error UNMOUNTABLE_BOOT_VOLUME - XP won't start

Similar Questions

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• Help! Laptop won't start up. BSOD "Stop: c000021a {fatal system error}...". »

  I have a laptop Dell Inspiron 1750. Since Sept 09.

  Starting from Saturday, may 8 my system won't start up

  I turn it on it loads the Dell logo, loads the windows logo, and then flashes a blue screen for a split second (the blue screen flashes so quickly that it is difficult to read what he says, so I recorded it and it comes up with "STOP: c000021a {fatal system error} the verification of a knownDLL failed.") system process finished unexpectedly the status of 0xc000012f (0x0007c220 0x00000000) the system has been shut down.) and restarts after the dell logo loading again it goes to a black screen with the options to launch start up repair or start windows normally.

  I have Launced the Startup Repair, after loading files and checking for problems it says then Startup Repair cannot repair this computer automatically. I made the diagnosis and he says there is no problem, I have contatced dell as it is still under warranty but they said this isn't a hardware problem, it is a software problem and infact NOT covered by the warranty and I have to pay £60 to have the support of the software. I don't have a recovery disc and tried to restore the system to an earlier stage. But no luck!

  Was hoping someone here, perhaps a solution. Please please please help!

  Thank you very much
  Ship

  Status 0xc000012f is "STATUS_INVALID_IMAGE_NOT_MZ" - "the file specified image did not have the correct format, it did have an initial MZ." (anecdote: binary windows start with MZ - the initials of Mark Zbikowski - who was a promoter of the MS-DOS product)

  That, with "a knownDLL verification failed."  Basically telling you that you have corrupted files on your system.  Any chance you are able to boot into safe mode or safe mode with command prompt to run SFC/scannow?  Can you somehow shoot out of the system event logs and check the events worthy of attention?  Are you all able to run chkdsk on the drive through the command prompt in the System Recovery Options?

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Won't start, error message empty

  I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7. I exit the application. When I tried to open subsequently, it won't start and the error message is empty (other than the! sign and the "ok" button). I can't find anything in the knowledge base supprt data for help. I do not want to reinstall because then I will use my second and final installation.

  > because then I will use my second and final installation.

  No, you won't.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "davidoconnor123" wrote in message
  News:eavkf4$M4U$1@forums. Macromedia.com...
  > I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7.
  > I
  > exit the application. When I tried to open it later, it doesn't start and
  > the
  > error message is empty (other than the! sign and the "ok" button). I have
  > can not
  > nothing found in the knowledge base supprt data for help. I don't want to
  > reinstall it because then I will use my second and last
  > installation.
  >

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• hpdv6000 won't start - error updates configuration? !!

  My HP Pavilion dv6000 won't start.

  When I turn on my laptop it goes through the normal stages of start-up, however it comes up with "configuration updates: stage 3 of 3-0% complete.". Do not turn off your computer.

  It remains on this page for a few minutes with the hourglass of thing going, but nothing happens - it stays on 0%

  The computer then turns off and turns back on again and repeat the process of a second later.

  I can't clear the checkpoint!

  This morning, I thought that it would be alright because instead of going to the screen updates it came with the users screen. I clicked on my profile, entered my password, but then it froze. ??!!??

  So I have held down the power button, it has left a few minutes and turned back on but not luck.

  Continuing along in circles.

  Help... :/

  Hi catMshaw,

  Take a look at the procedure in this document and let me know if this helps your situation.

• XP without error UNMOUNTABLE_BOOT_VOLUME Office icons. When the safe boot mode.

  original title: xp without desktop icons +.

  Windows xp pro sp 3.  had problems with the startup.  woul computer freezes while loading windows.  would a bot in safemode.  I tried the recovery console and run chkdsk many times until there is no repair.  now the computer won't start but ther r no desktop icons.  the tagb of departure is there and it works.  TaskManager works.  tried to remove exp; orer.exe and retasking taskmanager applicatrions but no change.  I started in menu f8 and the death blue screen UNMOUNTABLE_BOOT_VOLUME.  What is gong on and I've never up this system again?

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Unmountable Boot Volume

  http://support.Microsoft.com/kb/555302

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• Mac OS x won't start on mac pro esxi host

  We have the latest mac pro machine functioning as a construction of host 5.5.0 esxi 2718055.  We have setup the virtual Mac machine of the as a waiter in a magic triangle to our Mac OSX windows domain configuration.  Everything was up and running for some time now not really used because we delayed the purchase of our projected deployment Mac until this year.  I logged on today, and he says he has several updates and necessary to restart, so we issued the command reboot. Now the machine won't start upward.  It starts the boot process you see the Apple logo and progress bar starts moving on a 1/4 of the way and then it just turned off. I tried several of the commands below in the link, but nothing works, it just turns off. I tried to use my mac with vm ware fusion and the connection to the host and always change. I have triple checked that I am in the comments window active when you press these commands, but the problem is it only stays on during approximately 5 seconds then stops. I have removed from the inventory of esxi and re added, as well as restarted the ESXi host as well.  The virtual machine is sitting on the local storage of the esxi server.

  https://support.Apple.com/en-AU/HT201255

  Has anyone else had a problem similar to this?  I'm getting to this section and the progress bar starts to go, but then stops and turns off virtual machine.  How can I enter in address this further.

  

  Okay, so I went through the list and now I got using the command option r. tried before but maybe I press the keys long enough.  I was using my mac book pro and pro fusion to do all this. Couldn't make it work when you use the client heavy vsphere on my windows machine. Repair disk permissions is grayed out. I ran check disk permissions and got a ton of errors, ran check disk and he stopped saying repair the disk. Ran repair disk and he stopped to say that he cannot repair the disk, backup as many files as possible, reformat the drive and restore your backup files.

  Is there another way to try to fix this sucker, or is he at this point a POS and build a new one?

  

  

• MacBook Air 11 "2012 won't start

  My MacBook has been in place and become Finder does not always whenever I try to watch my files.

  So I decided to restart and now it won't start, the startup would always freeze in the middle of the progress bar.

  I tried:

  Repair/check disk + permissions - no problem

  Reset NVRAM memory - still does not start

  Reset SMC - still does not start

  I tried single - user drive is quite well

  Reinstalling OSX - cannot run due to 'this article is temporarily unavailable.

  And finally, the verbose mode and I am skeptical behind the text following code/orders:

  Dynamic code of I080211AWDLPeerManager::configure not support on this device

  I080211AWDLPeerManager::getVHtCapabilityIE cannot get the vht ret 2d capabilities

  EN1: enable successful "Promiscuous" mode

  en0: BSSID changed to XX

  Afree mode detailed of these commands would freeze too.

  I tried almost everything and I don't want to consider formatting my drive, which can also not let me install OSX for the above mentioned reason. So yes, all my options are gone. It's quite frustrating that came from nowhere and that my options are now extremely slim.

  To add my MacBook is no longer a guarantee and it doesn't have the AppleCare.

  I'd appreciate any help, thanks!

  Reinstall OS X without erasing the drive

  HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  If you have no success with the above, try:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• Tablet 2 critical internal battery error 190 now does not start

  Been implemented battery internal criticism 190 on lenovo thinkpad error 2 I bought 2 months ago and now won't start not until after 1 week of charge. Lenovo has a solution.

  Moderator edit: matched the content subject to

  Or anyone in the community has found a solution. Mine is not a problem of cut wire.

  Moderator edit: matched subject to content.

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(