I think that the 'master' elected does not have the problem, only the "slave".

  I have checked these items and executed, but not worked:

  VMware KB: Reconfiguration HA (FDM) on a cluster fails with the error: operation timed out

  -The services were running

  VMware KB: Configuration HA in VMware vCenter Server 5.x does not work, error: Operation Timed out

  -All the MTU has been set at 1500

  VMware KB: VMware High Availability Configuration fails with the error: unable to complete the configuration of the ag of HA...

  -the default gateway is not the same on the two hosts, but I fixed that. There is no itinerary changes. HA the setting is "leave power." After correction and deactivation/reactivation HA, the problem is always the same.

  VMware KB: Check and reinstall the correct version of the VMware vCenter Server agents

  -J' ran "Reinstall ESX host management agents and HA on ESXi" agent of HA, and I checked that it was uninstalled and reinstalled during the reactivation of HA.

  CP /opt/vmware/uninstallers/VMware-fdm-uninstall.sh/tmp
  chmod + x /tmp/VMware-fdm-uninstall.sh
  /tmp/vmware-FDM-uninstall.sh

  I did this for two guests. This fix makes the problem of the election and I was still able to run a HA test successfully, but when after this test, I turned off the 2nd Server (in order to test the PA in the other direction), HA has no failover to 1 and everything remained low. After pressing 'reconfigure HA', the problem of the election appeared again on 1 hosts.

  Here are a few extractions of newspapers:

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:01:26 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03:02 192.27.224.139

  -Message "host vSphere HA State" on 192.27.224.139 changes from green to red info 29/11/2014 22:02:58 192.27.224.139

  officer of HA - vSphere for this host has an error: vSphere HA agent may not be properly installed or configured WARNING 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became info error of initialization of 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:00:52 192.27.224.139

  -DSMD3400DG2VD2 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -DSMD3400DG2VD1 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -Firewall configuration has changed. 'Enable' to rule the fdm value successful.  29/11/2014 info 22:00:45 192.27.224.139

  -L' availability vSphere HA of that host State became not initialized info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root host

  -vSphere HA agent on this host is disabled info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root

  -Reconfigure HA vSphere host 192.27.224.139 operation has timed out.     root of HOSTSERVER01 29/11/2014 22:00:31 29/11/2014 22:00:31 29/11/2014 22:02:51

  -Configuration of vSphere HA 192.27.224.139 operation has timed out.     System HOSTSERVER01 29/11/2014 21:56:42 29/11/2014 21:56:42 29/11/2014 21:58:55

  Can someone give me please with help here?

  Or the extra things that I can check or provide?

  I'm currenty running options.

  Best regards

  Joris

  P.S. I had problems with cold Migration during the implementation of the SAN. After setting up all (vMotion, ESX upgrade), these problems have disappeared.

  When you search for this error, I came to this article: KB VMware: VMware vCenter Server displays the error message: unable to connect to the host

  And this cause could make sense, since the server vCenter changed and IP addressing has been changed during the implementation.

  However, in the file vpxa.cfg, the < hostip > and < serverip > is correct (verified by using https://< hostip > / home).

  Tried this again today, no problem at all.
  

  P.P.S. I have set up several of these systems from scratch in the past without problem (if it is an 'upgrade').

  OK, so the problem is solved.

  I contacted Dell Pro Support (OEM offering the license) and they checked the logs (fdm.log) and found that the default IP gateway could not be reached.

  The default gateway is the ip address by default host isolation, used by HA.

  Because it is an isolated production system, the front door provided proved only for future purposes.

  Now, I've changed the default gateway address of management on the switch plugged into both hosts, namely the ping requests.

  This solved any problem.

• error: timeout expired before the operation ended

  Hola a todos buenos dias

  Estoy trabajando con UN medidor el cual pressure is communication via USB micro USB, are not already marcarme este error (timeout expired before the operation ended)

  Yahe probado changing el timeout, delay el, config bytes to port y nada. ES mas, todo esto samples are:

  http://digital.NI.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0

  I hope that I can help, thanks to photos

  End of the line constant is dependent on the platform.

  

  Choose one of these constants as string endpoint of your!  and seriously check all your constants in the VALUE chain.  showing the display style only helps you identify which are false

  Then: save that attachment to C:\Users\\Documents\LabVIEW Data\Probes\

  When you select and right-click on a wire string, you will have a new selection under probe custom > StretchyString! It looks like this:

  

  Believe me, you really want to use for debugging the channels of communication and messages it will allow you to completely inspect strings with nonprinting charaters and whitespace.  It resizes too big because you might need it and you can change the display format.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• Just installed icloud and itunes. In the Itunes store preferences when I applications boxes music and books and press ok, computer get autherise error message how do I

  Just installed icloud and itunes. In the Itunes store preferences when I applications boxes music and books and press ok, computer get autherise error message how do I

  If you open itunes,

  At the top right, you will see if your signature at.

  Once you sign up on the left,

  Click on Store and then let the House load,

  Yet once, click Bank to authorize this computer is listed.

  Enter the same apple ID and password when prompted.

• Error 101 (net::ERR_CONNECTION_RESET): the connection has been reset.

  When I open zynga Facebook games I see what "this webpage is not available".

  The connection to facebook2.poker.zynga.com .
  Here are a few suggestions:

  • Reload this Web page later.
  • Check your Internet connection. Restart to any router, modem or other network devices, you could use.
  • Add Google Chrome as a program authorized in the settings of your firewall or antivirus software. If it is already authorized program, try to remove from the list of allowed programs and Add again.
  • If you use a proxy server, check your proxy settings, or contact your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server, adjust your proxy settings: go to the menu key > settings > Show avancΘs... > change proxy settings... > LAN settings and uncheck the box "use a proxy server for your LAN".
  Error 101 (net::ERR_CONNECTION_RESET): the connection has been reset.

  Hi LilyXN,

  Thanks for the post. I'm sorry to hear that you have problems with zynga on facebook games.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. which web browser you are using?

  2 does occur with any other website?

  3. were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Follow the steps in the link.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Method 2:

  Follow the steps in the link.

  See the link.

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen