Error trying to connect to the server of the identity of the server vcac 6 when trying to new installation
Hello. I am trying to install a vcac6 so I can try it but I get the error message "command execution failed with unexpected error: java.security.cert.CertificateNotYetValidException" when I try to point the camera vcac on device identity when configuring SSO. I did research autour, but found nothing. I have confirmed that all of the communications network is good between the two. Fix fine DNS names. I use self CERT generated for both.
Thanks in advance for any help you can give!
Have you checked to make sure that the two devices are configured to use a time source reliable (NTP)?
Tags: VMware
Similar Questions
-
I need to update my pc, I have windows xp home edition. I had sp2 on my computer, but my system crashed almost and I had to do a total system recovery and it removed my files. Tried to download again, but I can't. I get error could not connect to the server. I have no virus or worms and checked each article are saying sp1 kb. I can't update the Explorer or anything like that
Follow the links in this article to download the Service Packs from Microsoft. You can download on another computer if necessary and move them to your machine to update.
"How to obtain the latest Windows XP service pack"
<>http://support.Microsoft.com/kb/322389 >HTH,
JW -
problems of the DRC of vista for windows machine 7
I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server." Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.
can someone shed light on this please?
Hello
Temporarily disable the security software on both computers and check if it makes a difference.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
Error: Unable to connect to the Converter Server
I'm doing a P2V conversion of base with the converter for .net SDK; However I'm getting unable to connect to the converter server. I use the SDK software on the converter server. Any help would be greatly appreciated.
my properties file is pretty basic:
physicalsource.address=192.168.1.32 physicalsource.username=192.168.1.32\rootcd physicalsource.password=********** physicalsource.ostype=linux physicalsource.agentport=9089 physicalsource.reboot=false vcserver.address=192.168.80.2 vcserver.username=192.168.80.2\administrator vcserver.password=********** conversion.job.name=P2VConversionJob1 conversion.job.description=MyNewVMTest conversion.vmtocreate.name=MyNewVM conversion.vmtocreate.vcpu=1 conversion.vmtocreate.memory=4096 converterserver.address=192.168.80.5 converterserver.username=192.168.80.5\administrator converterserver.password=**********
Here are the results. And I don't know what else I need included. I disabled all firewall server at the moment as well to make sure that they weren't getting in the way.
C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>ConverterSamples.exe cd.p roperties Caught Exception : Name : WebException Message : Unable to connect to the remot e server Trace : at System.Net.HttpWebRequest.GetRequestStream(TransportConte xt& context) at System.Net.HttpWebRequest.GetRequestStream() at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodN ame, Object[] parameters) at ConverterApi.ConverterService.ConverterRetrieveServiceContent(ManagedObjec tReference _this) at ConverterSamples.ConverterConnection.Connect(String serverUrl, String user name, String password) in c:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\Converter Connection.cs:line 51 ERROR: Failed to Connect to Converter Server. C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>
You must be able to connect to the computer you run the samples of the converter (192.168.80.5) on port 443 server machine. You can check the following:
* Converter Server is running
* There is no firewall is blocking the port 443
* There is no other application taking port 443 and not allowing not converter tuned (a web server on the same computer?)
* Converter server is installed in Client-Server mode (by default, it is installed in local mode only and no TCP connections are allowed, but samples SDK only support TCP mode).
-
FDM Create Application Error: Unable to connect to the database.
Hello
While trying to create a new application of FDM, I am not able to connect to the database. error: "unable to connect to the database. Please check the databases and verify the database is '. '. able to connect to the DB using the command line.
I created the user in Oracle with access s/n (provided permissions: RESOURCE, CONNECT, CREATE SESSION, CREATE VIEW, CREATE DATABASE LINK)
Oracle 32-bit client is installed with windows server 2008 R2 64-bit.
I need to update the variable path or any other parameter that needs to be updated.
Please help solve this problem.Hello
I tried test the connection to the database of FDM help a 32-bit UDL file to check the 32-bit Oracle Client is installed and where the provider OLE DB for Oracle was not available.
