Impossible to establish a two-way connection with mac 10.5.8 and officejet 6500 e709a

Similar Questions

• can't print-impossible to establish a two-way communication

  Win7, Lemark printer with a USB connection.  I move the printer to a Win7 computer, where he worked on another computer.  I wanted to use a longer USB cable but removes any new variables I use the same USB cable.  I deleted everything I can find on printing and downloaded the new drivers and install, several times.  As part of the installation, I can print allignment page.  However, when I try to print a test page, I get the message that it cannot print because it is impossible to establish a two-way communication and go into the Setup menu and set two-way communication.  I go to the ports tab in the setup of details and the checkbox for two-way communication is grayed out, so it cannot be set.  How can I get this impression of installation?

  Hi Hustlinghare,

  -What is the exact full error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  I suggest you check out the link for help that is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I set up Windows 7 to use fingerprint or password to logon. How can I get rid of the fingerprint logon and back by connecting with just the user names and passwords?

  I have configured Windows 7 to use the fingerprint or password login screen. I can't footprint material and do not want to use, but can not find where you reconfigure to return by connecting with just user profile names and passwords.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  1. click on start.

  2. click on Control Panel.

  3. click on hardware and sound.

  4. now click biometric devices.

  5. now click on biometric parameters.

  6. now you should check biometrics off the coast of the option button.

  7. click on save changes.

  8. click on close.

  Now search for the question.

  Learn more about the biometric device, you can visit the link provided below.

  http://TechNet.Microsoft.com/en-us/library/dd759228.aspx

  Thank you, and in what concerns:

  I. Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• Two-way-going with USRP n210

  Hi all

  I'm doing a two-way-going using the USRP n210. To be able to do that, I will need to know the exact time that samples have been sent and the time that I have received back.
  Trying to implement that I want to use 2 USRPs linked together.
  (USRP HAS)              (USRP B)
  TX<----------------->
  rx -----------------> tx

  For the porpuses first test, I used a single USRP linking the RX and TX together. With the help of a simple flow in the RRB graph I out a pulse (using the vector source) and at the same time, I have everything from the entrance of the USRP stored in a file (using the file sink block). For comparison, I also used a file sink block in the output.

  Testing again the difference between when I starts the code and the time the impulse arrives at the RX looks like that there is a kind of random delay. The difference between the send and receive in return the pulse fluctuates around 8000 ~ 10000 samples. Because I use a single USRP with RX and TX interconnected I though that this time limit should be almost zero.

  There's a better way to implement what I can get better accuracy in the timestamp?

  One solution that has helped me to solve my problem was using the following code in the code generated by the companion of GNU python:

  now = self.uhd_usrp_sink_0.get_time_now (#Store) the real time of the FPGA
  Self.uhd_usrp_source_0.set_start_time (UHD.time_spec_t (1) + now) #Set the source to start 1 second after the real time of the FPGA
  Self.uhd_usrp_sink_0.set_start_time (UHD.time_spec_t (1) + now) #Set the sink to start 1 second after the real time of the FPGA

  In this way both tx and rx, will begin at the same time.

• How to two-way radios with Wireless Comfort Keyboard 5000 or Wireless mouse 5000

  I have two transceivers, working with the keyboard and the other with the mouse (I've trashed, in each case, one of the pair).  I want to pair the 5000 Microsoft keyboard and mouse to perform a transceiver.

  Hello, Marshall,

  Connecting a Microsoft's Bluetooth device

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/mouse/Bluetooth

  Connect a keyboard using a transmitter/receiver Microsoft Bluetooth with First Connect

  Some models of Bluetooth keyboards include transceivers with buttons on them to make it easier to pair the device to the computer.

  1. Connect the Microsoft Bluetooth transmitter into a USB port.
  2. Press and hold the Connect button on the USB transceiver for five seconds. The Microsoft Connection Wizard appears.
  3. Follow the instructions in the wizard to connect to your device.

  -or-

  1. Start IntelliType Pro.
  2. Make sure you have selected the Bluetooth keyboard that uses your First Connect transceiver.
  3. Click the Wireless tab, and then click connect .
  4. Follow the instructions in the wizard to connect to your device.

  Connect a Bluetooth without First Connect keyboard

  The Wireless Optical Desktop for Bluetooth and the Bluetooth keyboard elite have no First Connect buttons on their radios. For more information on pairing of these keyboards for your computer, see the Bluetooth connection Guide or the documentation that came with your Bluetooth program.

  Connect a keyboard without a Microsoft Bluetooth transceiver

  If your computer is equipped with a built-in Bluetooth transmitter/receiver, you can use to connect your keyboard without using a Microsoft USB transceiver.

