FAILED: An error occurred during conversion: "the operation encountered a network error.

Similar Questions

• An error occurred during conversion: the operation encountered a network error.

  Nice day. We are currently trying to convert vm to ESX 3.5 to 5.5 using the media only converter ver 5.5. The conversion with 2% with the operation failure encountered a network error. I then submitted back to the job and selected only 1 drive 5, drive system, and successfully completed. How I will go about to get the 4 remaining disks converted to the already existing virtual machine?

  I don't understand.

  Make another conversion to another virtual machine. Do so without reconfig because it will be without the system volume.

  Then attach disks resulting for the virtual machine from the previous conversion.

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  When I use the converter P2V a VM to ESXi. The VM OS is SUSE10SP2. the process is 98%, give the error:

  FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  Source operating system is SLES10SP2

  How to deal?

  The source has been recognized as "suse", not as "sles:

  -->

  Are you sure it's SuSE Enterprise and not Open SuSE? Converter supports SLES only.

  Anyway, you can try a hack to make apparently SLES - change the ' / etc/SuSE-release ' on the source machine (or something similar in the model/etc / *-free) and in the first line add "Enterprise." Then try the conversion again. It's the machine 'lsuseinux90 '.

  Regarding the "opscenter' - version has not been recognized too. The second line in the output file should be something like "VERSION = xx".

  HTH

  Plamen

• Conversion failed Acronis backup of windows 2003 server to EXsI: FAILED: an error occurred during conversion: "an error of file encountered.

  I am trying to convert an image backup acronis tru to a windows 2003 server to a server esxi virtual computer, a system I had converted previously on 4.x and exsi 5.1 Converter and using the same image and same PC to convert, but now he is unable to 59% with the status:

  FAILED: An error occurred during conversion: "a file error has been detected" and error: error: impossible to clone the C:\Windows\TEMP\vmware-temp\vmware-me\nvdsxwvgwgxyklny\disk-1.vmdk drive on the virtual machine "server."

  Don't know where to go with this.

  Anyone have any ideas?

  Unfortunately, there is a mistake in your image file: 2014-05 - 20 T 20: 41:17.034 - 04:00 [02140 WARNING 'Default'] [, 0] [NFC ERROR] read has no curSector = 588398592, nSectors = 512: failure of a custom of third party library function call: (3116).

  Seems like you need to repair the virtual machine somehow, probably you start it, or use a tool acronis to repair the image.

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• FAILED: An error occurred during conversion: 'unknown exception '.

  Im not able to convert servers more.

  She always be limited to 1% with the error:

  FAILED: An error occurred during conversion:
  'Unknown exception '.

  IM using converter 5.0.0 build-470252 and ESXi v4.1

  Someone who can help?

  Firewall it s ok to p2v?

• FAILED: An error occurred during conversion

  I installed the VMware vCenter Standalone Converter software on our 64-bit system Redhat requiring to be virtualized, then I also installed it on a Windows XP system on the network.  Then, I installed the ESX Server on a third-party system.  Windows system was able to start a conversion of the Redhat box on the ESX Server, however the conversion failed with the message: FAILED: an error occurred during conversion

  How to solve this?  I have attached the logs that were created for this attempt.

  Thank you.

  Same error found in your newspaper, but on another partition (your "/")

  Please refer to this post

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• vSphere with the launch of the operations encounter error management

  Whenever I run this lab, I get an error message - Oops! We encountered an error -is anyone know what I can do to fix this?

  Please see the attached screenshot.

  Try this direct link: http://labs.hol.vmware.com/HOL/catalogs/lab/2471

• 11 - k000na: problem of restart of the operating system after disk erasing

  Hi there are members of the HP support forum!

  I bought my product, the HP Pavillion 11-k000na, in October of last year and around in time to March this year, I found the speed of the computer to be really bad, so I decided that I do a disk cleanup and restore the computer to factory settings I've done. Restart the computer, I discovered that something has gone wrong and after many failed attempts I could not restart the operating system.

  Time and time again, the laptop gives me the same error - message

  Error code 0 xC0000001

  When I bought the computer it came installed with windows 8 and I've quickly updated to windows 10, would be the problem that when I restored it to factory settings, it does not know how to restart now?

  Any help would be really useful thanks!

  Oliver

  Hello

  On the upgrade of Windows 8 to 10, built in recovery partition got corrupted and will stop running more.

  How do you reset phone?

  Only I know is to order for your model of HP USB recovery. Or pure 8.1 Windows update install using Windows Media creation tool. Both methods retrieve product key of activation of the Board BIOS chip, automatically and be activated.

  Concerning

  Visruth

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Error message during the installation of the sound card: an error occurred during the installation of the device__ "e/s operation was abandoned because of a thread exit or an application request." _

  Hello
  I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
  There was a problem installing this hardware:
   
  An error occurred during the installation of the device
  "The IO operation has been abandoned due to a thread exit or an application request."
  The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
  Thank you
  I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)

  Hello Smachbub,

  Thank you for your message.  Let's try one or two different things.  Please follow step by step.
  1. we will try to completely remove the previous sound card driver, then reinstall.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Click the (+) sign next to "sound, video and game controllers".
  Below, you should see your audio card, right click and select "Properties".
  Select the 'Drivers' tab and click 'uninstall '.
  After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.
  If problems persist, try this same process as a new profile.
  2. to create a new profile:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > select 'users '.
  In the right pane, right click and select 'add a new user '.
  Fill in the appropriate information, and then select 'create '.
  The new user must be added, right click on the new user and select "Properties".
  Select the tab "member of ' and click on 'Add '.
  Type Administrators and click on "check names".
  Once the name is entered correctly, click 'OK '.
  Log off your computer and connect with the new credentials.  Then try removing and reinstalling the driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.