It was a problem with the installation of the Oracle customer 11.2.0.3, it seems that it is a known bug (NOTE > install the 11.2.0.3 Oracle OLE DB provider since the installation of Client media registers properly the provider [ID 1380742.1] Bug: 13417266 WHILE upgrading from 11.2.0.3, Setup is unable to REGISTER DLL ORAOLEDB).
We have installed Oracle earlier version client and have seen the for Oracle OLEDB provider.
After this created FDM application successfully.Thank you
-
Error "Failed to connect to the remote computer" VMware View Client
Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand. I have already tried Googling every possible thing, but still came short on what to do.
Currently I have:
Server ESXi 3.5
-vCenter Server
-Connection to the server
-3 swimming pools installed individual office xp host w/view agents
At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network. The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded. When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.
I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa. I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above. I tried to disable the firewall on everything, but it still doesn't seem to work. Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.
When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.
You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!
-
Hello
I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.
I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...
I strongly suspect that 1.5 years, someone has renamed the printer. Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow . Otherwise, you could ask your network/system administrator. You should know... Please vote if this has been helpful! Please, click on Brand or propose as answer if that answered your question!
-
"Error 720: a connection to the remote computer could not be established.
Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.
I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.
Hello
Do the methods and check if this solves the problem.
Method 1: Try to run the network troubleshooter, check the link for more information on the same.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method2: You can try the steps outlined in the article and check if this gives a probable solution.
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer
http://support.Microsoft.com/kb/956196
Reset Internet Explorer WARNING:
Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.I hope this helps.
-
Hello.
Hello
Do you have any idea of this error, I went through a few forums, but I still got the same message.
FDM is my server on computer A
and my Foundation + shared on machine B
Error: Unable to connect to the database. Please check the databases and verify the database is accessible.
Hello
Browse the following post
Failed to create the application of FDM
(mark this message as useful or appropriate if that helps!)
concerning
-DM
-
I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?
Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
It will be useful.
-
I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,
Hi Rajendra Patil,
I suggest you to ask your question on the TechNet Forums.
Windows Virtual PC and XP Mode.
http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads
I hope this helps!
-
Hello
I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment
When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?
Thank you
solved by adding the ip address of my ESXI in my macs hosts file
-
Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/
I hope this helps.
-
I use windows 10 on pc. Creative cloud must update. He arrived at 2% and stops, saying: "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom do not work for me right now.
Close applications or contradictory processes
Solve the problems of downloading and installation of Adobe Creative Cloud
Mylenium
-
I want to reinstall our Adobe Acrobat Pro XI because we started to get the error messages. I followed the original instructions, but when I logged in I couldn't find 'My orders' page that is required to install my order. Any ideas?
Barbara,
If you are looking for your serial number, sign in to your account Adobe. On the page for managing accounts that appears, all of your registered products and their serial numbers are listed in the section Plans & products. For more information about the location of the serial numbers, please see find a serial number
Here is the link to download and install the software:
Acrobat X, XI
Guinot
Maybe you are looking for
-
Facebook, scrolling of the stalls on 2 laptops and 1 PC with Firefox 41.0.2. I tried refreshing Firefox, removal of the plug-ins, uninstall and reinstall Firefox, nothing seems to help. My other browser I.E. doesn't have this problem of dropout when
-
Create the Apple ID without credit card to the Japan
I would like to create ID Apple without a credit card. My country is Myanmar. But in the list of countries, Myanmar is not included yet. So, I asked my uncle who stays at the Japan. He said that he cannot create ID without credit card. How can I do t
-
Installed Windows Update and now the computer crashes, used to start
Ideas: : Last night, I installed 2 latest updates of my system (one of them could be KB971644, not too sure though) and after installation, I was prompted to restart. I did it and when it came there's a blue screen saying that windows is trying to fi
-
when im on it that I can navigate about everything, but when I try to click on the logout button, nothing happens. and on facebook, it won't let me click on some things including loging on
-
Hardware inventory to the iDRAC 6
Hi all I use dell servers m610 (iDRAC6). We have built a tool to get hardware information of dell m610 using wsman via iDRAC 6. But when I got some information about hardware (Ram, CPU, HARD disk) using wsman, I had old infofmation. When I installed