  Important

  If you connect with a non Microsoft Bluetooth TRANSCEIVER, some advanced features of the IntelliType Pro software may not work. The IntelliType Pro software is designed to work with the Microsoft Bluetooth software. Toshiba Bluetooth software is known to work in most cases. Other software Bluetooth may work but is not supported.

  1. On your computer, open the Bluetooth program. The Bluetooth program is generally in Control Panel or the Start menu.
  2. Press and hold the button connection on the bottom of the keyboard. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.
  3. In the program of Bluetooth, use the option to add a new device.
     Note
     The exact verbiage may vary slightly between versions and Bluetooth programs.
  4. Follow the instructions. If you are prompted to set up a password, leave the program chooses a password for you.

  Opening the Bluetooth program

  There are several versions of Bluetooth programs that help you to connect your device to your wireless Bluetooth transmitter/receiver. See the documentation provided with your computer or contact the computer manufacturer for more information on how to use their program.

  Note

  If your computer cannot detect a Bluetooth transceiver, Bluetooth software is not available in the Windows menus.

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/keyboard/Bluetooth
   
   
  Microsoft Hardware how - to of
  http://www.Microsoft.com/hardware/en-us/support/how-to
   

• Two-way sync with Google Apps Gmail/Verizon blackBerry smartphones does not

  To navigate on this forum, I see the two-way synchronization of read/delete messages with Gmail should work since early May. However, I was never able to get the two-way synchronization works successfully on my BlackBerry. (I have a Storm 9530 with Verizon, and I use BIS with Google Apps Gmail on my own domain name.)

  Several times over the last couple months, I've tried different combinations of: deleting my account Gmail from BIS and Add again a few hours later. Reset my device; return service directories; ensuring that all my BIS and parameters in the reconciliation of the enamel on my device are in order. But I read in Gmail messages continue to remain not read on my BB has marked more than a day later.

  Notably, sent messages to Gmail appear on my BlackBerry and have since early May. Contacts sync also works as expected. However, no other aspect of the two-way sync seems to work. Is there anything I can try to make it work?

  Postini disabling and modify records MX for ASPMX. L.GOOGLE.COM. et al., then remove and re - integrate my bis account has indeed fixed my problem. Apparently parts of the BIS use MX one records field to determine whether to use Gmail or IMAP ordinary. That's why reconciliation features for Gmail (and some of the features of the plugin improved too, Gmail it looks to) are not available if your Google Apps domain uses the Postini Services.

  Fortunately, I don't require Postini on my domain (because it is just my private domain, I really useless company features;) I allowed him only because that's where ), so that this action has resolved the problem for me. Although this bug could end up biting small businesses that use Google Apps with Postini and want to use BIS; If all goes well it will be fixed in a future BIS release.

• Connectivity with AT &amp; T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• How can I set up separate e-mail folders in Windows Mail to two companies each with its own email address and the password?

  We use Verizon as our ISP.  I was getting our email to two different companies by connecting to Verizon in with another user name and password for each company.  However, we have received messages in our email that we were almost our quota and customer emails we would not come through and have been having rebounded.  I spoke with Verizon and learned to use a 3rd party to channel messages and thus free up space from the server.  They helped me to set up the email to go in Windows Mail, but now all the email for both companies will in the same e-mail account.  How can we separate the email for both companies so that each company can log on to Windows Mail with their own separate IDs and passwords?

  See this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• two-way communication with the web service

  I need help with a problem with web services on 8.6.  I do not know if this is possible.

  I have a web service that works very well.  At this point all it defines a Boolean value.

  For the test, I'm just using IE to see the data.  This works.  I can see the Boolean value change each time I send a 0 or 1 value through the URL.

  My problem is this: when I change the Boolean value, I can't read the value of another application of IE.  In other words, I want to be able to open IE twice in two different windows.  When I change a value of an Internet Explorer session, I want to see the value changes in the other session of IE (after refresh).  From now on, it seems that each session of Internet Explorer is a separate instance of the web service.  How can I edit a Boolean value, and read this variation by another IE session?

  My cause is hopeless?  Are web services 'read only '?  Any help would be appreciated.

  Bad form for the double post but the forum wouldn't let me edit my post:

  

  This VI is a good example of a global LabVIEW 2 style. The registry value at offset uninitialized loop will be persist appealed to the other of this VI. So when the game is true the value of data is stored in the shift register. When all is false the value of the shift register is returned unchanged. Make sure you have 'Keep VI in memory' checked in the configuration of your web service.

  You could do the same thing without parameters selected using two screws separated