New Satellite P300 won't start.

I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

Symptoms:

* - Some LED lights blink for a second, then they stop again.
* - No fan or drive noise.
I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

Thanks for the tips!

Hello

First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
I think this is the best solution because they can tell you what to do exactly.

Good luck and I m sure that your laptop will be repaired as soon as possible.

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite P300 does not start immediately

    Hello

    My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

    No results?

    Hello

    I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

    Do not press the button quickly several times but slowly and keep it down for a second or two.

  • Satellite L500D won't start

    Hello

    My Toshiba Satellite L500D won't start.

    When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

    I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

    I hope someone can point me in the right direction

    Buddy

    Hello

    Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
    It will be interesting to know what you did with your computer laptop last days.
    Have you installed some day or anything that may be responsible for the issue described?

    Update the BIOS maybe?

  • New Satellite L50-A-1This starts with black screen

    Hello

    I turned on my brand-new Satellite L50-A-1This for the first yesterday set it up which worked like a charm. Today, as I tried to turn it on for the second time, the screen wouldn't come. Although you can hear the snoring treatment unit and also to see the cursor, the screen remains black.

    Any ideas on what is wrong and how to fix it would be greatly appreciated.

    Thank you, c

    When you start your laptop you see Toshiba welcome screen or it's dark all the time?

    It's really not easy to say what the problem is here. Try please to start and press function F4 or FN + F4 key to ensure that it is not defined for output to an external monitor.

  • Satellite P300 does not start because of HARD drive password

    I have a Satellite P300 laptop and it seems to be frozen.
    When I turn it on a blue box rises and requires a HARD drive password before windows turns on, but I can't type the password because there is no cursor.
    None of the buttons work. There is no way to type the password.

    I was wondering if I have to buy a new hard drive and if I do, can get one with more capacity that it is only 149 gb?

    I don t want to buy if its repairable,.

    Thank you

    > None of the buttons work. There is no way to type the password.
    Connect an external USB keyboard and check if you can type the HARD drive password.
    Generally, if you know the HARD drive password, the use of the external USB keyboard should work

    Would it be possible that your keyboard is broken?
    You can access the BIOS F2 press during the startup of the device?

  • Satellite P300 does not start

    My laptop Satellite P300 running Vista will not start. Only, it freezes on the Toshiba Logo.
    I tried to boot into SafeMode using F8, but this does not seem to do anything.

    Can anyone help?

    Thank you

    You have created recovery DVDs as suggested by the reminder of Toshiba?

  • Satellite P300 - 13 M start not at all

    Hello everyone,

    My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

    When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

    This means the end of my laptop?

    Please help me as fast as you guys can't because it's my only laptop work.

    Thank you very much

    PS If you want specs, then I can't give you their. I don't know the specs by heart.

    > This means the end of my laptop?

    No doubt :(

    But try this: remove the battery and ac adapter
    Leave the laptop disconnected for a longer period of time (a few hours)
    Then press the power button / stop along 30 sec.
    Then connect the battery and the AC adapter and try to turn on the unit.

  • Satellite M45 won't start at all

    Greetings! My Satellite M45 seems to be really sick! It started a while the battery dies slowly, and finally, the laptop would refuse to go into the BIOS to the battery power.

    I ordered a new battery (which I'm still waiting) and continued to use the computer laptop external power, but every now and then, he would refuse to boot from an external power supply.

    When you press the power button, the screen 'TOSHIBA Touch with tomorrow' arrives - but with a problem - then crashes (with the fan). The problem (other than the hanging), is that the screen is 'moved' to the left. Rather than fill the entire screen, the start screen "ignores" the rightmost 2 inches and a half inch low and appears in the rest of the screen. Its a little hard to explain...

    This morning, refusing to boot at all!

    Any ideas? I tried to reinstall the ram, turn on/off without battery, only on the battery, I have removed all the 'extras' and am quite a loss now!

    I can't go to the menu of the bios either - so its very frustrating!

    Any help would be great!
    Michele

    Hello

    This s a shame! Description does not sound you well ;(
    For most hardware is malfunctioning if the laptop is unable to successfully pass the TOSHIBA Touch screen with tomorrow!
    Seems the POST (power on self-test) failed!

    I think that there's not a lot to do! The laptop must be professionally checked by an authorized technician. Guys might start and run tests from diagnostics and could locate the source of the fault.

    Call the ASP in your country and describes the history and details. I guess you will have to send the laptop to the service provider authorized ;(

    Good luck

  • New Satellite P850 would not start

    I recently bought a new laptop Satellite P850-32Z (Windows 8) nine only he had yesterday and now I have problem try to start the laptop.

    When I turn on the laptop, I get the Toshiba leading innovation screen then a message saying 'preparation auto repair', then "diagnose your PC" followed by "repair attempt.
    No idea how to solve this problem?

    Each new laptop comes with preinstalled OS, which should be ready for the first start. Just follow the instructions on the screen and I hope that the first start will be prepared properly.

    To be honest I n don't know why this repair message on the screen but just let it work until the end, and after that will happen when this repair procedure will be finished.

    I just hope that you have made the first start with power running and without interruptions.

  • Satellite L30 won't start - error below messages

    Can anyone help please? I have a satellite L30 & out of no where it does not start
    below error. I entered the bios & checked initialize preferences (disk HARD, ETC.)
    but all I get is the message below. I also tried a system restore, but nothing.

