error tpm_tis and without access to the console to alt - f1.

Similar Questions

• Satellite C55-A-1N2 - Windows is broken and without access to the repair option

  Hello

  One of my friends had a Satellite C55-A-1N2 nine November 2013 with windows 8.1.
  The serial number is: yd344983s

  Initially, there was a problem with wifi.
  I found a lot of adware...

  I have uninstall most of them by hand and clean everything with adwcleaner.
  The laptop works very well, I cut the DNS client service and add anti-pupsadware in the hosts file to prevent any new installation of adware.

  Everything was ok and give again to a friend.
  But the new commissioning, windows was slow, unable to connect wifi, enter in the config panel, do anything actually.

  I tried according to manual, press F8 and power, but who turns just to log on windows.
  I also tried F12 and tried to use the CD of windows 7 without success.

  You have ideas of what I can do?
  This looks pretty bad.
  Thank you.

  Mickael
  France.

  If you want to restart the laptop and use the repair options or recovery, you must perform the complete closure. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Reboot the laptop and if you want to use the repair options or recovery check it please the instructions on http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

  PLESE NOTE: do not do some experiences before you have created a recovery media. Use the preinstalled recovery media creator tool and create recovery DVDs or USB.
  If there is a problem, you can use this recovery media to reinstall the original version of Windows.

• Restrited access and without access to the internet

  When I connect my new computer home, he sees all the wifi nearby, and I can connect with my wifi. When I get to the Office I opened the computer, he sees our netgear wifi and wifi. That I connect to our wifi, after a time, she becomes limited or restrited and then I have more access to the internet. What are the causes that she. After that, I do not see any other wifi nearby either.

  I've updated the LAN driver and it solved the problem as you have suggested.

  Tthank you

• EA4500, network drive doesn't work without access to the secure folder

  The map I try the USB hard drive connected to my EA4500 router as a network drive in Windows 7 and it works perfectly until I have enable access to files on the router.

  After enabling file access secure and do not change other settings of the router I first disassemble the drive because it has been implemented without credentials and does that any more.  When I try to remap the drive I use the same address, but select 'Connect using different credentials' when he invites me to the log in info I try to use the router administrator account, but it fails to connect.   Diagnostics Windows network tells me that the device has refused the connection.  I have to create an account on the router in the settings of folder with the same username and password that I use on my computer and tried to connect it without checking 'Connect using different credentials' (and them by manually typing if it matters) with the same results.

  Even with secure file access enabled, I can still reach the reader very well by typing 'ftp://192.168.1.1/' in the file Explorer.  It prompts me for a username and password, I put in the administrator credentials, and I'm in.  The account, I created with the same name of user and password that my computer works this way.

  After you turn off access to the secure folder as everything is working perfectly again...  I'd rather do it with him, however.

  Follow these instructions: http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=25813

  When you click the Browse button, that the router shows up when access to secure files is disabled, but not after it is activated.  I've looked through my sharing settings windows and haven't noticed something that should cause problems, about that everything is allowed.  I also tried disabling my firewall without success.

  Well, that was weird...

  I have reset the router, was able to operate with secure file sharing is enabled, but only, I could get a device connected to the player.  I went in the USB storage on the router settings and started to get a bunch of error 2123 and 2118 s to the point that I was not yet able to change the settings.  On the USB, I noticed a file named "." ftp_share.nfo"what is strange because it seemed sure whether a file instead of a folder in previous tests.  I deleted the folder and all the errors disappeared, had haunted all my settings for the drive into the router, and now it works perfectly...

• Error: 0 x 80070005 access denied: the requested action requires elevated privileges.

  I downloaded and install a copy of assessment of RC of windows 7 build 7100 and use the key to legitimate windows 7 RC to activate and he succeeded.

  After a few days, my pc hangs and after reset, he began asking to activate windows now. Although pressing ok product error '0x80070005' (I am using the administrator account). Even using the command "slmgr.vbs" does not display ' error: 0 x 80070005 access denied: the requested action requires elevated privileges. "

  Please help and thank you.

  Your question has nothing to do with Windows Update (compared to the upgrade of Windows). Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I got lightroom 5.5 on a computer with a hard disk failure. How do I install it on my new computer without access to the old computer?

  I got lightroom 5.5 on a computer with a hard disk failure. How do I install it on my new computer without access to the old computer?

  You can download Lightroom 5.7.1 (the final version of Lightroom 5) from the following Web site: keeping up-to-date for Lightroom

  Lightroom 5.7.1 is a solid version, and you are entitled to it. You will need your serial number to activate the installation.

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• 0 x 80240036 get this error code and don't do the update.

  0 x 80240036 get this error code and don't do the update. Message says "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Ive tried for three days to do the update and I tried at home and at the office, but I get this message.

  I have updated to internet explorer 8, and then it worked.

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and has already managed to success

  Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully.  It's the exact error message, there is NO error code!   It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum.   PLEASE ANSWER!

  

  Hi tracyes31040766,

  If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know how it goes.

  Kind regards

  Nicos

• SUN grant writing back and allows access to the GL

  Hello
  
  SUN grant writing back and allows access to the GL
  
  Sravan

  If ODI can do it then you can assume generally that SUN will not.
  It seems that everyone forgets to press the useful buttons, correct these days.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Allow "Flatten XML" and "Unflatten from XML" to work without access to the internet.

  Hi all

  In my program, I use the XML Unflatten and flatten XML screw. On my development computer, everything works fine. As soon as I put it in the production environment, it has stopped working. I reduced to doing in my production environment, there is no internet access and I'll be never able/allowed to have access to the internet there.

  Someone at - it an elegant way to solve this problem? (By "elegant" I do not want to manually change all of the .xml files that I produce to include the path to the local LVXMLSchema.xsd) Is there a file .manifest or .config can we change to point my program compiled to the xsd on the right file? Perhaps another method?

  Thank you!

  Kind regards

  Filip.

  Hi all

  I think I found the solution.

  In the end, it wasn't an Internet. It was the inclusion of the classes in the compiled code or not.

  Attention! It was not enough just uncheck everything in the "Additional Exclusions" section of the building. I actually had instantiate each class possible, which can be converted by the "XML Unflatten" in the .vi. I even tried to put the lvclasses in the always include the article of the source of the build. This no longer works.

  Thanks for all your suggestions guys!

  Kind regards

  Filip.

• Installed updates XP and now "help" gives just the error message and important icons in the Panel do nothing, HELP!

  I just installed the updates more than 75 for XP and now I can't use 'help' - I just get the error messages like 'bad parameter '. By clicking on the icons in the Panel do nothing important examples: administrative tasks, network and remote access connections. Advanced option under Display\Settings\Advanced not display the options installed with graphics card driver/software. I can't troubleshoot without 'help' HELP! TIA!

  CADJOCK44

  Start over from scratch. See...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internetor a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Access to the consoles to the virtual machines

  Good Morning-

  In our Organization, our service delivery team creates servers and then given "owners of applications.  An obstacle we just met in the deployment of VI3.5 being a service company providing access console on a Windows Server to the owners of the app.  They were accustomed to the presence of a DRAC\HP ILO address which they could benefit when a server has startup problems, etc., which required interfacing with the console.

  Within the world of VMware, is it possible to provide access to an owner of the application server console without providing the VI client?

  Thank you very much.

  Steve

  To generate the URL you will need to log into the VC via the web client.  Use http://nameofyourvirtualcenter

  You may need to double-click the virtual machine when you connect, according to.  At this point, it should display the VM statistics and "generates a URL for the remote console" in the right pane.

• Upgrade to El Capitan without access to the main Apple ID email address

  My girlfriend has upgraded its MacBook Pro 13 inch (2009) for OS X El Capitan 10.11.2 without access to its primary email id apple address. When she tried to log on after restart, as she was sent a verification message to her old email address which she doesn't have access, and I don't seem to be able to point to a new e-mail address, I'm guessing that for reasons of security. She knows the password to his apple ID and created a new apple ID, but she cannot connect to icloud and can not access to its files, photos and work of the University. And no, there is no going back upward.

  Is it possible that it could access its files do not have access to the old email address? She is not precious on the original apple, ID she wants fair access to its things that apparently is not authorized to access.

  Thank you

  James

  Have her contact iTunes to regain the use of the original account

  Contact iTunes Support

  Then she can change contact email address.

  Purchases are locked the account than them, inducing update OSX bought and accounts cannot be merged