    For realtek RTL8139 (X) /8130/ 810 X PCI fast ethernet controller v2.13 (020326)
    PXE - E61: media test failure, check cable of
    PXE - M0F: Existing PXE ROM.
    operating system not found

    When I boot with the recovery CD in I get the message below

    Windows has encountered a problem... etc etc etc the usual windows bit.
    then

    status Oxc0000e9
    Info unexpected i/o error has occurred

    Thank you all
    Mark

    In my opinion, the HARD drive is certainly the reason why the laptop tries to boot from LAN.
    Yes, the laptop computer tries to boot from LAN and, therefore, the error message (PXE - E61: media test failure, check cable) is displayed.

    I think that a HARD drive replacement and the new installation of the OS will help you solve this problem.

    Greetings

  • Satellite M35 won't start

    Hello

    I received a laptop from a friend who asked me to try and fix it. The problem, it seems to have is the following:

    When you press the power button, the phone begins to launch, the Toshiba logo appears on the screen as well as the message press F2 for Setup or other. Unfortunately, it is that he will.
    If I press F2, the text at the bottom of the screen changes to enter Setup... but in fact is not (and I left for a long time, just in case). The person who brought it tells me that she was burning a CD and the laptop has frozen, then rebooted and showed the same behavior since then.

    I tried a new set of RAM as well as to try to boot from a CD, neither of which he seems to want to do.
    If I press ESC just before that the laptop shows the Toshiba logo, the boot sequence appears and stops at mouse initialized (if this help anyone)

    I know that I could send the laptop into a Toshiba repair center, but they are trying to keep the cost of the repair from the bottom. The laptop is also two years is not eligible for the guarantee.

    Any help or advice on what to try would be great because I am all of these ideas!
    Thank you
    Steve

    Hello Steve

    I understand that this person doesn t want to help, but you must know that at some point there is not much to do. If you are not able to enter the BIOS setting there is something wrong with the machine.

    You can try to press F8 after starting up laptop to see what is happening, but as I said there must be a serious hardware problem. If nobody here can help you, please communicate with the service. No you don't have to give them a unit to repair, but you can just talk to them and see if the issue as it is known and how much the repair will be cool.

    Good luck and please keep us posting if you know more about it.

  • Satellite M40x won't start after upgrade CPU test

    I have a portable M40x I took the CPU out of it to replace it with another to test the computer started fine then I stopped and took out and put it's original return CPU, and it wouldn't start. Now it primer with any one of all the CPU. When I turn on the power, all I get is a white screen for a few seconds and the laptop is closed down. Both the CPU is good because I since tested on other computers to make sure that this was not the problem.

    Anyone has any ideas on what is the cause?

    I m not surprised.
    As far as I know, Toshiba does not support updates, and it is not advisable to do something like that.
    It of one that the replacement of CPU on laptops is not easy and not recommended.
    The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

    He was awarded the new heat paste? It s necessary and important if you want to connect again the CPU.

    It is perhaps a reason for not starting.
    I think more details you will get from the service guy in your country

  • My Satellite L500D won't start

    Hello
    Really hope someone can help me. My dog was able to chomp through the power my laptop (while the laptop was turned off but plugged in). I managed to get the laptop to start on battery and everything was ok. I have a new power suppy (Toshiba official replacement) and when I plug it in the power light and the battery light is steady orange/red but nothing happens. I tried all the usual, remove battery type stuff but she just does not start.
    I would have thought that I had done something important, if it wasn't the fact that it worked very well until the battery was low.

    Would appreciate it really all suggestions, she is only 14 months old so I hope that this is not a great case of the laptop case in heaven :-(

    With regard to the dog!

    Hello

    What is the voltage and amperage of this new adapter? Is this the same mark as based on the laptop?

    What exactly happens when you press the power button?

  • New inspiron 3650 won't start

    Saturday, I had a new inspiron 3650. I ran through the stuff to start and then I have it turned off and tried to install a new video card. The video card requires more energy than the 3650 has so I tried to replace the power supply. The new power supply was inconsistent with the 3650 so I put back the power SUPPLY original and the GPU. Now when I try to run just the power light blinks yellow. Fans start, but there is no input or output. That is, the monitor has no signal and the keyboard and mouse do not work. I have no idea of what is happening and any help would be appreciated.

  • Satellite C650 won't start - status: 0xc00000e9

    Laptop suddenly froze while I was on the internet.
    The mouse was still usable, but I could do nothing else — or even stop or restart.

    So I forced stop and tried to turn it back on, now it started, however, first of all, a screen will appear indicating "readers", and then I was faced with a screen with a list of writing on this subject.

    He said that I should contact the hardware manufacturer and known as the 'status' 0xc00000e9 and "info" as "an unexpected i/o error has occurred", I'm unable to boot up the laptop and have gone through the troubleshooting list.

    _ * HELP! * _

    Hey Buddy,

    You can start Windows in safe mode? Before you press F8 key to enter the start menu Windows Advanced to start Windows, and then select Safe mode. If you can start the computer, it seems to be just a driver issue.

    And before contacting an authorized service provider that I would try to reinstall Windows from Toshiba recovery disc. If you can test it with factory again.

Maybe you are looking for